Duccio Gallichi Nottiani

Dr. Duccio Gallichi Nottiani

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 November 2023 in Clean Technologies
Verified
Journal Article
Open access
PDF file
SLStefano De Luca
Stefano De Luca
DMDaniel Milanese
Daniel Milanese
DNDuccio Gallichi Nottiani
Duccio Gallichi Nottiani
ACAntonella Cavazza
Antonella Cavazza
CSCorrado sciancalepore
Corrado sciancalepore
Biopolymers obtained from renewable resources are an interesting alternative to conventional polymers obtained from fossil resources, as they are sustainable and environmentally friendly. Poly(lactic acid) (PLA) is a biodegradable aliphatic polyester produced from 100% renewable plant resources and plays a key role in the biopolymer market, and is experiencing ever-increasing use worldwide. Unfortunately, this biopolymer has some usage limitations when compared with traditional polymers; therefore, blending it with other biopolymers, such as poly(butylene succinate) (PBS), poly(butylene succinate-co-butylene adipate) (PBSA), poly(butylene adipate-co-butylene terephthalate) (PBAT) and different poly(hydroxyalkanoates) (PHA), is considered an interesting method to improve it significantly, customize its properties and extend the range of its applications. The following review highlights, in its first part, the physico-chemical and mechanical properties of PLA in comparison to the other biopolymers listed above, highlighting the various drawbacks of PLA. The second part of the review deals with recent developments, results, and perspectives in the field of PLA-based blends.

8 December 2019 in International Journal of Applied Glass Science
Verified
Journal Article
Open access
PDF file
DNDuccio Gallichi Nottiani
Duccio Gallichi Nottiani
Diego PuglieseDiego Pugliese
Diego Pugliese
NBNadia Giovanna Boetti
Nadia Giovanna Boetti
DMDaniel Milanese
Daniel Milanese
Davide JannerDavide Janner
Davide Janner
The steps toward the fabrication of directly extruded microstructured fiber preforms made of a bioresorbable phosphate glass are herein presented, analyzing the features of the process from the glass synthesis to the manufacturing of the fiber. The realization of these fibers leverages on three main pillars: an optically transparent bioresorbable glass, its extrusion into a preform, and the fiber drawing. The glass has been designed and carefully prepared in our laboratory to be dissolvable in a biological fluid while being optically transparent and suitable for both preform extrusion and fiber drawing. To support the production of an optimized die for the preform extrusion, a simplified laminar flow model simulation has been employed. This model is intended as a tool for a fast and reliable way to catch the complex behavior of glass flow during each extrusion and can be regarded as an effective design guide for the dies to fulfill the specific needs for preform fabrication. After die optimization, extrusion of a capillary was realized, and a stacking of extruded tubes was drawn to produce a microstructured optical fiber made of bioresorbable phosphate glass.

1 November 2023 in ACS Omega
Verified
Journal Article
Open access
ERElisa Restivo
Elisa Restivo
Diego PuglieseDiego Pugliese
Diego Pugliese
DNDuccio Gallichi Nottiani
Duccio Gallichi Nottiani
JSjosè camilla sammartino
josè camilla sammartino
NBNora Bloise
Nora Bloise
LVLivia Visai
Livia Visai
Calcium phosphate glasses (CPGs) are acquiring great importance in the biomedical field because of their thermomechanical and bioresorbable properties. In this study, optically transparent copper (1 mol %)-doped calcium phosphate glasses (CPGs_Cu) were prepared through the melt-quenching method, and their biocompatibility and antibacterial and antiviral properties were evaluated and compared with undoped CPGs. Biocompatibility was evaluated on murine fibroblast NIH-3T3 cells as a preliminary study of cytocompatibility. The in vitro tests were performed through indirect and direct cytotoxicity analyses by MTT and Alamar Blue assays and supported by electron microscopy observations. Microbiological analyses were performed against the most common Gram-negative and Gram-positive pathogens that cause nosocomial infections: Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae, Staphylococcus aureus, and the methicillin-resistant Staphylococcus aureus strain. In addition, the bioglass samples were exposed to SARS-CoV-2 to assess their effects on viral survival. The obtained results assessed the biocompatibility of both bioglass types and their ability to reduce the viral load and trap the virus. In addition, Cu2+-doped bioglass was found to be antibacterial despite its low content (1 mol %) of copper, making this a promising candidate material for biomedical applications, e.g., surgery probes, drug delivery, and photodynamic therapy.

