Defu Che

Dr. Defu Che

Key Laboratory of Ministry of Education on Safe Mining of Deep Metal Mines, Northeastern University

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 December 2018 in Sensors
Verified
Journal Article
Open access
PDF file
DCDefu Che
Defu Che
ALAiman Liang
Aiman Liang
XLXuexin Li
Xuexin Li
BMBaodong Ma
Baodong Ma
Iron tailings ponds are engineered dam and dyke systems used to capture iron tailings. They are high-risk hazards with high potential energy. If the tailings dam broke, it would pose a serious threat to the surrounding ecological environment, residents’ lives, and property. Rainfall is one of the most important influencing factors causing the tailings dam break. This paper took Chengde Area, a typical iron-producing area, as the study area, and proposed a remote sensing method to evaluate the safety risk of tailings ponds under rainfall condition by using runoff coefficient and catchment area. Firstly, the vegetation coverage in the study area was estimated using the pixel dichotomy model, and the vegetation type was classified by the support vector machine (SVM) method from Landsat 8 OLI image. Based on DEM, the slope of the study area was extracted, and the catchment area of the tailings pond was plotted. Then, taking slope, vegetation coverage, and vegetation type as three influencing factors, the runoff coefficient was constructed by weight assignment of each factor using analytic hierarchy process (AHP) model in both quantitative and qualitative way. Finally, the safety risk of tailings ponds was assessed according to average runoff coefficient and catchment area in the study area. The results showed that there were 124 low-risk tailings ponds, 16 moderate-risk tailings ponds, and 4 high-risk tailings ponds in the study area. This method could be useful for selecting targeted tailings ponds for focused safety monitoring. Necessary monitoring measurements should be carried out for the high-risk and moderate-risk tailings ponds in rainy season.

23 November 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
Huan ZhangHuan Zhang
Huan Zhang
YYYibin Yao
Yibin Yao
MHMingXian Hu
MingXian Hu
CXChaoqian Xu
Chaoqian Xu
XSXiaoning Su
Xiaoning Su
WPWenjie Peng
Wenjie Peng
Global navigation satellite system (GNSS) signals are affected by refraction when traveling through the troposphere, which result in tropospheric delay. Generally, the tropospheric delay is estimated as an unknown parameter in GNSS data processing. With the increasing demand for GNSS real-time applications, high-precision tropospheric delay augmentation information is vital to speed up the convergence of PPP. In this research, we estimate the zenith tropospheric delay (ZTD) from 2018 to 2019 by static precise point positioning (PPP) using the fixed position mode; GNSS observations were obtained from the National Geomatics Center of China (NGCC). Firstly, ZTD outliers were detected, and data gaps were interpolated using the K-nearest neighbor algorithm (KNN). Secondly, The ZTD differences between the KNN and periodic model were employed as input datasets to train the long short-term memory (LSTM) neural network. Finally, LSTM forecasted ZTD differences and the ZTD periodic signals were combined to recover the final forecasted ZTD results. In addition, the forecasted ZTD results were applied in static PPP as a prior constraint to reduce PPP convergence time. Numerical results show that the average root-mean-square error (RMSE) of predicting ZTD is about 1 cm. The convergence time of the PPP which was corrected by the LSTM-ZTD predictions is reduced by 13.9, 22.6, and 30.7% in the summer, autumn, and winter, respectively, over GPT2-ZTD corrected PPP and unconstrained conventional PPP for different seasons.

20 December 2021 in Remote Sensing
Verified
Journal Article
Open access
PDF file
BMBaodong Ma
Baodong Ma
XYXiangru Yang
Xiangru Yang
YYYajiao Yu
Yajiao Yu
YSYang Shu
Yang Shu
DCDefu Che
Defu Che
Mining can provide necessary mineral resources for humans. However, mining activities may cause damage to the surrounding ecology and environment. Vegetation change analysis is a key tool for evaluating damage to ecology and the environment. Liaoning is one of the major mining provinces in China, with rich mineral resources and long-term, high-intensity mining activities. Taking Liaoning Province as an example, vegetation change in six mining areas was investigated using multisource remote sensing data to evaluate ecological and environmental changes. Based on MODIS NDVI series data from 2000 to 2019, change trends of vegetation were evaluated using linear regression. According to the results, there are large highly degraded vegetation areas in the Anshan, Benxi, and Yingkou mining areas, which indicates that mining activities have seriously damaged the vegetation in these areas. In contrast, there are considerable areas with improved vegetation in the Anshan, Fushun, and Fuxin mining areas, which indicates that ecological reclamation has played a positive role in these areas. Based on Sentinel-2A data, leaf chlorophyll content was inferred by using the vegetation index MERIS Terrestrial Chlorophyll Index (MTCI) after measurement of leaf spectra and chlorophyll content were carried out on the ground to validate the performance of MTCI. According to the results, the leaf chlorophyll content in the mines is generally lower than in adjacent areas in these mining areas with individual differences. In the Yingkou mining area, the chlorophyll content in adjacent areas is close to the magnesite mines, which means the spillover effect of environmental pollution in mines should be considerable. In the Anshan, Benxi, and Diaobingshan mining areas, the environmental stress on adjacent areas is slight. All in all, iron and magnesite open-pit mines should be monitored closely for vegetation destruction and stress due to the high intensity of mining activities and serious pollution. In contrast, the disturbance to vegetation is limited in resource-exhausted open-pit coal mines and underground coal mines. It is suggested that land reclamation should be enhanced to improve the vegetation in active open-pit mining areas, such as the Anshan, Benxi, and Yingkou mining areas. Additionally, environmental protection measures should be enhanced to relieve vegetation stress in the Yingkou mining area.

