An arc-sprayed Fe-based amorphous coating with high hardness and low porosity was prepared. A tribo-electrochemical approach was used to study the tribocorrosion behaviour of the amorphous coating. The volume wear losses of the amorphous coating with different sliding paths in dry, 0.9% NaCl, and PBS solutions were measured, as well as the friction coefficient and the polarization curves in static and dynamic situations. The volume wear loss with the linear sliding path is higher than those with circular and triangle paths. Since the ions in the solution accelerate the wear, the volume loss of the amorphous coating in 0.9% NaCl solution is higher than dry and in PBS solution. The wear loss of 316L stainless steel (SS) is about 1.7 times more than the amorphous coating in PBS solution under a load of 10 N. Although 316L SS possesses better corrosion resistance than the amorphous coating in the static situation, the corrosion resistance of the amorphous coating is much better than that of 316L SS during tribocorrosion. The wear mechanism of the amorphous coating includes abrasive wear accompanying with corrosive wear. For the intrinsic superior corrosion resistance, amorphous coating shows the prospective tribology application in the corrosion environment.
There has been a growing demand for clean energy in recent years, with the advancement of the carbon neutrality vision. Wind power has occupied a significant percentage of clean energy sources. Usually deployed in open fields, on mountaintops, and in offshore areas, wind turbines are particularly vulnerable to lightning strikes due to their unique operational characteristics. Therefore, accurately evaluating the lightning strike risk of wind turbines is an important issue that should be addressed. Current IEC standards lack a physically grounded approach for calculating the equivalent collection area, leading to an overestimation of this value. This paper employs an upward leader initiation model to develop a novel calculation method for the equivalent collection area of wind turbines. By considering the impact of upward leader channel initiation and development, the model demonstrates accuracy through comparison with observational data (0.7761 strikes/year), showing only a −7.1% discrepancy. This study also examines the impact of various blade rotation angles, stepped leader speeds, and peak current of the return stroke on the equivalent collection area. Results indicate that the lightning strike distance specified in IEC standards underestimates the equivalent collection area due to neglecting the upward leader channel, resulting in significant differences compared to our approach, with a maximum deviation of up to 313.12%.
This paper conducts revisions of the existing elastic-plastic contact models for a single asperity with the fractal surface topographies generated from W-M functions. The expressions of the critical parameters and the contact load-area relationship are deduced in the terms of fractal parameters, asperity's base diameter and material properties. Numerical analysis suggest that the contact models' critical parameters derived strictly in a convincing and easier way in this study are scale-dependent on the asperity's base size and determined jointly by fractal parameters, asperity's base diameter and material properties. The transformation condition for an asperity transfers from elastic to plastic contact and the contact load-area relationship are consistent with those in classical contact mechanics but contrary to the existing fractal contact models.
Hydraulic manipulators face critical challenges due to valve dead-band nonlinearity and state constraints, which can lead to safety hazards and hardware damage. This study proposes a state-constrained controller with valve dead-band compensation to ensure prescribed positioning accuracy and operational safety. Barrier Lyapunov functions ensure that state constraints are maintained and that boundary violations are avoided. Concurrently, a smooth dead-band inverse model is developed to offset asymmetric valve dead-band effects without inducing chatter. Adaptive laws estimate uncertain parameters and dead-band impact in real time, and a disturbance observer attenuates unmatched uncertainties. Dynamic surface control is employed to diminish the explosion of complexity in backstepping design. Comparative simulations under fixed-angle and arbitrary-angle tracking demonstrate that the proposed controller achieves superior tracking accuracy with steady-state errors below 0.04° compared to 0.06° for non-compensated controllers, while significantly reducing pressure fluctuations and control chattering as adaptive parameters converge. The results indicate that the strategy effectively compensates for valve dead zones while strictly maintaining state constraints, thereby achieving the required control precision for hydraulic servo systems.