Dielectric insulators with patterned topographic relief were used in dielectric barrier discharge (DBD) plasmas operating at atmospheric pressure to spatially define the formation of filamentary microdischarges (“plasma streamers”). Precise localization of microdischarge streamers is demonstrated with concomitant treatment patterns on surfaces, enabling localized etching, surface micro-texturing, and chemically and structurally induced wettability modification without the use of lithographic masks on the sample. Proof-of-concept examples include generation of arbitrary streamer patterns (lines, arrays, and letters), anisotropic etching of PMMA films, and spatial patterning of Teflon to be hydrophilic. The approach herein allows user-defined patterning of DBD streamers for subsequent modification and treatment of surfaces (e.g., roughness, wettability, etc.), materials deposition, or etching.
Background cold atmospheric plasma (CAP) is known to be a surface-friendly yet antimicrobial and activating process for surfaces such as titanium. The aim of the present study was to describe the decontaminating effects of CAP on contaminated collagen membranes and their influence on the properties of this biomaterial in vitro. Material and Methods: A total of n = 18 Bio-Gide® (Geistlich Biomaterials, Baden-Baden, Germany) membranes were examined. The intervention group was divided as follows: n = 6 membranes were treated for one minute, and n = 6 membranes were treated for five minutes with CAP using kINPen® MED (neoplas tools GmbH, Greifswald, Germany) with an output of 5 W, respectively. A non-CAP-treated group (n = 6) served as the control. The topographic alterations were evaluated via X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Afterward, the samples were contaminated with E. faecalis for 6 days, and colony-forming unit (CFU) counts and additional SEM analyses were performed. The CFUs increased with CAP treatment time in our analyses, but SEM showed that the surface of the membranes was essentially free from bacteria. However, the deeper layers showed remaining microbial conglomerates. Furthermore, we showed, via XPS analysis, that increasing the CAP time significantly enhances the carbon (carbonyl group) concentration, which also correlates negatively with the decontaminating effects of CAP. Conclusions: Reactive carbonyl groups offer a potential mechanism for inhibiting the growth of E. faecalis on collagen membranes after cold atmospheric plasma treatment.
18 August 2023 in Journal of Vacuum Science & Technology A
Magnesium and magnesium alloys such as magnesium-lithium are of great interest for the application as biodegradable implants. To control the degradation, a tailoring of the corrosion rate is needed. In this study, the effect of a short (5–20 s) dielectric barrier discharge plasma treatment in ambient air on the corrosion rate of magnetron sputtered Mg and MgLi thin films is presented. The treatment with atmospheric plasma of as sputtered samples leads to a decrease of the corrosion rate of 45%−50% in Hanks’ balanced salt solution. The higher corrosion resistance is influenced by a change in surface structure and a formation of an MgCO3 containing film.
8 February 2025 in Advanced Materials Technologies
Functional metal‐polymer nanocomposites are required for highly tailored surface properties and coatings. However, past approaches like cosputtering, physical evaporation, or plasma polymerization can not retain the functionality of the polymer matrix or produce tailored nanoparticles. A new kind of codeposition of nanocomposite polymer thin films is presented via the combination of a gas aggregation cluster source (GAS) and initiated chemical vapor deposition (iCVD) in a common GAS+iCVD vacuum system. iCVD delivers ultraprecise and defect‐free polymer thin films on the nanoscale while a GAS creates nanoparticles that form in the gas phase and can be tuned in size and composition. Using the GAS+iCVD system, nanocomposites of well‐defined Ag nanoparticles in a chemically intact PTFE polymer thin film are prepared. The deposited nanocomposite proved applicable in antibacterial applications by decreasing the colony‐forming units of Enterococcus faecalis by 38%. Antiviral SARS‐CoV‐2 Spike‐ACE‐2 binding inhibition reaches 65% of pure silver nanoparticles. The nanocomposite improves the apoptotic gene expression for liver cancer cells compared to pure thin films. This new kind of codeposition paves the way for the fabrication of functional nanocomposite thin films combining the advantages of the iCVD polymer palette with a large variety of nanoparticles that can be prepared by GAS.
Photoswitchable polymers are of great interest for a variety of applications such as optical data storage, functional membranes and photoactuators. The latter are typically fabricated by wet-chemical approaches including gels, liquid-crystalline elastomers and supramolecular polymers. In this work we demonstrate the fabrication of a new freestanding photoswitchable aeropolymer-structure via solvent-free, single-step initiated chemical vapor deposition (iCVD) using tetrapodal zinc oxide (t-ZnO) as sacrificial substrate material. On the molecular scale, the copolymer is composed of 2-hydroxyethyl methacrylate (HEMA) and a specifically synthesized diazocine (a bridged azobenzene) as photoswitchable cross-linking unit. iCVD enables in this connection a combination of both comonomers while preserving their chemical functionalities as well as the individual structure of the t-ZnO templates without pore clogging. After post-reactional etching and drying, a hollow polymer network with nanoscopic thin walls remains maintaining the substrate characteristic tetrapodal structure, which we coined aero-photoswitch. We identify and differentiate specific properties of the fabricated structures, originating from the switchable copolymer and the highly porous tetrapodal conformation, for a comprehensive description of the overall aero-structures. These aero-photoswitchable polymers provide unique properties due to their extremely delicate yet stable morphology and their efficient transformation of molecular photoisomerization to motion on the macroscopic scale upon illumination with blue light. In addition, we investigate their biocompatibility as well as successful cell attachment and proliferation. These new photoswitchable actuators turn out to be highly promising smart materials for future research on photoswitchable scaffolds.