16 November 2020 in Remote Sensing
Verified
Journal Article
Open access
PDF file
BMBaodong Ma
Baodong Ma
XLXuexin Li
Xuexin Li
ZJZiwei Jiang
Ziwei Jiang
Ruiliang PuRuiliang Pu
Ruiliang Pu
ALAiman Liang
Aiman Liang
DCDefu Che
Defu Che
Dust pollution is severe in some mining areas in China due to rapid industrial development. Dust deposited on the vegetation canopy may change its spectra. However, a relationship between canopy spectra and dust amount has not been quantitatively studied, and a pixel-scale condition for remote sensing application has not been considered yet. In this study, the dust dispersion characteristics in an iron mining area were investigated using the American Meteorological Society (AMS) and the U.S. Environmental Protection Agency (EPA) regulatory model (AERMOD). Further, based on the three-dimensional discrete anisotropic radiative transfer (DART) model, the spectral characteristics of vegetation canopy under the dusty condition were simulated, and the influence of dustfall on vegetation canopy spectra was studied. Finally, the dust effect on vegetation spectra at the canopy scale was extended to a pixel scale, and the response of dust effect on vegetation spectra at the pixel scale was determined under different fractional vegetation covers (FVCs). The experimental results show that the dust pollution along a haul road was more severe and extensive than that in a stope. Taking dust dispersion along the road as an example, the variation of vegetation canopy spectra increased with the height of dust deposited on the vegetation canopy. At the pixel scale, a lower vegetation FVC would weaken the influence of dust on the spectra. The results derived from simulation spectral data were tested using satellite remote sensing images. The tested result indicates that the influence of dust retention on the pixel spectra with different FVCs was consistent with that created with the simulated data. The finding could be beneficial for those making decisions on monitoring vegetation under dusty conditions and reducing dust pollution in mining areas using remote sensing technology.

23 March 2018 in Remote Sensing
Verified
Journal Article
Open access
PDF file
SZShengjun Zhang
Shengjun Zhang
JLJiancheng Li
Jiancheng Li
TJTaoyong Jin
Taoyong Jin
DCDefu Che
Defu Che
The accuracy and resolution of the marine gravity field derived from multisatellite altimeter data sets mainly depend on the corresponding range precision and spatial distribution. Here, we preliminarily investigate the performance of HY-2A altimeter data by analyzing cross-mission sea surface height discrepancies with SARAL/AltiKa and calculating correlation coefficients with respect to tide gauge measurements. We also explore the improved range precision that can be achieved using a two-pass weighted least squares retracker which was proposed for the purpose of optimal gravity field recovery. Firstly, both the exact repetitive mission and the geodetic mission for HY-2A provide new track orientations and different data coverage for recovering the marine gravity field, and these dense geographical distributions are more greatly attributed to the geodetic mission in recent years. Secondly, HY-2A provides reliable sea surface height measurements based on exterior verifications by SARAL/AltiKa geophysical data records and tide gauge measurements, although the accuracy level is slightly lower than SARAL/AltiKa. Another more exciting finding is that the statistics of along-track sea surface heights in one-second intervals show that the two-pass retracking does further improve the range precision by a factor of 1.6 with respect to 20 Hz retracked results in sensor data records. In conclusion, the HY-2A mission can substantially improve the global accuracy and resolution of the marine gravity field and will reveal new tectonic features such as microplates, abyssal hill fabric, and new uncharted seamounts on the ocean floor.

Verified
Journal Article
Open access
PDF file
BMBaodong Ma
Baodong Ma
QLQuan Liu
Quan Liu
ZJZiwei Jiang
Ziwei Jiang
DCDefu Che
Defu Che
QKQiu KeHan
Qiu KeHan
XSXiangxiang Shang
Xiangxiang Shang
Path planning is widely used in many domains, and it is crucial for the advancement of map navigation, autonomous driving, and robot path planning. However, existing path planning methods have certain limitations for complex field scenes with undulating terrain and diverse landcover types. This paper presents an energy-efficient 3D path planning algorithm based on an improved A* algorithm and the particle swarm algorithm in complex field scenes. The evaluation function of the A* algorithm was improved to be suitable for complex field scenes. The slope parameter and friction coefficient were respectively used in the evaluation function to represent different terrain features and landcover types. The selection of expanding nodes in the algorithm depends not only on the minimum distance but also on the minimum consumption cost. Furthermore, the turning radius factor and slope threshold factor of vehicles were added to the definition of impassable points in the improved A* algorithm, so that the accessibility of path planning could be guaranteed by excluding some bends and steep slopes. To meet the requirements for multi-target path planning, the improved A* algorithm was used as the fitness function of the particle swarm algorithm to solve the traveling salesman problem. The experimental results showed that the proposed algorithm is capable of multi-target path planning in complex field scenes. Furthermore, the path planned by this algorithm is more passable and more energy efficient. In this experimental environment model, the average energy-saving efficiency of the path planned by the improved algorithm is 14.7% compared to the traditional A* algorithm. This would be beneficial to the development of ecotourism and geological exploration.