Penguins are adapted to underwater life and have excellent swimming abilities. Although previous motion analyses revealed their basic swimming characteristics, the details of the 3D wing kinematics, wing deformation and thrust generation mechanism of penguins are still largely unknown. In this study, we recorded the forward and horizontal swimming of gentoo penguins (Pygoscelis papua) at an aquarium with multiple underwater action cameras and then performed a 3D motion analysis. We also conducted a series of water tunnel experiments with a 3D printed rigid wing to obtain lift and drag coefficients in the gliding configuration. Using these coefficients, the thrust force during flapping was calculated in a quasi-steady manner, where the following two wing models were considered: (1) an ‘original’ wing model reconstructed from 3D motion analysis including bending deformation and (2) a ‘flat’ wing model obtained by flattening the original wing model. The resultant body trajectory showed that the penguin accelerated forward during both upstroke and downstroke. The motion analysis of the two wing models revealed that considerable bending occurred in the original wing, which reduced its angle of attack during the upstroke in particular. Consequently, the calculated stroke-averaged thrust was larger for the original wing than for the flat wing during the upstroke. In addition, the propulsive efficiency for the original wing was estimated to be 1.8 times higher than that for the flat wing. Our results unveil a detailed mechanism of lift-based propulsion in penguins and underscore the importance of wing bending.
2 August 2018 in IEEE Robotics and Automation Letters
To enhance the motion performance of all-terrain robots, an eccentric paddle mechanism (ePaddle) based on planet gear mechanism was designed. This letter is on the design, control scheme, and implementation of a wheel-paddle integrated quadruped robot based on the ePaddle mechanism. To ensure the reliability and ruggedness in harsh environment, protection measures were added to both electrical system and crucial mechanical parts. To negotiate rough terrain effectively, hybrid mode was introduced, which is more efficient comparing with other legged modes and easier to transit among three supporting gestures according to the variation of terrain situation. Each joint has been measured to follow accurate trajectories of position. Indoor and outdoor tests were conducted with the described hybrid mode, which verified the whole design and the negotiability in rough terrain.
This review synthesizes current research on hydrofoil-propelled robots inspired by the swimming mechanisms of sea turtles and penguins. It begins by summarizing the swimming kinematics of these organisms, highlighting their superior aquatic performance as the primary motivation for biomimetic design. Next, established analytical methods for characterizing hydrofoil locomotion patterns are presented, along with a clear delineation of the decoupled motion components exhibited by sea turtle flippers and penguin wings. Such decoupling provides a systematic framework for guiding the design of driving mechanisms. Building on this biomechanical foundation, the review critically examines recent advances in biomimetic flexible hydrofoils that enhance propulsion efficiency through three synergistic mechanisms to enhance thrust generation, while identifying key challenges in material durability and non-linear fluid–structure interactions. The review then surveys existing hydrofoil actuation systems, which commonly reproduce coupled motions with multiple degrees of freedom (DOFs). Finally, representative biomimetic robots are examined: sea turtle-inspired forelimbs typically incorporate three DOFs, whereas penguin-inspired wings usually offer two DOFs. By aligning robotic designs with the decoupled motion patterns of the source organisms, this review offers critical insights to advance the development of hydrofoil propulsion systems for enhanced aquatic performance.
This paper presents a bionic dual-fin underwater robot, inspired by the ocean sunfish, that achieves multiple swimming motions using only two vertically arranged fins. This work demonstrates that a mechanically simple platform can execute complex 2-D and 3-D motions through advanced control strategies, eliminating the need for auxiliary actuators. We control the two fins independently so that they can perform cooperative actions in the water, enabling the robot to perform various motions, including high-speed cruising, agile turning, controlled descents, proactive ascents, and continuous spiraling. The swimming performance of the dual-fin robot in executing multi-modal locomotion is experimentally analyzed through visual measurement methods and onboard sensors. Experimental results demonstrate that a minimalist dual-fin propulsion system of the designed ocean sunfish robot can provide speed (maximum cruising speed of 1.16 BL/s), stability (yaw amplitude less than 4.2°), and full three-dimensional maneuverability (minimum turning radius of 0.89 BL). This design, characterized by its simple structure, multiple motion capabilities, and excellent motion performance, offers a promising pathway for developing robust and versatile robots for diverse underwater applications.
Penguins have evolved excellent swimming skills as diving birds, benefiting from their agile wings. This paper experimentally analyzes the effects of the wing sweepback angle on thrust generation using a robotic penguin wing. A developed wing mechanism that can realize penguin-like flapping and feathering motion was used for actuating five alternative wing models, with different sweepback angles ranging from 0° to 50°. Force measurements under a steady water flow were conducted for both fixed and flapping states for all wing models. The results showed that small sweepback angles of 30° or less in the fixed state caused a steep lift curve and a moderate sweepback angle of 30° produced the largest lift-to-drag ratio. In the flapping state, the smaller sweepback wings generated a larger net thrust for the same wing motion, whereas the larger-sweepback wings produced more thrust under the same Strouhal number. The findings also revealed that larger sweepback wings more easily achieve the maximum net thrust in terms of less angle-of-attack control. In contrast, the hydrodynamic efficiency was not greatly affected by the sweepback. Regardless of the sweepback, the trend of the efficiency increasing with increasing flow speed indicates that the penguin wings can be more suitable for high-speed locomotion for higher hydrodynamic efficiency.
30 April 2025 in Journal of The Royal Society Interface
Alcids showcase excellent aerial–aquatic locomotion abilities benefitting from the morphing wing. In the aerial environment, alcids fully extend their wings, while underwater, they partly fold the wings. In this article, we mimicked the wing morphology of the alcids family to explore the hydrodynamic advantage of the folded configuration in the aquatic environment and four three-dimensional-printed wings including any combination of with feather or without feather, and extended or folded were created. The steady-state experiment reveals that the extended wings of alcids double the lift, counteracting gravity, while folding the wings halves the drag and reduces unnecessary lift, with configurations maintaining a similar lift-to-drag ratio. We investigated the alcid wing kinematics and designed an electronic wing mechanism with flapping and pitching motions to mimic the wing motion of the alcid. Quasi-steady estimation confirmed the presence of an active upstroke during diving in alcids. The experimental results validate the estimation, showing good agreement in force trends and average forward force. Additionally, the flapping wing experiment also demonstrates that pitch motion improves thrust generation, reduces lateral vibrations and increases mechanical efficiency. Under identical kinematics, extended models performed best, but alcids may prefer folded wings underwater for their highest thrust at the same Strouhal number and lower power needs.