To predict the probability of roadside accidents for curved sections on highways, we chose eight risk factors that may contribute to the probability of roadside accidents to conduct simulation tests and collected a total of 12,800 data obtained from the PC-crash software. The chi-squared automatic interaction detection (CHAID) decision tree technique was employed to identify significant risk factors and explore the influence of different combinations of significant risk factors on roadside accidents according to the generated decision rules, so as to propose specific improved countermeasures as the reference for the revision of the Design Specification for Highway Alignment (JTG D20-2017) of China. Considering the effects of related interactions among different risk factors on roadside accidents, path analysis was applied to investigate the importance of the significant risk factors. The results showed that the significant risk factors were in decreasing order of importance, vehicle speed, horizontal curve radius, vehicle type, adhesion coefficient, hard shoulder width, and longitudinal slope. The first five important factors were chosen as predictors of the probability of roadside accidents in the Bayesian network analysis to establish the probability prediction model of roadside accidents. Eventually, the thresholds of the various factors for roadside accident blackspot identification were given according to probabilistic prediction results.
International crash data indicate that roadside characteristics contribute to more than half of all roadside accidents involving serious injury or death. Therefore, research on roadside safety is urgently needed. Based on the vehicle departure speed, pavement height (i.e., the difference between pavement elevation and ground elevation), slope gradient, and horizontal curve radius, this study uses PC-Crash simulation software to carry out tests of trucks and cars exiting a road. A chi-squared automatic interaction detection (CHAID) decision tree is used to explore the causative mechanism of vehicle rollover, and the concept of a “safe slope” to ensure that vehicles do not roll over is proposed. Aiming at straight and curved sections, discriminant functions of vehicle rollover and nonrollover are fitted through Bayesian discriminant analysis, and safe slope calculation models for trucks and cars are then constructed. Based on the obtained safe slope models, calculation methods for the safe slope and the roadside clear zone width involving different traffic compositions are proposed by calibrating the lateral distance from the final position of nonrollover vehicles to the road edge. The results show that the factors affecting vehicle rollover are, in descending order of importance, the slope gradient, pavement height, vehicle type, departure speed, and horizontal curve radius. For a section with a large proportion of cars, the slope gradient should not be steeper than 1:3.5. The horizontal curve radius should not be less than 600 m for a section with a large proportion of trucks and a slope gradient steeper than 1:3.5 or shallower than 1:2.5. Additionally, for a section with a pavement higher than 0.5 m and a slope gradient steeper than 1:2.5, the operating speed limit should be lower than 60 km/h. These research results have theoretical value and practical significance to improve the driving safety level and reducing the risk of roadside accidents.
The larger the proportion of truck traffic volume, the greater the impact on traffic efficiency, and overtaking behavior will also have an impact. Therefore, in order to clarify the truck traffic volume of the freight two-lane highway due to the difficulty of overtaking, an actual vehicle test is carried out. This involves selecting the appropriate two-lane test section, recording each moment and speed in the driver’s overtaking behavior, performing multiple regression analysis to examine the relationship between the overtaking conflict time and design speed and traffic volume, determining a reasonable evaluation series of two-lane road overtaking risk and the corresponding overtaking conflict time threshold by the Fisher optimal segmentation method, and giving an overtaking behavior risk evaluation method based on conflict time. Finally, according to the overtaking conflict time model, different truck traffic conditions are obtained. The research results show that overtaking conflict time is negatively correlated with the traffic volume and design speed of the lane. Through the risk assessment of the corresponding overtaking behavior, the three levels of serious conflict, general conflict and non-conflict are determined, and the freight traffic volume corresponding to different conflict levels at different speeds is calculated, which provides a reference for setting auxiliary lanes for the two-lane freight highway.