Emircan Uysal

Mr. Emircan Uysal

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 February 2024 in ACS Omega
Verified
Journal Article
Open access
EKElif Emil Kaya
Elif Emil Kaya
EUEmircan Uysal
Emircan Uysal
DDDilara Nur Dikmetas
Dilara Nur Dikmetas
FKFunda Karbancioglu-Guler
Funda Karbancioglu-Guler
SGSebahattin Gürmen
Sebahattin Gürmen
BFBernd Friedrich
Bernd Friedrich
Nowadays, with the evolution of technology, rare earths are raw materials for a multitude of products, especially in high technological applications. A high amount of REEs is used in the production of permanent magnets, particularly NdFeB. The demand for some of the REEs, including neodymium, praseodymium, and dysprosium, is expected to increase in the coming years. REEs are defined as critical materials due to their high supply risk and economic importance. Recycling secondary raw materials for supplying REEs in the future is one promising option, and one of the best candidates is NdFeB magnets. NdFeB magnets include approximately 30% REEs and 66% of iron. For the near-zero-waste concept, the recovered iron from NdFeB must be evaluated in other applications. In this study, the near-zero-waste valorization concept for EoL-NdFeB magnets is developed, and high-purity REEs are achieved with a two-step process, including leaching and adsorption using alginate beads. Moreover, antimicrobial Fe alginate beads are produced in the leach liquor via adsorption. The antimicrobial activity of the produced Fe alginate beads is evaluated with disc diffusion and broth dilution methods against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. The most effective antibacterial Fe alginate beads are against E. coli and S. aureus with inhibitions of 87.21 and 56.25%, respectively.

3 May 2023 in ACS Omega
Verified
Journal Article
Open access
EUEmircan Uysal
Emircan Uysal
EEElif Emil-Kaya
Elif Emil-Kaya
DYDuygu Yesiltepe-Ozcelik
Duygu Yesiltepe-Ozcelik
SGSebahattin Gürmen
Sebahattin Gürmen

29 November 2024 in Metals
Verified
Journal Article
Open access
PDF file
EUEmircan Uysal
Emircan Uysal
EKElif Emil Kaya
Elif Emil Kaya
HDHalide Nur Dursun
Halide Nur Dursun
MPMerve Papakci
Merve Papakci
SGSebahattin Gürmen
Sebahattin Gürmen
Bernd FriedrichBernd Friedrich
Bernd Friedrich
SmCo magnets are a common material utilized in advanced technological applications. These magnets contain elevated concentrations of Sm and Co within their structural compositions. Given that both Sm and Co are classified as critical metals, the recycling of these magnets after their operational lifespan is of significant economic and environmental importance. Hydrometallurgical recycling processes represent an effective method for the recycling of these magnets. In this study, a pH-controlled selective precipitation method was developed using two HNO3 solutions with distinct oxidizing properties for the recovery of Sm and Co from end-of-life (EoL) SmCo magnets. In the initial stage of the process, the magnets were leached in a low-oxidizing 2M HNO3 solution, with a 1:30 (w/v) solid-to-liquid ratio at 20 °C. This step was undertaken to ensure the dissolution of Fe, thereby creating an environment conducive to its removal from the solution. The leaching experiments resulted in dissolution efficiencies of 95%, 96%, and 96% for Sm, Co, and Fe, respectively. In the second stage, a leaching experiment was performed using 3M HNO3 with a 1:10 solid-to-liquid ratio at 60 °C. Under these conditions, Sm and Co achieved dissolution efficiencies of 99%, while Fe remained undissolved in the solid phase due to hydrolysis at the high temperature, thus increasing the solution purity. In the precipitation process, the pH of both leachates was initially adjusted to 4 to precipitate impurities such as Fe ions. As a result of precipitation at pH 4 in the 2M HNO3 leachate, Fe ions were almost completely removed. This was followed by selective Sm precipitation in the pH range of 5–6.5 using NH4HCO3. The highest purity of Sm precipitation was achieved when the pH reached 6.5. An increase in Sm precipitation efficiency was observed with increasing pH, with an efficiency of 12.75% at pH 5, which rose to 82.37% at pH 6.5. Furthermore, although the precipitation efficiency of Co increased from 6.25% to 10% within this pH range, no significant difference in the extent of this increase was observed. In the case of the 3M HNO3 leachate, the Sm precipitation efficiency at pH 5 was 44.28%, while at pH 6.5, nearly all of the Sm ions were precipitated. The co-precipitation efficiency at pH 5 was 1.89%, increasing to 36.43% at pH 6.5. This increase in co-precipitation was attributed to the system’s Eh value, which reflects the enhanced oxidizing properties of the 3M HNO3 leach solution. The results of the study indicate that as the oxidizing strength of the solution increased, the co-precipitation rate also increased with rising pH.

