With the spread of sustainability concepts, due to the global energy crisis and the unrestrained consumption of natural resources, the importance of rational use and reduction of energy consumption has been intensified, albeit in short steps. This concern has taken up bioclimatic concepts in buildings, especially housing buildings for low-income people, aiming at improving the quality of housing production in terms of its habitability. The objective of this research is to theoretically and experimentally study the natural ventilation in a housing building, which fits into the low-cost pattern. The use of Computational Fluid Dynamics to predict natural ventilation was adopted as a tool to perform these analyses. Experiments were carried out by visiting the study area to collect data on air velocity, temperature, and relative humidity in all rooms of the residence in order to carry out the intended analyses. Computer simulation of natural ventilation considering the building with the doors and windows open and with fixed geometry was performed. Results proved that the proposed mathematical model was able to reproduce, with rich details and physical coherence, the internal and external air flow inside the building, indicating better internal ventilation performance in environments that have door and window openings, with recesses, revealing the importance of cross ventilation to reduce the internal temperature and consequent improvement in thermal comfort. The idea is to help civil engineers and specialists in the economically viable design of low-cost buildings from the economic, social, and thermal comfort points of view.
Fresh bananas are fruits with high moisture content after harvest and are submitted to a drying process to minimize waste and increase shelf life. This work aims to experimentally study the convective drying of bananas in an oven with hot-air recirculation, evaluating the geometric shape during moisture removal and product heating. Hand-peeled whole-banana samples, cut into longitudinal and transversal slices were dried at temperatures of 40 and 70 °C. Results of drying kinetics, heating and dimensional variations in terms of surface area and volume are presented and analyzed. It was found that cut bananas dry, heat up and change their dimensions faster than bananas in their natural form and that the area/volume relationships and the air temperature influence the drying kinetics, heating and volumetric variations of the fruit.
With the growing human awareness of trying to reduce the environmental impact in today’s world, the development of new sustainably based materials has been the increasing focus of industry and academia. Biocomposites are environmentally friendly materials produced from raw materials synthesized from renewable sources. In this sense, this work aims to characterize and evaluate the mechanical and thermal performances of biocomposites manufactured from a thermoplastic matrix of high-density bioethylene and obtained from ethanol produced from sugarcane and reinforced with organophilic montmorillonite clay. For this, polyethylene grafted with maleic anhydride (PE-g-MA) was used as a compatibilizer. Dry biocomposites with 1, 3, and 5% organophilic montmorillonite clay, by weight, were subjected to structural (FTIR and DRX), thermal (DSC), thermogravimetric (TG/DTG), thermodynamic–mechanical (DMA), morphological (SEM and MET), and mechanical (tensile, flexural, impact, and shore D hardness tests) characterizations. The DMA experiments were carried out within the viscoelastic region of the polymer. From the obtained results, we notice that, in general, there was an increase in the properties of high-density biopolyethylene (B-HDPE) (without compromising its processability), and therefore, the automotive application of biocomposites compatible with PE-g-MA, containing low levels of organophilic montmorillonite clay, is recommended.