Yao Liu

Ms. Yao Liu

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 July 2023 in Metals
Verified
Journal Article
Open access
PDF file
YLYao Liu
Yao Liu
HPHaokai Peng
Haokai Peng
LWLongjun Wei
Longjun Wei
HPHao Peng
Hao Peng
DMDonglin Ma
Donglin Ma
Yongxiang LengYongxiang Leng
Yongxiang Leng
To investigate the effect of B4C particle size on the microstructure and mechanical properties of B4C/Al composites, and to provide theoretical guidance for the subsequent thermal processing of composites, B4C/Al composites with varying B4C particle sizes (0.2 µm, 0.5 µm, 1 µm, 10 µm) were fabricated using pressureless infiltration. The microstructure of the composites was characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM), while the mechanical properties were analyzed by hardness test, three-point bending and high temperature compression. The results indicated that Al3BC and AlB2 were the primary interfacial reaction products in B4C/Al composites, and interface reaction could be alleviated with increasing particle size. B4C/Al composites with larger B4C particle sizes exhibited a relatively uniform and discrete distribution of B4C, while those with smaller B4C particle sizes showed agglomeration of B4C. The Vickers hardness and peak flow stress of B4C/Al composites gradually decreased with the increase of B4C particle size, while the bending strength, flexural modulus, and fracture toughness tended to increase. In addition, when B4C particle size was 10 µm, the composites displayed optimal comprehensive performance with the lowest peak flow stress (150 MPa) and the highest fracture toughness (12.75 MPa·m1/2).

1 February 2023 in Coatings
Verified
Journal Article
Open access
PDF file
DMDonglin Ma
Donglin Ma
YLYao Liu
Yao Liu
QDQiao yuan Deng
Qiao yuan Deng
LYLi Yantao
Li Yantao
Yongxiang LengYongxiang Leng
Yongxiang Leng
Titanium nitride (TiN) thin films deposited by high-power pulsed magnetron sputtering usually have a high compressive residual stress, which is not conducive for the adherence of TiN thin films. This study investigated the potential of Ti2AlN for releasing the compressive residual stress of HPPMS-deposited TiN thin films and evaluated the adherence strength and hardness of TiN/Ti2AlN multilayers by introducing the Ti2AlN MAX phase to form TiN/Ti2AlN multilayers. The results showed that smooth TiN/Ti2AlN multilayers with the TiN (111) and Ti2AlN (002) textures were successfully synthesized by HPPMS deposition and subsequent vacuum annealing. The compressive residual stress in TiN was released by Ti2AlN. The adherence strength of the TiN/Ti2AlN multilayers was improved after the release of the compressive residual stress, and the hardness of TiN/Ti2AlN multilayers was close to the annealed TiN. This study provides a novel approach for releasing the residual stress of hard ceramic thin films using the MAX phase.

19 August 2025 in Metals
Verified
Journal Article
Open access
PDF file
YLYao Liu
Yao Liu
JXJianle Xie
Jianle Xie
HPHao Peng
Hao Peng
CLChunli Liu
Chunli Liu
DMDonglin Ma
Donglin Ma
Yongxiang LengYongxiang Leng
Yongxiang Leng
Boron (B) is widely used as a neutron-absorbing nuclide and has significant applications in the nuclear industry. B4C/Al composites combine the high hardness of B4C with the ductility of Al, making them commonly used neutron-absorbing materials. Under current preparation methods, the poor wettability and low reactivity of B4C with molten Al limit its effective incorporation into the matrix, and the addition of B4C in B4C/Al composites has reached its threshold limit, making it difficult to achieve breakthrough improvements in neutron absorption performance. However, incorporating additional B elements into the B4C/Al composite can break this limit, effectively enhancing the material’s neutron absorption performance. Nevertheless, research on the impact of this addition on the mechanical properties of the composite remains unclear. The requirements for B4C/Al composites as spent fuel storage and transportation devices include high mechanical strength and certain machinability. This study fabricated B4C/Al composites with varying B contents (5 wt.%, 10 wt.%, and 15 wt.%), and the influence of B addition on the microstructure and mechanical properties of B4C/Al composites was investigated. The results demonstrate that the composites exhibit a density of approximately 99% with well-established interfacial bonds. Increasing B content leads to a higher quantity of interfacial reaction products Al3BC and AlB2, enhancing the Vickers hardness to 370.93 HV. The bending strength and fracture toughness of composites with 5 wt.% and 15 wt.% B addition decreased, whereas those with 10 wt.% B exhibited excellent resistance to crack growth and high-temperature plastic deformation due to a high content of ductile phase.