25 July 2025 in Minerals
Verified
Journal Article
Open access
PDF file
Furkan NazlıFurkan Nazlı
Furkan Nazlı
IHIşıl Hasdemir
Işıl Hasdemir
EUEmircan Uysal
Emircan Uysal
HDHalide Nur Dursun
Halide Nur Dursun
UGUtku Orçun Gezici
Utku Orçun Gezici
SGSebahattin Gürmen
Sebahattin Gürmen
Lithium-ion batteries (LiBs) are utilized in numerous applications due to advancements in technology, and the recovery of end-of-life (EoL) LiBs is imperative for environmental and economic reasons. Pyrometallurgical and hydrometallurgical methods have been used in the recovery of metals such as Li, Co, and Ni in the EoL LiBs. Hydrometallurgical methods, which have been demonstrated to exhibit higher recovery efficiency and reduced energy consumption, have garnered increased attention in recent research. Inorganic acids, including HCl, HNO3, and H2SO4, as well as organic acids such as acetic acid and citric acid, are employed in the hydrometallurgical recovery of these metals. It is imperative to acknowledge the environmental hazards posed by these acids. Consequently, solvometallurgical processes, which involve the use of organic solvents with minimal or no water, are gaining increasing attention as alternative or complementary techniques to conventional hydrometallurgical processes. In the context of solvent systems that have been examined for a range of solvometallurgical methods, deep eutectic solvents (DESs) have garnered particular interest due to their low toxicity, biodegradable nature, tunable properties, and efficient metal recovery potential. In this study, the leaching process of black mass containing graphite, LCO, NMC, and LMO was carried out in a short time using the ternary DES system. The ternary DES system consists of choline chloride (ChCl), glycolic acid (GLY), and ascorbic acid (AA). As a result of the leaching process of cathode powders in the black mass without any pre-enrichment process, Li, Co, Ni, and Mn elements passed into solution with an efficiency of over 95% at 60 °C and within 1 h. Moreover, the kinetics of the leaching process was investigated, and Density Functional Theory (DFT) calculations were used to explain the leaching mechanism.

31 October 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
EUEmircan Uysal
Emircan Uysal
HDHalide Nur Dursun
Halide Nur Dursun
RGRasim Güler
Rasim Güler
UTUğur Takmaz
Uğur Takmaz
AKAyşegül Küt
Ayşegül Küt
SGSebahattin Gürmen
Sebahattin Gürmen
Wastewater is a by-product of numerous industrial processes that have been demonstrated to have adverse effects on human and natural health due to the pollutants it contains. The pollutants in these substances are organic or inorganic molecules and heavy metal ions that significantly harm the environment and human health. A variety of techniques have been devised for the removal of heavy metal ions from wastewater. The adsorption process has attracted significant attention due to its straightforward implementation, cost-effectiveness, and the environmentally friendly production of adsorbent materials using biocompatible substances. In this study, the removal of Cu2+ ions from wastewater was conducted using chitosan pullulan, a biocompatible and biodegradable polymer. In addition to chitosan and pullulan, waste refractory materials from a furnace used in iron and steel production were added to these polymer materials to increase the adsorption capacity. The initial step involved grinding the waste refractory brick material. Subsequently, chitosan was dissolved in acetic acid. After that, the refractory material was suspended in this solution, facilitating the formation of hydrogel beads using a NaOH solution. The obtained hydrogels were coated with pullulan to produce polyelectrolyte gel. Pullulan was oxidized to 6-carboxypullulan by the TEMPO (2,2,6,6-Tetramethylpiperidin-1-yl)oxyl) oxidation method and the negatively charged groups in its structure interacted with the positively charged groups in the chitosan structure to produce a complex gel. The chemical structure, morphological analysis, thermal analysis, and water release analysis of the produced waste refractory brick material added chitosan/oxidized pullulan complex gels were examined. The impact of the 6-carboxypullulan coating on the gels’ properties was elucidated. Furthermore, the adsorption of Cu2⁺ was conducted using solutions containing 100, 500, and 1000 ppm Cu2⁺ ions. It has been observed that the material can clean water with over 98% efficiency, even in solutions that exceed the standards set for wastewater. The material’s efficacy in cleaning solutions with concentrations above the standard for wastewater cleaning is evidence of its high performance. Furthermore, the kinetics and isotherm of the adsorption reaction were examined. The kinetics were determined to be consistent with the Pseudo Second Order (chemical reaction controlled) and aligned with the Langmuir and Freundlich Isotherm (mixed adsorption occurred on homogeneous and heterogeneous surfaces).

23 May 2025 in Journal of Sol-Gel Science and Technology
Verified
Journal Article
Open access
PDF file
Duygu Yeşiltepe ÖzçelikDuygu Yeşiltepe Özçelik
Duygu Yeşiltepe Özçelik
UBUtku Burgun
Utku Burgun
FKFaruk Kaya
Faruk Kaya
EUEmircan Uysal
Emircan Uysal
BDBora Derin
Bora Derin
SGSebahattin Gürmen
Sebahattin Gürmen
CO2 levels in the atmosphere are increasing as a result of human activities such as industrial activities, fossil fuel usage, and deforestation. The CO2 methanation reaction, which converts CO2 into methane, may play a crucial role in addressing this issue. Like most commercial syntheses, the CO2 methanation process requires a catalyst. Spinel catalysts, particularly magnesium aluminate (MgAl2O4), have gained attention for their potential in CO2 methanation. In this study, MgAl2O4 nanoparticles were synthesized using a sol–gel method with a molar ratio of Mg:Al = 1:2, and calcined at temperatures ranging from 700 to 900 °C. The structural properties of the nanoparticles were characterized using differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller analysis, X-ray diffraction, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, and transmission electron microscopy. The results showed that the particles had nearly spherical morphology, with agglomeration occurring at higher temperatures. The surface area decreased with increasing calcination temperature, from 188 m²/g at 700 °C to 94 m²/g at 900 °C. NiCo-MgAl2O4 catalysts were prepared by impregnation and characterized by CO2 temperature-programmed desorption and hydrogen temperature-programmed reduction. Catalytic performance tests revealed that the NiCo-MgAl2O4 catalyst calcined at 800 °C achieved the highest CO2 conversion (~85%) and methane selectivity. Spent catalyst analysis showed that carbon deposition negatively affected catalyst performance over time. This study emphasizes the role of strong basic sites in CO2 activation and methane formation, suggesting future improvements in catalyst stability. Graphical Abstract