Mohsen Saffari Pour

Prof. Dr. Mohsen Saffari Pour

Mechanical Engineering Department, Shahid Bahonar University of Kerman, Kermān, Iran
orcid
Assistant Professor, Industry Consultant and Working on Flui...

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 January 2017 in Metallurgical and Materials Transactions B
Verified
Journal Article
Open access
PDF file
MKMania Kazemi
Mania Kazemi
Mohsen Saffari PourMohsen Saffari Pour
Mohsen Saffari Pour
DSDu Sichen
Du Sichen
Gaseous reduction by hydrogen was performed for three types of hematite pellets, two from industry and one prepared in the laboratory. The reduction mechanisms of the pellets were studied based on the morphologies of the partially reduced samples. Two mechanisms were found, the mechanisms of the two types of industrial pellets being very similar. The degree of reduction was followed as a function of time for each type of pellets. On the basis of the reaction mechanism of the industrial pellets, a mathematical model was developed. As a pioneer effort, the model combined the computational fluid dynamics approach for the flow and mass transfer in the gas phase with model of gas diffusion in the solid phase as well as the description of the chemical reaction at the reaction sites. The calculation results agreed well with the experimentally obtained reduction curves. The present work also emphasized the importance of evaluation of the reduction mechanisms and the properties of different types of iron ore pellets prior to developing a process model. While the present approach has established a good foundation for the dynamic modeling of the shaft reactor, more efforts are required to accomplish a realistic process model.

8 June 2020 in Energies
Verified
Journal Article
Open access
PDF file
AAAmmar I. Alsabery
Ammar I. Alsabery
Ishak HashimIshak Hashim
Ishak Hashim
AHAhmad Hajjar
Ahmad Hajjar
MGMohammad Ghalambaz
Mohammad Ghalambaz
SNSohail Nadeem
Sohail Nadeem
Mohsen Saffari PourMohsen Saffari Pour
Mohsen Saffari Pour
The present investigation addressed the entropy generation, fluid flow, and heat transfer regarding Cu-Al 2 O 3 -water hybrid nanofluids into a complex shape enclosure containing a hot-half partition were addressed. The sidewalls of the enclosure are made of wavy walls including cold isothermal temperature while the upper and lower surfaces remain insulated. The governing equations toward conservation of mass, momentum, and energy were introduced into the form of partial differential equations. The second law of thermodynamic was written for the friction and thermal entropy productions as a function of velocity and temperatures. The governing equations occurred molded into a non-dimensional pattern and explained through the finite element method. Outcomes were investigated for Cu-water, Al 2 O 3 -water, and Cu-Al 2 O 3 -water nanofluids to address the effect of using composite nanoparticles toward the flow and temperature patterns and entropy generation. Findings show that using hybrid nanofluid improves the Nusselt number compared to simple nanofluids. In the case of low Rayleigh numbers, such enhancement is more evident. Changing the geometrical aspects of the cavity induces different effects toward the entropy generation and Bejan number. Generally, the global entropy generation for Cu-Al 2 O 3 -water hybrid nanofluid takes places between the entropy generation values regarding Cu-water and Al 2 O 3 -water nanofluids.

12 August 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MZMohammad Zaboli
Mohammad Zaboli
Seyed Soheil Mousavi AjarostaghiSeyed Soheil Mousavi Ajarostaghi
Seyed Soheil Mousavi Ajarostaghi
SSSyfollah Sadodin
Syfollah Sadodin
Mohsen Saffari PourMohsen Saffari Pour
Mohsen Saffari Pour
In the present work, a parabolic trough solar (PTC) collector with inner helical axial fins as swirl generator or turbulator is considered and analyzed numerically. The three-dimensional numerical simulations have been done by finite volume method (FVM) using a commercial CFD code, ANSYS FLUENT 18.2. The spatial discretization of mass, momentum, energy equations, and turbulence kinetic energy has been obtained by a second-order upwind scheme. To compute gradients, Green-Gauss cell-based method has been employed. This work consists of two sections where, first, four various geometries are appraised, and in the following, the selected schematic of the collector from the previous part is selected, and four various pitches of inner helical fins including 250, 500, 750 and 1000 mm are studied. All the numerical results are obtained by utilizing the FVM. Results show that the thermal performance improvement by 23.1% could be achieved by using one of the proposed innovative parabolic trough solar collectors compare to the simple one. Additionally, the minimum and maximum thermal performance improvement (compare to the case without fins) belong to the case with P = 250 mm by 14.1% and, to the case with P = 1000 mm by 21.53%, respectively.

9 June 2020 in Nanomaterials
Verified
Journal Article
Open access
PDF file
AAAmmar I. Alsabery
Ammar I. Alsabery
MGMohammad Ghalambaz
Mohammad Ghalambaz
Taher ArmaghaniTaher Armaghani
Taher Armaghani
ACAli Chamkha
Ali Chamkha
Ishak HashimIshak Hashim
Ishak Hashim
Mohsen Saffari PourMohsen Saffari Pour
Mohsen Saffari Pour
The mixed convection two-phase flow and heat transfer of nanofluids were addressed within a wavy wall enclosure containing a solid rotating cylinder. The annulus area between the cylinder and the enclosure was filled with water-alumina nanofluid. Buongiorno’s model was applied to assess the local distribution of nanoparticles in the host fluid. The governing equations for the mass conservation of nanofluid, nanoparticles, and energy conservation in the nanofluid and the rotating cylinder were carried out and converted to a non-dimensional pattern. The finite element technique was utilized for solving the equations numerically. The influence of the undulations, Richardson number, the volume fraction of nanoparticles, rotation direction, and the size of the rotating cylinder were examined on the streamlines, heat transfer rate, and the distribution of nanoparticles. The Brownian motion and thermophoresis forces induced a notable distribution of nanoparticles in the enclosure. The best heat transfer rate was observed for 3% volume fraction of alumina nanoparticles. The optimum number of undulations for the best heat transfer rate depends on the rotation direction of the cylinder. In the case of counterclockwise rotation of the cylinder, a single undulation leads to the best heat transfer rate for nanoparticles volume fraction about 3%. The increase of undulations number traps more nanoparticles near the wavy surface.

1 August 2020 in International Journal of Heat and Mass Transfer
Verified
Journal Article
Closed access
MGMohammad Ghalambaz
Mohammad Ghalambaz
SMS.A.M. Mehryan
S.A.M. Mehryan
MMMasoud Mozaffari
Masoud Mozaffari
SHSeyed Mohsen Hashem Zadeh
Seyed Mohsen Hashem Zadeh
Mohsen Saffari PourMohsen Saffari Pour
Mohsen Saffari Pour

1 August 2020 in Thermal Science and Engineering Progress
Verified
Journal Article
Closed access
HAHamed Arjmandi
Hamed Arjmandi
PAPezhman Amiri
Pezhman Amiri
Mohsen Saffari PourMohsen Saffari Pour
Mohsen Saffari Pour