The study of thermal behaviors of concrete structures has been an area of great interest to researchers over a long period of time. This paper presents the details of analytical studies, which were carried out in order to investigate high temperature performance of steel or carbon fiber reinforced polymer (CFRP) bar reinforced concrete (RC) beams. This performance is considered to be highly dependent on elevated temperature properties of employed materials (i.e., concrete, steel, and FRP), concrete cracking model, and temperature related strain components. The effects of these parameters in relation to the experimental data were studied in order to establish those that are critical for the prediction of fire resistance of steel or FRP RC beams. Constitutive models for temperature dependent thermal expansion coefficient of concrete and steel have been proposed and validated against the recorded beam behaviors. The effects of transient creep strain were found insignificant in the studies presented in this paper. Non-orthogonal and orthogonal crack formations were found to be suitable for steel and CFRP reinforced beams, respectively. A highly non-linear rebar stress distribution was observed at the mid-span of the beam. Compressive stresses were produced in the steel bars, owing to their restrained thermal dilatation during heating.
The term “travelling fire” is used to label fires which burn locally and move across the floor over a period of time in large compartments. Through experimental and numerical campaigns and while observing the tragic travelling fire events, it became clear that such fires imply a transient heating of the surrounding structure. The necessity to better characterize the thermal impact generated on the structure by a travelling fire motivated the development of an analytical model allowing to capture, in a simple manner, the multidimensional transient heating of a structure considering the effect of the ventilation. This paper first presents the basic assumptions of a new analytical model which is based on the virtual solid flame concept; a comparison of the steel temperatures measured during a travelling fire test in a steel-framed building with the ones obtained analytically is then presented. The limitations inherent to the analyticity of the model are also discussed. This paper suggests that the developed analytical model can allow for both an acceptable representation of the travelling fire in terms of fire spread and steel temperatures while not being computationally demanding, making it potentially desirable for pre-design.
In this paper, we present the development of a novel processing technology to tackle hard-to-recycle plastic packaging waste contaminated with food residues. The proof-of-concept (POC) technology can effectively separate food residual amounts from plastic waste materials to a level acceptable for further re-use or recycling of the plastic packaging. To assess this technology, we have conducted spectroscopic, thermal, and calorimetric characterizations of the obtained fractions, such as cleaned mixed plastics (CMP), food waste with mixed plastics (FWMP), and a mixture of microplastics (MP). The analyses were carried out with the aid of Fourier-Transform Infrared spectroscopy (FT-IR), Thermo-Gravimetric Analysis (TGA), Microcone Combustion Calorimetry (MCC), and ‘bomb’ calorimetry. The highest ratio of CMP to FWMP and the lowest amount of MP were obtained utilizing 700 rpm blade rotational speed and 15 s residence time of contaminated plastics in a cutting mill chamber. The plastics were freed from food contamination by 93–97%, which highlights a strong potential of the POC as a solution for ‘dry-cleaning’ of similar wastes on a larger scale. The main components of the CMP fraction were low-density polyethylene (LDPE), polypropylene (PP), and polyethylene terephthalate (PET), which are recyclable plastics. The knowledge and understanding of thermal degradation behaviours and calorimetric attributes of separated fractions, determined in this study, are essential in informing the industrial players using pyrolysis as a technique for recycling plastics.
Researchers and designers starting investigations and work involving high-strength concrete, may face difficulties in producing high-performance concrete, including mix design and other practical issues. This question is still vital and significant in many countries in the world where the high-strength concrete industry is still developing. The hurdle of poor approaches (available in the literature) tackling this issue has encountered the authors of this paper when a major project on performance of high-strength concrete columns in fire was started at the University of Ulster. This paper is constructed in an easy way to simplify the method of producing high-strength concrete. The present paper includes the results of 15 trial mixes, where issues such as using silica fume and superplasticizer are discussed. This paper addresses new-to-the-field researchers and designers (worldwide) beginning studies and work involving high-strength concrete.
13 May 2022 in Journal of Structural Fire Engineering
Purpose: In the frame of the European RFCS TRAFIR project, three large compartment fire tests involving steel structure were conducted by Ulster University, aiming at understanding in which conditions a travelling fire develops, as well as how it behaves and impacts the surrounding structure.Design/methodology/approach: During the experimental programme, the path and geometry of the travelling fire was studied and temperatures, heat fluxes and spread rates were measured. Influence of the travelling fire on the structural elements was also monitored during the travelling fire tests.Findings: This paper provides details related to the influence of travelling fires on a central structural steel column.Originality/value: The experimental data are presented in terms of the gas temperatures recorded in the test compartment near the column, as well as the temperatures recorded in the steel column at different levels. Because of the large data, only fire test one results are discussed in this paper.