Samuel Frans-Joseph Blair

Mr. Samuel Frans-Joseph Blair

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 June 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
SBSamuel Frans-Joseph Blair
Samuel Frans-Joseph Blair
JMJoshua S. Male
Joshua S. Male
SCStuart Cavill
Stuart Cavill
CRChristopher P. Reardon
Christopher P. Reardon
TKThomas F. Krauss
Thomas F. Krauss
Indium tin oxide (ITO) has recently gained prominence as a photonic nanomaterial, for example, in modulators, tuneable metasurfaces and for epsilon-near-zero (ENZ) photonics. The optical properties of ITO are typically described by the Drude model and are strongly dependent on the deposition conditions. In the current literature, studies often make several assumptions to connect the optically measured material parameters to the electrical properties of ITO, which are not always clear, nor do they necessarily apply. Here, we present a comprehensive study of the structural, electrical, and optical properties of ITO and showed how they relate to the deposition conditions. We use guided mode resonances to determine the dispersion curves of the deposited material and relate these to structural and electrical measurements to extract all relevant material parameters. We demonstrate how the carrier density, mobility, plasma frequency, electron effective mass, and collision frequency vary as a function of deposition conditions, and that the high-frequency permittivity (ϵ∞) can vary significantly from the value of ϵ∞ = 3.9 that many papers simply assume to be a constant. The depth of analysis we demonstrate allows the findings to be easily extrapolated to the photonic characterisation of other transparent conducting oxides (TCOs), whilst providing a much-needed reference for the research area.

1 July 2024 in Optical Materials Express
Verified
Journal Article
Open access
SBSamuel Frans-Joseph Blair
Samuel Frans-Joseph Blair
JMJoshua S. Male
Joshua S. Male
CRChristopher P. Reardon
Christopher P. Reardon
TKThomas F. Krauss
Thomas F. Krauss
Metasurfaces have become integral elements of the modern nanophotonics toolkit, finding applications in many areas of photonics. With the recent rise in the use of transparent conducting oxides (TCOs), there is a desire to fabricate metasurface structures directly into materials such as indium tin oxide (ITO) to utilize their tunability and non-linear effects. Current ITO dry etching techniques use harsh chemically active gases such as Cl2 or environmentally damaging gases such as CH4. As a result, etching processes often require metal masks and aggressive metal etchants that can damage deposited ITO thin films. Here, we present a straightforward reactive ion etch (RIE) using green and environmentally friendly source gases, namely an Ar and H2 gas mix, together with a soft resist mask. By variation of the process parameters, an optimal etch condition is realised, producing uniform features for nanoscale structures at a steady rate of 15 nm/min for small features (< 50 nm). As a proof of concept, guided-mode resonance (GMR) gratings are fabricated in ITO thin films, with the optical results showing a comparably high reflection and Q-factor to common silicon nitride GMR gratings. Hence, this work provides an environmentally friendly alternative for dry etching ITO, in addition to highlighting the potential of ITO as a photonic material for future applications.

6 March 2026 in ACS Nano
Verified
Journal Article
Open access
SBSamuel Frans-Joseph Blair
Samuel Frans-Joseph Blair
MKMinahil Khan
Minahil Khan
CRChristopher P. Reardon
Christopher P. Reardon
SJSteven Johnson
Steven Johnson
TKThomas F. Krauss
Thomas F. Krauss
The dynamic control of light at the nanoscale has been a longstanding challenge in photonics. More recently, fluidics has been added to the toolkit, leveraging liquid properties as an additional degree of freedom for tunability. Here, we present a tunable metasurface architecture that integrates an optofluidic layer. We use a guided mode resonance platform, whereby a silicon nitride grating is coated with indium tin oxide (ITO) as the active material, operating in the visible-NIR wavelength range (∼800 nm). Our design employs an all-dielectric structure with a fluidic gate to overcome the efficiency-loss trade-off typical of other dynamic metasurfaces. We demonstrate spectral and phase tuning, achieving a near-2π phase shift with a low voltage swing (±3 V), as well as maintaining a strong resonance amplitude (R > 80%) with an all-pass filter configuration. These results establish a foundation for high-performance tunable metasurfaces with broad cross-disciplinary applications.

20 July 2025 in bioRxiv
Verified
Preprint
Open access
STStephen Thorpe
Stephen Thorpe
SBSamuel Frans-Joseph Blair
Samuel Frans-Joseph Blair
GPGiampaolo Pitruzzello
Giampaolo Pitruzzello
Casper Kunstmann-OlsenCasper Kunstmann-Olsen
Casper Kunstmann-Olsen
CRChristopher P Reardon
Christopher P Reardon
SJSteven Johnson
Steven Johnson
A comprehensive miniaturised biosensing platform needs to detect multiple analytes, which often rely on different transduction mechanisms for their detection and quantification. This necessitates the development of multimodal sensors capable of simultaneous measurements without interference between measurement modalities. Guided mode resonance (GMR) biosensors are highly sensitive to refractive index changes and well suited to out-of-plane optical coupling, but have not previously been implemented in a multimodal configuration. Here, we present the electrochemical guided mode resonance (EC-GMR) sensor, a Si 3 N 4 GMR photonic grating integrated with an indium tin oxide (ITO) electrode that enables concurrent optical and electrochemical sensing. Finite difference time domain (FDTD) simulations show that the resonance wavelength of the GMR shifts as a function of ITO thickness and applied bias. These findings are validated experimentally using EC-GMR devices fabricated with a range of ITO thicknesses. We demonstrate that the EC-GMR achieves a refractive index sensitivity of 84.4 nm/RIU while simultaneously measuring the double-layer capacitance. To highlight its multimodal capability, we characterise the optical and electrochemical responses of methylene blue, a widely used redox reporter in biosensing. By integrating photonic and electrochemical modalities in a compact format, the EC-GMR platform provides critical analytical information beyond that which could be obtained from a traditional single-modality sensor. This approach extends the analytical utility of GMR sensors and represents a robust, adaptable solution for diverse biosensing applications, from clinical diagnostics to environmental monitoring.