The MRD with continuously adjustable damping, small compression, and large extension for asymmetric output may improve all-terrain vehicle impact resistance and vibration reduction performance in a variety of conditions. A novel conical flow channel asymmetric MRD (CFC-MRD) is proposed to solve the structure complexity stroke sacrifice, and lack of failure protection concerns in currently studied asymmetric MRD structures. In the design, the non-parallel plate magnetic circuit characteristics of CFC-MRD are investigated, including theoretical analysis and finite element modeling, and the correctness of the model is proved by testing. Considerations in multi-objective optimization include special performance imposing extra restrictions, and making the work more complicated and prone to local optima. To address this, the Nelder–Mead approach is utilized, which decreases the complexity of the optimization model while simultaneously managing performance conflicts. And a collaborative optimization strategy employing Comsol and Matlab tools is applied to improve optimization efficiency. The greatest difference between theoretical optimized values and real values is less than 6.77% in the experiments, showing the efficiency of the CFC-MRD structure design and optimization process.
22 February 2024 in Smart Materials and Structures
The integration of magnetorheological (MR) semi-active suspension systems in all-terrain vehicles (ATV) has garnered significant attention due to their ability to enhance damping performance and off-road capabilities. However, traditional control strategies result in poor control accuracy and limited vibration reduction effects when facing complex road excitations and impact disturbances. With technological advancements, enhanced vehicle environmental perception and road sensing capabilities have made it possible to implement model predictive control (MPC) for vehicle suspensions. Nevertheless, traditional MPC is limited in vehicle suspension applications due to its high computational complexity. To address these issues, this study introduces an explicit model predictive control based on road preview (EMPC-P). Firstly, road data obtained through a non-contact measurement method enables the system to perceive road excitation information in advance. Subsequently, a 7 Degree-of-Freedom (7-DOF) suspension model incorporating road excitations is constructed. By adhering to system constraints and employing a multiparameter optimization method, the control problem based on rolling optimization is transformed into an explicit polyhedral system. The offline precomputation of control state relations enhances the computational efficiency of the control system. Through this approach, the designed EMPC allows the vehicle suspension system to make optimal control decisions quickly and accurately in response to complex driving conditions, thus improving the damping effect of the system. Through a combined approach of simulation and experimental validation, the designed EMPC-P controller is compared with the Skyhook controller under preview and non-preview states, respectively. Empirical testing confirms that the EMPC-P exhibits superior damping effects, significantly improving vehicle ride comfort and handling stability.
Single-rod magneto-rheological dampers (MRD) have the advantages of a simple mechanism, high reliability, and broad application range. They are widely used in various semi-active vibration control fields. However, their working mode requires a compensating mechanism to perform volume compensation on the rod, leading to additional stiffness for the system. Ignoring this point makes it tough to establish an accurate mechanical model to describe its performance in the design stage, affecting its application. To address this issue, this study proposes a multi-physics simulation model based on gas compensation for single-rod MRD to characterize their mechanical performance accurately. Firstly, the mechanism and mechanical model of the single-rod gas compensation MRD are introduced. Secondly, considering that its performance is affected by the coupling effect of multiple physical fields, including magnetic, flow, and solid mechanics fields, the control equations and boundary conditions of each field are analyzed separately, and a multi-physics coupling simulation model is established by COMSOL. In particular, the gas compensation unit is considered in the multi-physics simulation model. The effect of the compensating mechanism on the mechanical performance of the damper under different excitation speeds, currents, and initial pressures is analyzed. Finally, the accuracy of the proposed method is verified through the demonstration power test. The results show that the simulation can describe the additional stiffness in the damper. The average error between experimental value and simulation value is 7%. This demonstrates the degree of agreement between the experiment and simulation.
This study proposed a novel asymmetric conical flow channel magnetorheological damper (CFC-MRD) for all-terrain vehicles (ATVs) to handle complex excitations with coexisting shocks and vibrations. CFC-MRD produces adjustable damping forces by utilizing magnetically controlled properties and achieves asymmetric force output (moderate compression force and strong extension force) with conical flow channels. This design could effectively absorb and dissipate energy. The paper first illustrates the structure and asymmetric principle of CFC-MRD. Then, the mechanism of asymmetric force generation in a non-parallel flat plate is derived, and utilizes the hydrodynamic theory to derive the pressure difference of Bingham fluid between the non-parallel plates. Considering the coexistence of vibration and shock, the study proposes a theoretical switch model that distinguishes between low and high velocity states based on the Reynolds number. Finally, the validity of the model is verified by experiments, and the results show that the CFC-MRD achieves the desired asymmetric force output. The asymmetric force ratio rises with higher excitation speed and drops with increased drive current. At a speed of 1 m s−1 without any applied current, the maximum asymmetric force reaches 1.21. The small peak error, averaging only 2.57%, between experimental and theoretical results affirms the accuracy of the proposed switch model.
Magnetorheological dampers (MRD) are increasingly used in smart structural damping systems due to their good damping properties. In practical applications, as a nonlinear device, the parameters of the internal excitation coil of the magnetorheological damper will change during operation under the influence of the temperature and external environment, deteriorating the dynamic performance of the output current of the driver and reducing the damping effect of the system. Therefore, the current driver needs to be optimized for this phenomenon in order to ensure accurate current output. In this paper, a mathematical model of the buck circuit combined with the MRD equivalent circuit is established, and after analyzing the model, the parameters of the PI controller are rectified to lay the foundation for the design of the adaptive law. Then, with the help of the fuzzy control method, a fuzzy PI control strategy for MRD current driver is established, which enables the current driving system to adjust the control parameters adaptively when the MRD parameters change and ensure the accurate driving current output. The experimental results demonstrate that the fuzzy PI control strategy has a stronger robustness in the face of parameter changes of the control object compared with the traditional PI control at a system parameter change rate of 40%.
Purpose: In the vibration reduction field, constrained stand-off layer damping cylindrical shell plays an important role. However, due to the lack of accurate analysis of its damping characteristics, this hinders its further research and application. Therefore, the purpose of this paper is concerned with an accurate solution for the vibration-damping characteristics of a constrained stand-off-layer damping cylindrical shell (CSDCS) under various classical boundary conditions and conducts a further analysis. Design/methodology/approach: Based on the Rayleigh–Ritz method and the Hamilton principle, a dynamic model of CSDCS is established. Then the loss factor and the frequency of CSDCS are obtained. The correctness and convergence behavior of the present model are verified by comparing the calculation results with the literature. By using for various classical boundary conditions without any special modifications in the solution procedure, the characteristics of CSDCS with S-S, C-C, C-S, C-F and S-F boundaries are discussed. Findings: The Rayleigh–Ritz method is effective in handling the problem of CSDCS with different boundaries and an accurate solution is obtained. The boundary conditions have an important influence on the vibration and damping behavior of the CSDCS. Originality/value: Based on the Rayleigh–Ritz method and Hamilton principle, a dynamic model of CSDCS is established for the first time, and then the loss factor and frequency of CSDCS are obtained. In addition, the effectiveness of adding the stand-off layer between the base shell and the viscoelastic layer is confirmed by discussing the characteristics of CSDCS with S-S, C-C, C-S, C-F and S-F boundaries.