Chen Xue

Mr. Chen Xue

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 May 2019 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YFYong Feng
Yong Feng
CXChen Xue
Chen Xue
QHQing-Long Han
Qing-Long Han
FHFengling Han
Fengling Han
JDJiacheng Du
Jiacheng Du
This paper investigates the real-time estimation on the State-of-Charge (SoC) and State-of-Health (SoH) of Lithium-ion (Li-ion) batteries for the purpose of achieving reliable, safe and efficient use of batteries. Three terminal sliding-mode observers (TSMOs) are designed; each observer is used to estimate one variable of a LI-ion cell for developing a real-time SoC estimation algorithm. To estimate the SoH, two additional TSMOs are subsequently presented. Finally, a set of complete estimation algorithms for SoC and SoH are formulated. The output injection signals of the proposed TSMOs are designed to be continuous. This can attenuate chattering that exists in the traditional sliding-mode observers (SMOs) and simplify the estimation algorithms. The main advantage of the proposed algorithms is eliminating the low-pass-filter in the estimation algorithms. Therefore, higher estimation accuracy and faster response speed are obtained. The proposed methods are tested and evaluated using the acquired dynamic stress test (DST) and federal urban driving schedule (FUDS) test data, which demonstrate the effectiveness and feasibility.

5 April 2022 in Energies
Verified
Journal Article
Open access
PDF file
MCMengying Chen
Mengying Chen
FHFengling Han
Fengling Han
LSLong Shi
Long Shi
YFYong Feng
Yong Feng
CXChen Xue
Chen Xue
JXJinzheng Xu
Jinzheng Xu
Lithium-ion battery devices are essential for energy storage and supply in distributed energy generation systems. Robust battery management systems (BMSs) must guarantee that batteries work within a safe range and avoid the damage caused by overcharge and overdischarge. The state-of-charge (SoC) of Li-ion batteries is difficult to observe after batteries are manufactured. The hysteresis phenomenon influences the existing battery modeling and SoC estimation accuracy. This research applies a terminal sliding mode observer (TSMO) algorithm based on a hysteresis resistor-capacitor (RC) equivalent circuit model to enable accurate SoC estimation. The proposed method is evaluated using two dynamic battery tests: the dynamic street test (DST) and the federal urban driving schedule (FUDS) test. The simulation results show that the proposed method achieved high estimation accuracy and fast response speed. Additionally, real-time battery information, including battery output voltage and SoC, was acquired and displayed by an automatic monitoring system. The designed system is valuable for all battery application cases.

6 July 2022 in IEEE Access
Verified
Journal Article
Open access
Yanmin WangYanmin Wang
Yanmin Wang
Weiqi ZhangWeiqi Zhang
Weiqi Zhang
CXChen Xue
Chen Xue
In this paper, a novel adaptive continuous sliding mode (SM) control approach is proposed based on the robust stability analysis of buck converters with multi-disturbances. Instead of the traditional first-order SM methods, the twisting algorithm is adopted to realize the control continuity and further weaken their inherent chattering problem. By introducing the zero-crossing detection innovatively, the influence of the traditional twisting algorithm with fixed control gain led to the low precision is effectively eliminated, and the small region can be controlled due to the implementation of the adaptive time-varying control gain. In addition, the magnitude of the controller can be reduced to a minimal admissible level determined by the system stable conditions and the selection of optimization parameters. Furthermore, multiple model uncertainties and external disturbances are considered into the modeling of the buck converters and the proposed adaptive SM controllers to ensure the strong robustness of the whole system while suffering possible disturbances. Finally, comparative simulations and experiments are given to validate the effectiveness of the proposed adaptive control strategy.

15 August 2024 in Batteries
Verified
Journal Article
Open access
PDF file
YFYong Feng
Yong Feng
CXChen Xue
Chen Xue
FHFengling Han
Fengling Han
ZCZhenwei Cao
Zhenwei Cao
Rebecca Jing YangRebecca Jing Yang
Rebecca Jing Yang
This paper proposes a cascade approach based on a sliding mode observer (SMO) for estimating the state of charge (SoC) and state of health (SoH) of lithium-ion (Li-ion) batteries using a single particle model (SPM). After convergence, the observation error signal of the current node in the cascade observer is generated from the output injection signal of the previous node’s observer. The current node’s observer generates its output injection signal, leading to its convergence. This sequential process accurately determines the observed values of each node using only the battery’s current and voltage. Subsequently, the SoC and SoH are estimated using observations of lithium-ion concentrations on the surface and inside the battery anode. The accuracy of this approach is validated using Dynamic Stress Test (DST) and Federal Urban Driving Scheme (FUDS) experimental data. A comparative analysis with conventional SMO and Extended Kalman Filter (EKF) algorithms demonstrates the approach’s effectiveness and superior performance, confirming its practical applicability.

1 July 2018
Verified
Conference Paper
Closed access
YFYong Feng
Yong Feng
CXChen Xue
Chen Xue
XYXinghuo Yu
Xinghuo Yu
FHFengling Han
Fengling Han
This paper proposes a discrete-time sliding mode control approach for applications in discrete-time systems. The reaching phase and quasi-sliding mode are investigated in details, based on which the discrete-time sliding mode control strategies are developed. With the proposed method, the system states move towards the quasi-sliding mode band in finite steps and stay within that band thereafter. The quasi-sliding mode band is designed to be variant, which can increase the reaching speed of the system to the quasi-sliding mode band. The implementation of quasi-sliding motion of the system is proved theoretically. The proposed discrete-time sliding mode control can guarantee the robustness to both the internal parameter variations and the external disturbances. At the same time the controlled systems could achieve faster error convergence and higher steady-state accuracy. The simulation results show the effectiveness of the proposed method.

1 January 2022
Verified
Book Chapter
Closed access
PDF file
CXChen Xue
Chen Xue
YFYong Feng
Yong Feng
FBFan Bai
Fan Bai
TLTianyu Liu
Tianyu Liu