Oblique photography 3D models are increasingly used in 3D modeling and visualization, urban planning and design, smart cities, smart mines, and other fields. To ensure that 3D models can be replaced and updated, it is necessary to deal with the model holes and incomplete areas caused by the incorrect matching of feature points in the modeling process. Moreover, in 3D models of the planning and management of certain mining areas or urban areas to be developed, regions can also be delineated for replacements and updates. Due to the unsatisfactory display effect of the manually modeled models used to replace and update, the authenticity of the model texture and the detail characteristics of the model triangle meshes cannot be guaranteed during integration. Therefore, this paper proposes a 3D model triangle mesh integration method for oblique photography data which integrates the real and complete 3D models used for replacement with the incomplete part or the part of the original model that needs to be replaced. The experimental results show that this method can integrate the original terrain model and the replacement model efficiently and quickly, the integrated model has no gap, and the display effect is good, effectively achieving model repair or model update and replacement.
The Hapke two-layer medium model is an efficient way of simulating the spectra of dusty leaves. However, the simulation accuracy is low when the amount of dustfall is small. To solve this problem, we introduced the dust coverage factor and the linear spectral mixing model, to improve the accuracy of the Hapke two-layer medium model. Firstly, based on the assumption of spherical dust particles, the arrangement and accumulation mode of the particles were set, and the coverage factor and accumulation thickness of particles in the leaf area were calculated. Then, the coverage factor was used as an abundance. Endmembers were the spectra of dust-free leaves (measured) and dust-covered leaves (simulated by model), and the final simulated spectra were calculated using linear spectral mixing theory. This study presents the following findings: (1) When the coverage factor was calculated using the exponential model, the maximum difference between the corrected simulated spectra and the measured spectra was 3.4%, and the maximum difference between the original simulated spectra and the measured spectra was 15.2%. The accuracy of the corrected spectra is much higher than that of the original simulated spectra. (2) In this study, the physical thickness and optical thickness calculated by the Hapke two-layer medium model are equivalent, which is quite different from the actual dust accumulation. When the linear spectral mixing model is introduced, to modify the simulation value when the number of dust particles accumulated is less than one layer, the spectral endmember value of the simulated dust leaf is replaced by the simulation spectrum when the number of dust particles accumulated is exactly one layer. The calculated cor-rection spectrum has high rationality and credibility. This finding may be beneficial for monitoring amounts of dustfall accurately using remote sensing in mining areas.