The risk of lightning exposure increases as wind turbine size increases, and lightning accidents have grown up to be a severe threat to wind turbines. The present paper focuses on the influence of the changes in atmospheric conditions around the rotating blade for the upward leader initiation. A 2D computational fluid dynamics model was established to obtain the air pressure distribution around the blades, and the simplified inception model was used to determine the initiation of the upward leader mechanism. In this paper, two significant factors of velocity and attack angle were studied. The results show that the trigger height is about an 11.2% difference for 120 m/s with the peak current of return stroke at 30 kA; the difference has reached about 28% for the attack angle of 10°. The research indicates that the area with higher air pressure is exposed to a greater risk of lightning strikes, and the probability of lightning strikes will increase as the blade attack angle increases.
Lightning is a long-gap high-current discharge event in nature, and its enormous discharge energy can cause structural damage to struck objects. Relevant studies have shown that aircraft in the air are exposed to a higher risk of lightning strikes than ground objects. However, most studies on aircraft lightning strikes have used static models, and there are still shortages of research objects under high-speed movements. Therefore, it is necessary to conduct an investigation of the lightning strike characteristics of aircraft under dynamic conditions to ensure flight safety fully. In this study, the lightning strike characteristics of airfoil under dynamic conditions have been simulated by studying two variables, airspeed and angle of attack, while employing the Leader Progression Model (LPM). The results show that adjustments in the angle of attack cause changes in the atmospheric pressure field, and a maximum pressure difference of up to 5.44 × 104 Pa is observed at the angle of attack of 15°, which results in a change in the average electric field strength , leading to a 33.63% difference in the upward leader trigger height. At an airspeed equal to 120 m/s, the trigger height in the low-pressure region is only 54.7% of that in the high-pressure region (435 m and 795 m, respectively). A higher lightning strike risk is found in areas of higher air pressure and is positively correlated with angle of attack and airspeed.
There has been a growing demand for clean energy in recent years, with the advancement of the carbon neutrality vision. Wind power has occupied a significant percentage of clean energy sources. Usually deployed in open fields, on mountaintops, and in offshore areas, wind turbines are particularly vulnerable to lightning strikes due to their unique operational characteristics. Therefore, accurately evaluating the lightning strike risk of wind turbines is an important issue that should be addressed. Current IEC standards lack a physically grounded approach for calculating the equivalent collection area, leading to an overestimation of this value. This paper employs an upward leader initiation model to develop a novel calculation method for the equivalent collection area of wind turbines. By considering the impact of upward leader channel initiation and development, the model demonstrates accuracy through comparison with observational data (0.7761 strikes/year), showing only a −7.1% discrepancy. This study also examines the impact of various blade rotation angles, stepped leader speeds, and peak current of the return stroke on the equivalent collection area. Results indicate that the lightning strike distance specified in IEC standards underestimates the equivalent collection area due to neglecting the upward leader channel, resulting in significant differences compared to our approach, with a maximum deviation of up to 313.12%.
Hydraulic manipulators face critical challenges due to valve dead-band nonlinearity and state constraints, which can lead to safety hazards and hardware damage. This study proposes a state-constrained controller with valve dead-band compensation to ensure prescribed positioning accuracy and operational safety. Barrier Lyapunov functions ensure that state constraints are maintained and that boundary violations are avoided. Concurrently, a smooth dead-band inverse model is developed to offset asymmetric valve dead-band effects without inducing chatter. Adaptive laws estimate uncertain parameters and dead-band impact in real time, and a disturbance observer attenuates unmatched uncertainties. Dynamic surface control is employed to diminish the explosion of complexity in backstepping design. Comparative simulations under fixed-angle and arbitrary-angle tracking demonstrate that the proposed controller achieves superior tracking accuracy with steady-state errors below 0.04° compared to 0.06° for non-compensated controllers, while significantly reducing pressure fluctuations and control chattering as adaptive parameters converge. The results indicate that the strategy effectively compensates for valve dead zones while strictly maintaining state constraints, thereby achieving the required control precision for hydraulic servo systems.