In this paper, a thermal performance assessment of traditional building constructions and configurations in various Moroccan climates is carried out. This research focuses on enhancing conventional energy efficiency of buildings by investigating the thermal behavior of single clay walls, double clay walls, simple brick walls, and double brick walls based on long-term meteorological data using TRNSYS software. The roof pitch, thermal comfort and discomfort index, and building energy consumption are considered while selecting buildings for each temperature zone. It is noticed that the double brick construction is more efficient in all climatic zones of Morocco. Thus, this material reduces the yearly energy requirement of building by 22% to 25% compared to the usual brick building. On the coldest winter days, a 30° south-facing roof raises the internal temperature by 2.5 °C compared to a horizontal roof. Temperature increases could reduce the air conditioning energy usage by 7% to 32% and overcooling hours by 12% to 21% in cities above 30° N. In addition, the findings are interesting enough to inspire individuals to implement the recommended construction design and study energy efficiency and thermal comfort in Moroccan buildings. Consequently, reducing energy consumption, mitigating climate change, and lowering greenhouse gas emissions.

Nowadays, renewable energies are capturing the world's attention, particularly in light of the phenomenon of climate change and carbon dioxide emissions, which have caused major environmental damage. As a result, many investors have recently focused on developing investments in renewable energy projects worldwide, specifically photovoltaic and concentrated solar power plant projects. These solar technologies are considered among the most profitable solutions for generating power from a natural, free, and unlimited energy source. This review paper discusses one of the most significant issues affecting the performance of these solar systems, which is known as soiling. It has been supported by several studies in various nations with different climatic conditions, which offered accurate empirical data on the degradation rate of photovoltaic and concentrated solar power systems’ production due to the soiling effect. Furthermore, it provides various mitigating soiling ways, including manual and autonomous cleaning methods for both solar technologies. Ultimately, it summarizes each cleaning technique's main advantages and drawbacks, specifying its applicability according to the location characteristics and climatic conditions. Additionally, the review results reported in this work are intriguing enough to warrant further development of concentrated solar power and photovoltaic technologies.

To provide a comprehensive review of additive manufacturing use in heat transfer improvement and to carry out the economic feasibility of additive manufacturing compared to conventional manufacturing. Heat transfer improvement is particularly interesting for different industrial sectors due to its economic, practical, and environmental benefits. Three heat transfer improvement techniques are used: active, passive, and compound.According to numerous studies on heat transfer enhancement devices, most configurations with strong heat transfer performance are geometrically complex. Thus, those configurations cannot be easily manufactured using conventional manufacturing. With additive manufacturing, almost any configuration can be manufactured, with the added benefit that the produced parts’ surface characteristics can enhance heat transfer. It can, however, lead to a significant pressure drop increase that will reduce the overall performance. In the given article, a comparison of the capital cost of a 100 MW parabolic trough power plant has been carried out, considering two types of solar receivers; the first is manufactured using conventional methods, and the second uses additive manufacturing. The heat transfer of the new receiver configuration is investigated using computational fluid dynamics through ANYS Fluent.Although the cost of additive manufacturing machines and materials is high compared to conventional manufacturing, the outcome revealed that the gain in efficiency when using additive-manufactured receivers leads to a reduction in the number of receiver tubes and the number of solar collectors needed in the solar field It implies a considerable reduction of parabolic trough collector plant capital cost, which is 20.7%. It can, therefore, be concluded that, even if initial setup expenses are higher, additive manufacturing could be more cost-effective than traditional manufacturing.With the reduction of the parabolic trough collector plant capital cost, the levelized cost of electricity will eventually be reduced, which will play a role in increasing the use of solar thermal energy.No review studies discuss the manufacturing potential and cost-effectiveness potential of additive manufacturing when producing heat transfer improvement equipment, especially when producing long pieces. In addition, the paper uses a novel receiver configuration to investigate the economic aspect.