Novel, non-toxic antifouling technologies are focused on the manipulation of surface topography to deter settlement of the dispersal stages of fouling organisms. This study investigated the effect of the aspect ratio (feature height/feature width) of topographical features engineered in polydimethylsiloxane, on the settlement of cyprids of Balanus amphitrite and zoospores of Ulva linza. The correlation of relative aspect ratios to antifouling efficacy was proven to be significant. An increase in aspect ratio resulted in an increase of fouling deterrence for both zoospores and cyprids. The spore density of Ulva was reduced 42% with each unit increase in aspect ratio of the Ulva-specific Sharklet AF™ topography. Similarly, the number of settled cyprids was reduced 45% with each unit increase in aspect ratio. The newly described barnacle-specific Sharklet AF™ topography (40 μm feature height, aspect ratio of 2) reduced cyprid settled by 97%. Techniques have been developed to superimpose the smaller Ulva-specific topographies onto the barnacle-specific surfaces into a hierarchical structure to repel both organisms simultaneously. The results for spore settlement on first-generation hierarchical surfaces provide insight for the efficacious design of such structures when targeting multiple settling species.

Over the last decade, approaches to the development of surfaces that perturb settlement and/or adhesion by barnacles have diversified substantially. Although, previously, coatings research focussed almost exclusively on biocidal technologies and low modulus, low surface-free-energy ‘fouling-release’ materials, novel strategies to control surface colonisation are now receiving significant attention. It is timely, therefore, to review the current ‘state of knowledge’ regarding fouling-resistant surface characteristics and their mechanisms of action against settling larvae of barnacles. The role of the barnacle in marine fouling is discussed here in the context of its life cycle and the behavioural ecology of its cypris larva. The temporary and permanent adhesion mechanisms of cyprids are covered in detail and an overview of adult barnacle adhesion is presented. Recent legislation has directed academic research firmly towards environmentally inert marine coatings, so the actions of traditional biocides on barnacles are not described here. Instead, the discussion is restricted to those surface modifications that interfere with settlement-site selection and adhesion of barnacle cypris larvae; specifically, textural engineering of surfaces, development of inert ‘non-fouling’ surfaces and the use of enzymes in antifouling.

Globally, ascidians are a significant contributor to benthic marine fouling communities, but have remained poorly studied in this context. In some cases, such as in shellfish and finfish aquaculture, ascidians are the most problematic of all fouling organisms. The disproportionate impact of ascidian fouling in some specific geographic locations has been related directly to anthropogenic translocation of these organisms around the globe. In the case of ascidians, therefore, the economic issue of biofouling and the ecological ramifications of invasion are inextricably linked. This mini-review briefly discusses the introduction of non-native ascidians to areas where they have subsequently proven to be a significant fouling pest. The elements of ascidian reproductive ecology that support their aggressive fouling character are discussed and the scant information pertaining to their adhesion and adhesives is presented. Finally, strategies for mitigating ascidian fouling are examined. It is suggested that sufficient working knowledge currently exists to support the inclusion of one or more common ascidian species as ‘standard’ test organisms used for evaluation of novel fouling-resistant surfaces.

This manuscript constitutes the first evidence of the effects of texture on the rate of removal of cyprids from surfaces and the link between settlement preferences and susceptibility to removal by force. Cyprids of Balanus amphitrite settled preferentially on sinusoidal linear textures (1:1 aspect ratio) in the range 0–32 μm, with textures on the scale of the cyprid (512 μm) treated as flat. Polycarbonate was preferred as a substratum to a polydimethylsiloxane (PDMS) elastomer. Textures of 64–256 μm were avoided and the texture of 256 μm in PDMS was the least preferred substratum tested, with no settlement of cyprids. Hydrodynamic removal was inversely correlated to settlement rate on the textures assayed, implying an adaptive response by cyprids to select surface textures to which their attachment was most tenacious. Correlation plots suggest that likelihood of removal by force is not the only factor involved when cyprids elect to settle on a given texture. Choice and no-choice assays delivered different results. This discrepancy is partially ascribed to inherent variability in the choice assay method, but also to the ability of cyprids to compare textures and exercise true choice, biasing settlement towards stimulatory textures in preference to intermediate textures that were settled on in the absence of choice. The identification of a link between settlement preference and likelihood of removal will assist practically in the development of fouling-resistant marine coatings.