Li Gao

Li Gao

Auto-generated profile, based on publicly available information

Li Gao

School of Microelectronics, South China University of Technology, Guangzhou, CHINA

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 July 2020 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
LGLi Gao
Li Gao
GRGabriel M. Rebeiz
Gabriel M. Rebeiz
This article presents a 22-44-GHz phased-array receive beamformer in the GlobalFoundries (GF) 45-nm CMOS SOI. The channel includes a wideband single-ended to differential low-noise amplifier (LNA), a 5-bit vector modulator (VM) phase shifter with a measured rms error of <6°, an attenuator, and a variable gain amplifier (VGA) with 16 dB of gain control. The phased-array channel results in a peak gain of 26.3 dB and a 3-dB bandwidth of 20.5-44 GHz. The measured NF is 3-3.6 dB at 22-44 GHz with an IP1dB of -27.5 to -24.5 dBm and dc power consumption of 112 mW. To the best of our knowledge, this is the first wideband phased-array beamformer that covers the entire millimeter-wave 5G band with high linearity and should be suitable for next-generation 5G systems.

17 October 2019 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
LGLi Gao
Li Gao
EWEric Wagner
Eric Wagner
GRGabriel M. Rebeiz
Gabriel M. Rebeiz

12 October 2018 in IEEE Solid-State Circuits Letters
Verified
Journal Article
Closed access
PWPo-Han Peter Wang
Po-Han Peter Wang
HJHaowei Jiang
Haowei Jiang
LGLi Gao
Li Gao
PSPinar Sen
Pinar Sen
YKYoung-Han Kim
Young-Han Kim
DHDrew Hall
Drew Hall
A wake-up receiver (WuRX) that achieves –80.5 dBm sensitivity with only 6.1 nW of power is presented. High sensitivity is achieved via a passive pseudo-balun envelope detector (ED) with a high input impedance (>750 kΩ || <1.4 pF) that enables a 30.6 dB passive voltage gain transformer while providing differential output and improving the conversion gain by 2× compared to a conventional single-ended input passive ED for a given input capacitance. The WuRX is implemented in a 180 nm CMOS process and operates from a 0.4 V supply.

8 June 2020 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
YYYusheng Yin
Yusheng Yin
SZSamet Zihir
Samet Zihir
TKTumay Kanar
Tumay Kanar
QMQian Ma
Qian Ma
HCHyunchul Chung
Hyunchul Chung
GRGabriel M. Rebeiz
Gabriel M. Rebeiz
This article presents a 5G 37-42-GHz 8x8 phased array. The array is based on 2x2 SiGe transmit/receive (TRX) beamformer chips in the SiGe technology with 6 bits of phase control and 8 bits of gain control. A detailed study is presented, showing the effects of array-level amplitude and phase errors on the radiated error vector magnitude (EVM) of 64-element arrays. The array scans to ±60° in the azimuth plane and ±50° in the elevation plane with low sidelobes. The measured peak effective isotropic radiated power (EIRP) is 51 dBm at Psat with a 3-dB bandwidth of 36-41.5 GHz. A 39-GHz communication system is also demonstrated along with a high-pass filter and an integrated upconverter/downconverter and achieves a local oscillator (LO) and image rejection level of 50 dBc, meeting FCC requirements of <-13 dBm/MHz of total leakage power. The array achieves <5% EVM (-26 dB) using a 64-QAM 200-MHz waveform at an average EIRP of 44 dBm over all scan angles, including the LO and upconverter/downconverter contributions. A 30-Gb/s communication link with 64-QAM modulation is also shown. To our knowledge, this is the first demonstration of a 39-GHz phased-array communication system for 5G applications.

4 November 2019 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
HJHaowei Jiang
Haowei Jiang
PWPo-Han Peter Wang
Po-Han Peter Wang
LGLi Gao
Li Gao
CPCorentin Pochet
Corentin Pochet
GRGabriel M. Rebeiz
Gabriel M. Rebeiz
PMPatrick P. Mercier
Patrick P. Mercier
This article presents a miniaturized wake-up receiver (WuRX) that is temperature-compensated yet still consumes only 22.3 nW (7.3 nW excluding the temperature-compensation blocks) while operating at 9 GHz (X-band). By moving the carrier frequency to 9 GHz and designing a high impedance, passive envelope detector (ED), the transformer size is reduced to 0.02 cm² while still achieving 13.5 dB of passive RF voltage gain. To further reduce the area, a global common-mode feedback (CMFB) technique is utilized across the ED and baseband (BB) amplifier that eliminates the need for off-chip ac -coupling components. Multiple temperature-compensation techniques are proposed to maintain constant bandwidth of the signal path and constant clock frequency. The WuRX was implemented in 65- (RF) and 180-nm (BB) CMOS and achieves -69.5- and -64-dBm sensitivity with and without an antenna, respectively. Importantly, the sensitivity is demonstrated to vary by only 3 dB from -10 to 40 °C. This article demonstrates state-of-the-art performance for WuRXs operating at >1 GHz while achieving the smallest area and best temperature insensitivity.

5 June 2020 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
MLMustafa Lokhandwala
Mustafa Lokhandwala
LGLi Gao
Li Gao
GRGabriel M. Rebeiz
Gabriel M. Rebeiz
This article presents a dual-band millimeter-wave front end in 45-nm CMOS silicon-on-insulator (SOI) for 5G applications. The front end is composed of a low-noise amplifier (LNA), power amplifier (PA), and a single-pole double throw (SPDT) switch. A double-tuned PA is used and is based on a two-stage stacked amplifier with a reconfigurable load using SOI switches, so as to achieve an optimal load for both 28 and 39-GHz 5G NR bands. A wideband series-shunt switch is also developed with high power handling (P1dB > 22 dBm) and <; 1-dB insertion loss at 20-40 GHz. In the receive mode, the front end has a measured peak gain of 19.3 dB with a 3-dB bandwidth of 19.7-40 GHz, a noise figure (NF) <; 4 dB at 18-40 GHz, and an IP1dB of 19 to 16 dBm. In the transmit mode and for low-band operation, the peak gain is 17.6 dB with a 3-dB bandwidth of 22.7-30.8 GHz. The Psat is >18.8 dBm and the peak PAE is 18% at 24-30 GHz and includes the switch loss and compression. For high-band operation, the gain at 36-40 GHz is 13.6 ± 1.5 dB with Psat > 18 dBm. To the best of our knowledge, this is the first front end that covers both the 24-28 and 37-40-GHz 5G bands with high output power and low-NF. Application areas are in multistandard base stations and small cells.