The development of Internet of Things (IoT) systems is a rapidly evolving scenario, thanks also to newly available low-power wide area network (LPWAN) technologies that are utilized for environmental monitoring purposes and to prevent potentially dangerous situations with smaller and less expensive physical structures. This paper presents the design, implementation and test results of a flood-monitoring system based on LoRa technology, tested in a real-world scenario. The entire system is designed in a modular perspective, in order to have the capability to interface different types of sensors without the need for making significant hardware changes to the proposed node architecture. The information is stored through a device equipped with sensors and a microcontroller, connected to a LoRa wireless module for sending data, which are then processed and stored through a web structure where the alarm function is implemented in case of flooding.

It is necessary to ensure safety in terms of health and accidents through the real-time monitoring of the construction site environment and workers. This problem has become of great importance due to the economic and social implications. Therefore, a sensor-based approach has been found to be beneficial in Building Information Modeling (BIM). Wireless Sensor Network (WSN) technologies are well-suited for the deployment of monitoring systems. A suitable technical solution for node communication in a WSN is Long Range (LoRa) modulation technology. In this study, an autonomous LoRa-based system for the monitoring of a construction site in Lungro, Calabria, Italy, is presented. The spatial monitoring of working personnel is achieved by employing a tracker device with an Inertial Measurement Unit (IMU) and a Global Positioning System (GPS) device. Accesses of personnel and gear to the site are registered using Radio Frequency Identification (RFID) tags equipped with protective gear. Fixed-position solar-powered sensor nodes are also employed for structural monitoring, i.e., movement sensors are used to monitor the variation of scaffolding, building structures, and under-work housing inclinations. Long Range Wide Area Network (LoRaWAN) gateways interface with the nodes and the internet for data exchange, enabling an Internet of Things (IoT) paradigm for the monitoring solution. A comprehensive overview of the workers and structural nodes, along with the RFID access management system and LoRaWAN gateway features, is provided in this article. A description of the web interface is also reported.

Finding a free parking lot contributes largely to a total traffic congestion and increases gas emissions in urban and overpopulated cities. Recent advances in smart parking systems adopt Internet of Things (IoT) concepts which tend to improve traffic bottlenecks by providing information about available parking lots. The detection of vehicle presence at the parking lot usually means adopting solutions comprised of power-hungry and battery-operated sensor devices. In this article a hardware-based approach is introduced which aims at building a self-powered and autonomous sensing node equipped with supercapacitors (battery less) to feel the vehicle presence. For purposes of detection, solar-based energy harvester and wake-up trigger prototype is considered along with a Bluetooth low-energy (BLE) radio. The joint use of such technologies is exploited to develop a power autonomous node capable of cost-effectively sensing the car presence and transmitting the parking lot status. The developed triggering system consumes only 150 nA making it suitable as a low-power solution. To initiate the trigger only 6.5 W/m ² in light level change is required comparing the two panels, which is more than adequate as the comparison of solar irradiance measured under the vehicle against diffuse horizontal irradiance shows a significant difference. The developed prototype uses a magnetometer to verify the vehicle presence upon trigger generation and BLE 5.0 technology for status change update, while supercapacitor discharge lifetime duration is estimated to be around 13 days in harsh conditions without charging from solar cells.

This paper deals with the definition and analysis of a complete electronic system for the detection and monitoring of stability characteristics in complex scenarios such as structural elements or environmental events. For instance, it may be successfully adopted to detect rockfall events on protection barriers, as well as to monitor landslides or the integrity of structures like bridges and buildings. The system is completely autonomous thanks to the implementation of an energy harvesting architecture and realizes a wireless sensor network whose nodes are auto-configurable, making it possible to freely arrange them in situ. The continuously collected data are relative to acceleration, inclination, position, and temperature of each node. These data are transmitted and stored on a remote web server devoted to the automatic management of alarms and accessible for data consulting. The proposed system is currently operating in different experimental fields in Italy.

Rockfalls and landslides are hazards triggered from geomorphological and climatic factors other than human interaction. The economic and social impacts are not negligible, therefore the topic has become an important field in the application of remote monitoring. Wireless sensor networks (WSNs) are particularly suited for the deployment of such systems, thanks to the different technologies and topologies that are evolving nowadays. Among these, LoRa modulation technique represents a fitting technical solution for nodes communication in a WSN. In this paper, a smart autonomous LoRa-based rockfall and landslide monitoring system is presented. The structure has been operating in Pantelleria Island, Sicily, Italy. The sensing elements are disposed in sensor nodes arranged in a star topology. Network access to the LoRaWAN and the Internet is provided through gateways using a portable, solar powered device assembly. A system overview concerning both hardware and functionality of the nodes and gateways devices, then a power analysis is reported, and a monthly recorded result is presented, with related discussion.