The channel model is by far the most computing intensive part of the link level simulations of multiple-input and multiple-output (MIMO) fifth-generation new radio (5G NR) communication systems. Simulation effort further increases when using more realistic geometry-based channel models, such as the three-dimensional spatial channel model (3D-SCM). Channel emulation is used for functional and performance verification of such models in the network planning phase. These models use multiple finite impulse response (FIR) filters and have a very high degree of parallelism which can be exploited for accelerated execution on Field Programmable Gate Array (FPGA) and Graphics Processing Unit (GPU) platforms. This paper proposes an efficient re-configurable implementation of the 3rd generation partnership project (3GPP) 3D-SCM on FPGAs using a design flow based on high-level synthesis (HLS). It studies the effect of various HLS optimization techniques on the total latency and hardware resource utilization on Xilinx Alveo U280 and Intel Arria 10GX 1150 high-performance FPGAs, using in both cases the commercial HLS tools of the producer. The channel model accuracy is preserved using double precision floating point arithmetic. This work analyzes in detail the effort to target the FPGA platforms using HLS tools, both in terms of common parallelization effort (shared by both FPGAs), and in terms of platform-specific effort, different for Xilinx and Intel FPGAs. Compared to the baseline general-purpose central processing unit (CPU) implementation, the achieved speedups are 65X and 95X using the Xilinx UltraScale+ and Intel Arria FPGA platform respectively, when using a Double Data Rate (DDR) memory interface. The FPGA-based designs also achieved ~3X better performance compared to a similar technology node NVIDIA GeForce GTX 1070 GPU, while consuming ~4X less energy. The FPGA implementation speedup improves up to 173X over the CPU baseline when using the Xilinx UltraRAM (URAM) and High-Bandwidth Memory (HBM) resources, also achieving 6X lower latency and 12X lower energy consumption than the GPU implementation.

Notably, developing an innovative architectural network paradigm is essential to address the technical challenging of 5G applications' requirements in a unified platform. Forthcoming applications will provide a wide range of networking, computing and storage capabilities closer to the end-users. In this context, the 5G-PPP Phase two project named “5G-CORAL: A 5G Convergent Virtualized Radio Access Network Living at the Edge” aims at identifying and experimentally validating which are the key technology innovations allowing for the development of a convergent 5G multi-RAT access based on a virtualized Edge and Fog architecture being scalable, flexible and interoperable with other domains including transport, core network and distant Clouds. In 5G-CORAL, an architecture is proposed based on ETSI MEC and ETSI NFV frameworks in a unified platform. Then, a set of exemplary use cases benefiting from Edge and Fog networks in near proximity of the end-user are proposed for demonstration on top of connected car, shopping mall and high-speed train platforms.

The simulation of massive multiple-input multiple-output (MIMO) channel models is becoming increasingly important for testing and validation of fifth-generation new radio (5G NR) wireless networks and beyond. However, simulation performance tends to be limited when modeling a large number of antenna elements combined with a complex and realistic representation of propagation conditions. In this paper, we propose an efficient implementation of a 3rd Generation Partnership Project (3GPP) three-dimensional (3D) channel model, specifically designed for graphics processing unit (GPU) platforms, with the goal of minimizing the computational time required for channel simulation. The channel model is highly parameterized to encompass a wide range of configurations required for real-world optimized 5G NR network deployments. We use several compute unified device architecture (CUDA)-based optimization techniques to exploit the parallelism and memory hierarchy of the GPU. Experimental data show that the developed system achieves an overall speedup of about 240× compared to the original C++ model executed on an Intel processor. Compared to a design previously accelerated on a datacenter-class field programmable gate array (FPGA), the GPU design has a 33.3% higher single-precision performance but a 7.5% higher power consumption. The proposed GPU accelerator can provide fast and accurate channel simulations for 5G NR network planning and optimization.