Halide Nur Dursun

Ms. Halide Nur Dursun

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 June 2023 in Minerals
Verified
Journal Article
Open access
PDF file
Fırat BuratFırat Burat
Fırat Burat
NDNazlım İlkyaz Dinç
Nazlım İlkyaz Dinç
HDHalide Nur Dursun
Halide Nur Dursun
Ugur UlusoyUgur Ulusoy
Ugur Ulusoy
The increasing world population and the development of technology have boosted the demand for electrical and electronic equipment (EEE). Equipment that has completed its life cycle causes serious damage to the environment due to its toxic components. In addition, it contains many more base metals (copper, aluminum, nickel, lead, tin, etc.) and precious metals (silver, gold, palladium, platinum, etc.) compared with a run of mine ore. Recycling these values with an economic and environmental understanding will ensure sustainability and prevent the rapid depletion of natural resources. Specific gravity, magnetic, electrostatic, optical, surface, thermal, and other property differences between particles as well as the shape, size, and distribution of individual particles directly determine the success of the recycling process. By determining the behavior of the particles during enrichment and producing grains suitable for enrichment with better performance in the size reduction stage, the quality of the concentrate to be subjected to the final chemical/metallurgical treatment will be enhanced. The main aim of this study is to reveal the effect of particle size and shape properties on the recovery of valuable metals from two different waste electrical and electronic equipment (WEEE) sources, end-of-life printed circuit boards and waste electric wires, using environmentally friendly, easier-to-use, and cost-effective mechanical, physical, and physiochemical processes. Deciding on the most suitable enrichment process after detailed characterization of the products obtained from different comminution equipment and their particle size and shape directly affected the amount, content, and recovery of the final concentrate.

25 July 2025 in Minerals
Verified
Journal Article
Open access
PDF file
Furkan NazlıFurkan Nazlı
Furkan Nazlı
IHIşıl Hasdemir
Işıl Hasdemir
EUEmircan Uysal
Emircan Uysal
HDHalide Nur Dursun
Halide Nur Dursun
UGUtku Orçun Gezici
Utku Orçun Gezici
SGSebahattin Gürmen
Sebahattin Gürmen
Lithium-ion batteries (LiBs) are utilized in numerous applications due to advancements in technology, and the recovery of end-of-life (EoL) LiBs is imperative for environmental and economic reasons. Pyrometallurgical and hydrometallurgical methods have been used in the recovery of metals such as Li, Co, and Ni in the EoL LiBs. Hydrometallurgical methods, which have been demonstrated to exhibit higher recovery efficiency and reduced energy consumption, have garnered increased attention in recent research. Inorganic acids, including HCl, HNO3, and H2SO4, as well as organic acids such as acetic acid and citric acid, are employed in the hydrometallurgical recovery of these metals. It is imperative to acknowledge the environmental hazards posed by these acids. Consequently, solvometallurgical processes, which involve the use of organic solvents with minimal or no water, are gaining increasing attention as alternative or complementary techniques to conventional hydrometallurgical processes. In the context of solvent systems that have been examined for a range of solvometallurgical methods, deep eutectic solvents (DESs) have garnered particular interest due to their low toxicity, biodegradable nature, tunable properties, and efficient metal recovery potential. In this study, the leaching process of black mass containing graphite, LCO, NMC, and LMO was carried out in a short time using the ternary DES system. The ternary DES system consists of choline chloride (ChCl), glycolic acid (GLY), and ascorbic acid (AA). As a result of the leaching process of cathode powders in the black mass without any pre-enrichment process, Li, Co, Ni, and Mn elements passed into solution with an efficiency of over 95% at 60 °C and within 1 h. Moreover, the kinetics of the leaching process was investigated, and Density Functional Theory (DFT) calculations were used to explain the leaching mechanism.

