A new optical sensing microplate was developed for rapid screening for the presence of biogenic amines (BAs) in seafood samples with high sensitivity. The deposition of a sensing spot (containing a chameleon dye (Py-1) in a polymeric cocktail) on the bottom of the wells of a standard microplate renders the plate a new sensing tool for a rapid and parallel detection of up to 96 (real) samples. This sensing microplate enables (1) a semi-quantitative readout of analyte concentration by eye-vision, (2) a rapid fluorescence readout of 96 samples with standard instrumentation in less than two minutes (unlike chromatographic and electrophoretic methods), (3) a statistically robust data evaluation (with 8–12 replicates) and (4) a rapid parallel sample preparation with standard 8 or 12-channel micropipettes. On reaction with biogenic amines, the dye shows a significant visible color change from blue over green to red color. The appearance of red color favorably coincides with the concentration of BAs that can induce symptoms of poisoning. The linear ranges of fluorescence calibration data for six biogenic amines cover the clinical toxicological relevant range of BAs that is too low to be detected by the human nose. The LODs range from 0.16 to 0.56 μg mL−1, with correlation coefficients (r2) between 0.985 and 0.999. Finally, the evolution of spoilage of four fish samples (monitored by determination of their BA status) and the increase of their total amine content were found to agree well with previous data on time-dependent evolution of BAs in fish.
22 December 2023 in Journal of Molecular Structure
Poly (methyl methacrylate) (PMMA), is an acrylic polymer substance that is mostly used for denture base applications. The purpose of this laboratory study was to investigate the effect of adding 0.05 wt.% Ag-doped carbon nanotubes (CNT) to PMMA-based (PMMA and MMA) denture base material on the impact strength, microhardness, and antimicrobial activity. A total of 60 heat-cured acrylic resin specimens were prepared. The specimens were randomly divided into two main groups (n = 30/group), according to the powder used: (a) control group, using heat-cured PMMA; (b) treatment group, using a powder prepared by blending 0.05 wt.% silver-doped CNT nanoparticles with heat-cured PMMA. The impact strength, microhardness and anticandidal activity for each group were assessed via the Charpy, Vickers and agar diffusion tests, respectively (n = 10/test for each subgroup). Data were analyzed using independent-sample t-tests (p ≤ 0.05). The results of the impact strength test revealed that the treated heat-cured PMMA-MMA with Ag-doped CNT (2.2 kJ/mm2) was significantly higher than that of the control heat-cured PMMA (1.6 kJ/mm2). Similarly, the Vickers microhardness of the treatment group (52.7 VHN) was significantly higher than that of the control group (19.4 VHN). Regarding the agar diffusion test, after 24 h of incubation, the treated heat-cured PMMA with the Ag-doped CNT exhibited significantly higher anticandidal activity than that of the control group. Therefore, Ag-doped carbon nanotubes could be considered as promising fillers for the dental heat-cured acrylic resin to improve the resistance of the resultant denture against sudden fractures, scratching, and candida invasion.
20 August 2026 in Journal of Stomatology Oral and Maxillofacial Surgery