28 March 2024 in Sensors
Verified
Journal Article
Open access
PDF file
JCJacopo Corona
Jacopo Corona
STStefano Tondini
Stefano Tondini
DNDuccio Gallichi Nottiani
Duccio Gallichi Nottiani
RSRiccardo Scilla
Riccardo Scilla
AGAndrea Gambaro
Andrea Gambaro
Roberto LolliniRoberto Lollini
Roberto Lollini
The continuous monitoring of indoor environmental quality (IEQ) plays a crucial role in improving our understanding of the prominent parameters affecting building users’ health and perception of their environment. In field studies, indoor environment monitoring often does not go beyond the assessment of air temperature, relative humidity, and CO2 concentration, lacking consideration of other important parameters due to budget constraints and the complexity of multi-dimensional signal analyses. In this paper, we introduce the Environmental Quality bOX (EQ-OX) system, which was designed for the simultaneous monitoring of quantities of some of the main IEQs with a low level of uncertainty and an affordable cost. Up to 15 parameters can be acquired at a time. The system embeds only low-cost sensors (LCSs) within a compact case, enabling vast-scale monitoring campaigns in residential and office buildings. The results of our laboratory and field tests show that most of the selected LCSs can match the accuracy required for indoor campaigns. A lightweight data processing algorithm has been used for the benchmark. Our intent is to estimate the correlation achievable between the detected quantities and reference measurements when a linear correction is applied. Such an approach allows for a preliminary assessment of which LCSs are the most suitable for a cost-effective IEQ monitoring system.

1 January 2025 in Advances in Polymer Technology
Verified
Journal Article
Open access
SLStefano De Luca
Stefano De Luca
KMKerstin Mueller
Kerstin Mueller
LTLorenzo Tomei
Lorenzo Tomei
DNDuccio Gallichi Nottiani
Duccio Gallichi Nottiani
DMDaniel Milanese
Daniel Milanese
CSCorrado sciancalepore
Corrado sciancalepore
Brewer’s spent grains (BSGs) are lignocellulosic sources that can be considered promising economic alternatives to wood as biofillers to produce wood–plastic composites (WPCs). Given the high protein content (25 wt.%) of BSGs, alkaline hydrolytic solid–liquid (S/L) extractions were carried out at different pHs, with the goal of extracting as much protein as possible without altering or compromising the quality of the lignocellulosic matrix. Biocomposites with 10–50 wt.% biofiller were produced by blending polybutylene succinate (PBS) and poly(hydroxybutyrate‐co‐hydroxyhexanoate) (PHBH) with native BSG (BSG), BSG treated at pH 10.5 (BSG‐S2_T2) and BSG treated at pH 12 (BSG‐S2_T3). The injection‐molded compounds were characterized in terms of structural, rheological, mechanical, morphological, and thermal properties to investigate the potential impact of different biofillers on the overall compatibility of the two different biopolymer matrices as an alternative to conventional wood flour‐based WPCs. Fourier transform infrared (FT‐IR) spectra, thermal (differential scanning calorimetry [DSC]), and morphological (scanning electron microscope [SEM]) analyses revealed only minor interactions. The melt flow rate (MFR) analyses showed the increased viscosity in PBS‐based biocomposites when the filler concentration increased. In contrast, for PHBH‐based composites, an increase in MFR values was obtained under the same test conditions, with a maximum peak of 97% for S2_T3 30 wt.% filler. From a mechanical point of view, the addition of reinforcing fibers led to a more significant increase in Young’s modulus ( E ) in PBS‐based composites as the biofiller content increased, up to 98%, compared to pure PBS. On the contrary, in PHBH‐based composites, the addition of fillers led to a significantly lower increase, with values between 14% and 20% compared to pure PHBH. The tensile strength ( σ B ) and elongation at break ( ε B ) decreased proportionally in the two biopolymer matrices as the percentage of natural filler increased, with properties similar to traditional WPCs. These results are consistent with the literature and support the application of PBS and PHBH biocomposites filled with BSG as an environmentally friendly alternative to conventional plastics.

9 July 2026 in Molecules
Verified
Journal Article
Open access
PDF file
SGSonia GAAIED
Sonia GAAIED
LZLeilei Zhang
Leilei Zhang
Terenzio BertuzziTerenzio Bertuzzi
Terenzio Bertuzzi
LLLucrezia Lamastra
Lucrezia Lamastra
PBPier Paolo Becchi
Pier Paolo Becchi
NSNicoleta Alina Suciu
Nicoleta Alina Suciu
The monitoring of environmental pollution has attracted growing attention to per- and polyfluoroalkyl substances (PFASs) due to their long persistence and resistance to natural degradation. Despite extensive research into the occurrence of PFASs in the environment, their interactions with biodegradable polymers remain understudied, highlighting a substantial knowledge gap regarding their adsorption capacity and associated toxicological implications. Therefore, the main objective of the present study was to evaluate PFAS adsorption onto biodegradable microplastics (BMPs) and compare their behavior to non- BMPs. Although biodegradable plastics (BPs) are generally considered environmentally friendly polymers, the present study indicates that they can act as vectors for PFASs as shown by LC-MS-MS analysis. Based on the current results, PFAS adsorption depends on the polymer type and PFAS chemical structure. Although BMPs are not the only carriers of PFASs, compared with various natural particles, their persistence and mobility can still influence the transport and bioavailability of PFASs in the environment. Future studies are required for assessing the environmental fate of PFASs in systems containing biodegradable polymer, in order to enhance predictive accuracy and mitigate associated risks to both the environment and human health.