Zeyu Wu

Dr. Zeyu Wu


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 August 2023 in Electronics
Verified
Journal Article
Open access
PDF file
ZWZeyu Wu
Zeyu Wu
ZCZi Hao Chen
Zi Hao Chen
KWKaixu Wang
Kaixu Wang
This study presents a novel compact design of the Gysel topology and a filtering power divider (FPD) that utilizes a coupling structure. The proposed design replaces the traditional four-quarter wavelength transmission lines of the Gysel power divider with transmission lines and lumped components, resulting in a significantly reduced circuit size. Furthermore, the introduction of this coupling structure ensures the integration of the filtering and power division functions. Two transmission zeros are created near the passband to enhance the frequency selectivity of the responses. Theoretical analysis is carried out, and closed-form equations are derived based on the even–odd-mode method. To validate the theory, a three-port equal Gysel FPD operating at 2 GHz was designed and fabricated. The simulated and measured results demonstrate that this FPD has good power splitting and filtering capability with the size of 0.15 λg × 0.25 λg (λg is the medium wavelength of the central frequency), which is a significant reduction compared to the existing Gysel FPDs. The simulated and measured results are presented to verify the theoretical derivation, demonstrating good features, such as a return loss greater than 15 dB, isolation greater than 15 dB, and an insertion loss of about 4.02 dB (3 + 1.02 dB) in the passband.

30 March 2026 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
KWKaixu Wang
Kaixu Wang
ZDZhitao Du
Zhitao Du
PWPeifeng Wang
Peifeng Wang
ZWZeyu Wu
Zeyu Wu
XRXue Ren
Xue Ren
Qinyu ZhangQinyu Zhang
Qinyu Zhang
This paper proposes a novel simultaneous transmitting and reflecting (STAR) array capable of independently manipulating the transmitted phase, reflected phase, and the transmission-reflection (T-R) power ratio. A reconfigurable metasurface (RMTS) employing a novel controlling scheme is proposed in this paper, which can realize a full range tuning on the transmitted/reflective phases synchronously or a hybrid continuous-discrete control in asynchronous mode. Meanwhile, the T-R ratio of the RMTS can be continuously and arbitrarily tuned from total transmission to total reflection without affecting the phases. The core of the RMTS is a hybrid coupler loaded with two reflective phase shifters with independently controllable phases. Based on this RMTS, a 9×9 STAR array with a center operating frequency of 5.8 GHz is constructed to validate the design. Both simulated and measured results demonstrate that the proposed STAR array achieves ± 45° beam scanning independently on both sides with high aperture efficiency while maintaining arbitrary T-R ratio tuning capability. This design enhances the STAR array’s control capabilities over both phase and power division, making it more favorable in future wireless communication systems.

26 February 2026 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
ZWZeyu Wu
Zeyu Wu
LGLi Gao
Li Gao
KWKaixu Wang
Kaixu Wang
WRWen Rao
Wen Rao
XZXiu Yin Zhang
Xiu Yin Zhang
Qinyu ZhangQinyu Zhang
Qinyu Zhang
This article presents a fully integrated D-band power amplifier (PA) with high output power and high efficiency, utilizing a two-way power combining technique and implemented in 28-nm bulk CMOS. An enhanced slow wave coplanar waveguide (ES-CPW) proposed in this article can achieve a higher phase constant and lower attenuation constant compared to conventional slow wave coplanar waveguides (S-CPWs), enabling simultaneous device miniaturization and performance enhancement. Based on this structure, a power combiner (PC) is designed to reduce the insertion loss while enhancing performance and minimizing the chip area, which achieves a 0.25-dB insertion loss with broadband operation and compact size. The PA measured results show a 3-dB bandwidth of 18.3 GHz from 122.3 to 140.6GHz. In addition, this PA can achieve a peak gain of 18.5dB, 16.2-dBm saturated output power (Psat), and a peak power-added efficiency (PAE) of 16.4% at 130 GHz. This allows the PA to achieve an average output power of 9.1 (6.5) dBm under 64-QAM (256QAM) modulation with a data rate of 45 Gb/s. To the best of the authors’ knowledge, the proposed PA realized the highest PAE, the widest power bandwidth (1-dB bandwidth), and the maximum data rate in CMOS technology and a similar operating band. Meanwhile, the total chip area is $0.32\times 0.31$ mm2.

14 January 2026 in IEEE Microwave and Wireless Technology Letters
Verified
Journal Article
Closed access
WRWen Rao
Wen Rao
LGLi Gao
Li Gao
JJJian Hua Jiang
Jian Hua Jiang
ZWZeyu Wu
Zeyu Wu
XZXiu Yin Zhang
Xiu Yin Zhang
This letter presents a 23–32/31–44 GHz reconfigurable dual-band variable gain amplifier (VGA) for 5G mm-wave transmitters. The design utilizes a constant phase structure with phase-compensation-circuits (PCCs) to minimize phase variation, while a high-impedance-ratio reconfigurable interstage matching network (ITMN) enables dual-band switching. To meet the requirement for high output power in mm-wave transmitters, load-pull is carried out to maximize the output 1 dB compression point (OP ${}_{1\text {dB}}$ ). Fabricated in TSMC 28-nm bulk CMOS process, the proposed VGA achieves a peak ${S} {_{21}}$ of 9.7/9.3 dB at 23–32/31–44 GHz with a gain tuning range of 18/16 dB. It delivers an OP ${}_{1\text {dB}}$ of 4.6/3.7 dBm at its maximum gain states. The rms phase error is below 0.9°/1.9°/0.4°/0.7° across 5G bands n258/n257/n260/n259. The circuit consumes 25.5 mW with a core size of 0.22 mm2. With the aforementioned performance, the proposed VGA is highly competitive for 5G mm-wave mobile communication transmitters.

20 February 2026 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
KWKaixu Wang
Kaixu Wang
YXYihong Xu
Yihong Xu
ZWZeyu Wu
Zeyu Wu
ZCZi Hao Chen
Zi Hao Chen
HWHang Wong
Hang Wong
Qinyu ZhangQinyu Zhang
Qinyu Zhang
This article introduces a novel Magneto-Electric (ME) dipole antenna for wideband On-Antenna Power Combining (OAPC) with enhanced gain. The proposed OAPC antenna design employs two Γ-shaped probes to simultaneously excite the ME dipole with common-mode signals, facilitating power combining directly on the ME dipole. The proposed OAPC ME dipole enables wideband power combining while eliminating power combiners required in conventional on-circuit power combining approaches, achieving both lower insertion loss and more compact integration. The proposed OAPC ME dipole overcomes the bandwidth limitations in previous OAPC works. Furthermore, the mechanism behind the inherent gain degradation of the conventional ME dipole is elucidated. Leveraging the distributed feeding structure of the OAPC design, the High-Frequency (HF) gain degradation of the ME dipole is overcome, resulting in a gain enhancement. The HF enhanced gain effectively compensates for the inherent gain roll-off observed in wideband power amplifiers as the operating frequency increases. The measured results show a 3.5-dB EIRP improvement in the proposed OAPC ME dipole over the single-port design, validating the efficient and near-lossless OAPC capability. Leveraging the HF gain enhancement of the passive OAPC ME dipole, the active implementation achieves a remarkable EIRP improvement up to 9.8 dB.