29 November 2024 in Metals
Verified
Journal Article
Open access
PDF file
EUEmircan Uysal
Emircan Uysal
EKElif Emil Kaya
Elif Emil Kaya
HDHalide Nur Dursun
Halide Nur Dursun
MPMerve Papakci
Merve Papakci
SGSebahattin Gürmen
Sebahattin Gürmen
Bernd FriedrichBernd Friedrich
Bernd Friedrich
SmCo magnets are a common material utilized in advanced technological applications. These magnets contain elevated concentrations of Sm and Co within their structural compositions. Given that both Sm and Co are classified as critical metals, the recycling of these magnets after their operational lifespan is of significant economic and environmental importance. Hydrometallurgical recycling processes represent an effective method for the recycling of these magnets. In this study, a pH-controlled selective precipitation method was developed using two HNO3 solutions with distinct oxidizing properties for the recovery of Sm and Co from end-of-life (EoL) SmCo magnets. In the initial stage of the process, the magnets were leached in a low-oxidizing 2M HNO3 solution, with a 1:30 (w/v) solid-to-liquid ratio at 20 °C. This step was undertaken to ensure the dissolution of Fe, thereby creating an environment conducive to its removal from the solution. The leaching experiments resulted in dissolution efficiencies of 95%, 96%, and 96% for Sm, Co, and Fe, respectively. In the second stage, a leaching experiment was performed using 3M HNO3 with a 1:10 solid-to-liquid ratio at 60 °C. Under these conditions, Sm and Co achieved dissolution efficiencies of 99%, while Fe remained undissolved in the solid phase due to hydrolysis at the high temperature, thus increasing the solution purity. In the precipitation process, the pH of both leachates was initially adjusted to 4 to precipitate impurities such as Fe ions. As a result of precipitation at pH 4 in the 2M HNO3 leachate, Fe ions were almost completely removed. This was followed by selective Sm precipitation in the pH range of 5–6.5 using NH4HCO3. The highest purity of Sm precipitation was achieved when the pH reached 6.5. An increase in Sm precipitation efficiency was observed with increasing pH, with an efficiency of 12.75% at pH 5, which rose to 82.37% at pH 6.5. Furthermore, although the precipitation efficiency of Co increased from 6.25% to 10% within this pH range, no significant difference in the extent of this increase was observed. In the case of the 3M HNO3 leachate, the Sm precipitation efficiency at pH 5 was 44.28%, while at pH 6.5, nearly all of the Sm ions were precipitated. The co-precipitation efficiency at pH 5 was 1.89%, increasing to 36.43% at pH 6.5. This increase in co-precipitation was attributed to the system’s Eh value, which reflects the enhanced oxidizing properties of the 3M HNO3 leach solution. The results of the study indicate that as the oxidizing strength of the solution increased, the co-precipitation rate also increased with rising pH.

22 April 2025 in TURKISH JOURNAL OF CHEMISTRY
Verified
Journal Article
Open access
PDF file
EUEmircan Uysal
Emircan Uysal
HDHalide Nur Dursun
Halide Nur Dursun
EUEmre Can Uysal
Emre Can Uysal
SGSebahattin Gürmen
Sebahattin Gürmen
Chemical compounds in wastewater, including dye molecules, have been identified as significant concerns for environmental integrity and human health. In this study, adsorbent materials were synthesized from biodegradable polymers to remove methylene blue (MB) from wastewater. Calcium alginate hydrogels were produced and coated with chitosan to enhance their pH stability. Furthermore, the calcium alginate gels were doped with silver nanoparticles to improve their photocatalytic properties, promoting MB degradation and enabling gel reuse. The adsorption behavior of the gels was comprehensively examined under dark conditions, considering factors such as time, solid-to-liquid ratio, temperature, and pollutant concentration, all of which significantly impact the adsorption process. The wastewater, containing 100 ppm of MB, was subjected to a cleaning process that resulted in a reduction of the initial concentration by over 95%. Adsorption kinetics, thermodynamic constants, and adsorption isotherms were studied to understand the underlying mechanisms better. It was observed that the adsorption kinetics were compatible with pseudo-second-order with R2 values above 0.99 and the adsorption kinetics were compatible with Freundlich with 0.9996. Modeling and simulation studies were used to establish the correlation between adsorption behavior and the concentration of dye material. Subsequently, UV light exposure was applied, enhancing further efficiency and enabling gel regeneration. Even after five cycles, the gels maintained an efficiency of 88.42%. Structural characterizations, pH stability assessments, and cytotoxicity analyses were conducted to evaluate the suitability of the gels for wastewater treatment with minimal environmental or health impact.

7 October 2024 in Academia Engineering
Verified
Journal Article
Open access
HDHalide Nur Dursun
Halide Nur Dursun
ZÜZeynep Üçerler
Zeynep Üçerler
NDNazlım İlkyaz Dinç
Nazlım İlkyaz Dinç
FBFırat Burat
Fırat Burat
UUUğur Ulusoy
Uğur Ulusoy
Since copper (Cu) plays a vital role in the transition toward carbon neutrality due to its excellent electrical conductivity, environmental and economic advantages can be achieved by utilizing e-waste, which contains much more Cu metal than Cu ores. Therefore, the recovery of Cu from e-waste is crucial for ensuring sustainability and preventing the rapid depletion of natural resources. Due to the significant density difference between metals and plastics, gravity separation methods, such as jigging and shaking tables, can be efficiently applied at large scales. These methods are particularly attractive for e-waste recycling due to their low capital and operating costs. Besides, understanding e-waste materials at the particle-scale level can help improve the separation process by examining the behavior of each particle during separation. However, no literature currently examines particle shapes in the jig separation process for recovering Cu from e-waste. To fill this gap, this study explores the behavior of Cu particles in jig separation from e-waste through shape characterization of Cu particles. The fact that approximately 60% of the Cu in the feed material of the jig-heavy product consists of heavy, large, and round Cu particles shows that not only density and size are effective in stratification.