Seaports are at the forefront of global trade networks, serving as hubs for maritime logistics and the transportation of goods and people. To meet the requirements of such networks, seaport authorities are investing in advanced technologies to enhance the efficiency and reliability of port infrastructures. This can be achieved through the digitalization and automation of core systems, aimed at optimizing the management and handling of both goods and people. Furthermore, a significant effort is being made towards a green energy transition at seaports, which can be supported through marine renewable sources. This promotes energy-mix diversification and autonomy, whilst reducing the noteworthy environmental footprint of seaport activities. By analyzing these pertinent topics under the scope of a review of container-terminal case studies, and these ports’ respective contexts, this paper seeks to identify pioneering smart seaports in the fields of automation, real-time management, connectivity and accessibility control. To foster the sustainable development of seaports, from an energy perspective, the potential integration with marine renewable-energy systems is considered, as well as their capabilities for meeting, even if only partially, the energy demands of seaports. By combining these fields, we attempt to construct a holistic proposal for a “model port” representing the expected evolution towards the seaports of the future.
1 March 2021 in Renewable and Sustainable Energy Reviews
Seaports are highly energy demanding infrastructures and are exposed to wave energy, which is an abundant resource and largely unexploited. As a result, there has been a rising interest in integrating wave energy converters (WEC) into the breakwaters of seaports. The present work analyzes the performance of an innovative hybrid WEC module combining an oscillating water column (OWC) and an overtopping device (OWEC) integrated into a rubble mound breakwater, based on results of a physical model study carried out at a geometrical scale of 1:50. Before the experimental tests, the device’s performance was numerically optimized using ANSYS Fluent and WOPSim v3.11. The wave power captured by the hybrid WEC was calculated and the performance of the two harvesting principles discussed. It was demonstrated that hybridization could lead to systems with higher efficiencies than its individual components, for a broader range of wave conditions. The chosen concepts were found to complement each other: the OWEC was more efficient for the lower wave periods tested and the OWC for the higher. Consequently, the power production of the hybrid WEC was found to be less dependent on the wave’s characteristics.
Sea ports are infrastructures with substantial energy demands and often responsible for air pollution and other environmental problems, which may be minimized by using renewable energy, namely electricity harvested from ocean waves. In this regard, a wide variety of concepts to harvest wave energy are available and some shoreline technologies are already in an advanced development phase. The SE@PORTS project aims to assess the suitability and viability of existing wave energy conversion technologies to be integrated in harbor breakwaters, in order to take advantage of their high exposure to ocean waves. This paper describes the experimental study carried out to assess the performance of a hybrid wave energy converter (WEC) integrated in the rubble-mound structure that was proposed for the extension of the North breakwater of the Port of Leixões, Portugal. The hybrid concept combines the overtopping and the oscillating water column principles and was tested on a geometric scale of 1/50. This paper is focused on the assessment of the effects of the hybrid WEC integration on the case-study breakwater, both in terms of its stability and functionality. The 2D physical model included the reproduction of the seabed bathymetry in front of the breakwater and the generation of a wide range of irregular sea states, including extreme wave conditions. The experimental results shown that the integration of the hybrid WEC in the breakwater does not worsens the stability of its toe berm blocks and reduces the magnitude of the overtopping events. The conclusions obtained are therefore favorable to the integration of this type of devices on harbor breakwaters.
The combined exploitation of wave and offshore wind energy resources is expected to improve the cost competitiveness of the wave energy industry as a result of shared capital and operational costs. In this context, the objective of this work is to explore the potential benefits of co-locating CECO, an innovative wave energy converter, with the commercial WindFloat Atlantic wind farm, located on the northern coast of Portugal. For this purpose, the performance of the combined farm was assessed in terms of energy production, power smoothing and levelised cost of energy (LCoE). Overall, the co-located farm would increase the annual energy production by approximately 19% in comparison with the stand-alone wind farm. However, the benefits in terms of power output smoothing would be negligible due to the strong seasonal behaviour of the wave resource in the area of study. Finally, the LCoE of the co-located farm would be drastically reduced in comparison with the stand-alone wave farm, presenting a value of 0.115 per USD/kWh, which is similar to the levels of the offshore wind industry as of five years ago. Consequently, it becomes apparent that CECO could progress more rapidly towards commercialisation when combined with offshore wind farms.
Despite the efforts of developers, investors and scientific community, the successful development of a competitive wave energy industry is proving elusive. One of the most important barriers against wave energy conversion is the efficiency of the devices compared with all the associated costs over the lifetime of an electricity generating plant, which translates into a very high Levelised Cost of Energy (LCoE) compared to that of other renewable energy technologies such as wind or solar photovoltaic. Furthermore, the industrial roll-out of Wave Energy Converter (WEC) devices is severely hampered by problems related to their reliability and operability, particularly in open waters and during harsh environmental sea conditions. WEC technologies in multi-purpose breakwaters—i.e., a structure that retains its primary function of providing sheltered conditions for port operations to develop and includes electricity production as an added co-benefit—appears to be a promising approach to improve cost-effectiveness in terms of energy production. This paper presents the proof of concept study of a novel hybrid-WEC (HWEC) that uses two well understood power generating technologies, air and water turbines, integrated in breakwaters, by means of a composite modelling approach. Preliminary results indicate: firstly, hybridisation is an adequate approach to harness the available energy most efficiently over a wide range of metocean conditions; secondly, the hydraulic performance of the breakwater improves; finally, no evident negative impacts in the overall structural stability specific to the integration were observed.