Marco Noack

Mr. Marco Noack


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

Verified
Journal Article
Open access
PDF file
MNMarco Noack
Marco Noack
KRKris Rudolph
Kris Rudolph
RBRichard Breimann
Richard Breimann
EKEckhard Kirchner
Eckhard Kirchner
This paper focuses on the electrochemical joining of additively manufactured components using simulation-based and experimental methods. The study investigates the influence of cover screens on the filling behavior of the joining zone. Experimental methods involving additive manufacturing and electroplating are combined with simulation models to provide a realistic representation of the joining process. The results show a good agreement between the simulated and experimental findings, indicating the applicability of the simulation model. The parameter study reveals that higher cover factors result in a decrease in the excess material ratio, indicating reduced material deposition outside the joining zone. The filling time required to completely fill the joining zone is influenced by both the cover size and the opening angle of the joining zone. The optimal parameter combinations depend on whether the filling time or the excess material volume is to be minimized. Cavity formation within the joining zone was identified as a critical factor affecting the completeness of the filling. The study provides insights into the influence of cover screens on the electrochemical joining process and offers guidance for optimizing the design of the joining zone.

25 August 2025 in Progress in Additive Manufacturing
Verified
Journal Article
Open access
PDF file
MNMarco Noack
Marco Noack
CGChristian Gutzler
Christian Gutzler
EKEckhard Kirchner
Eckhard Kirchner
Additive manufacturing (AM) of metallic lattice structures enables lightweight, high-performance components for structural and multifunctional applications. However, direct metal AM processes are costly and resource-intensive. This study investigates a hybrid approach that combines the geometric flexibility of polymer AM with the mechanical performance of electroplated metals. Polymer lattice templates with fine features were fabricated via stereolithography and subsequently coated with thick copper layers through a 48-h electroplating process. The resulting hybrid structures achieved a copper mass fraction exceeding 98% and exhibited a relative density of 18.9%, comparable to fully metallic lattice materials. Mechanical testing under uniaxial compression revealed substantial improvements in structural performance: while absolute stiffness and strength increased by up to 500 times compared to the uncoated polymer lattice, the relative density also increased significantly. To account for this, the relative effective modulus, defined as the ratio of relative modulus to relative density, was evaluated, demonstrating a 30-fold improvement through metallization. Failure analysis revealed stretch-dominated deformation and brittle collapse modes, closely resembling those observed in hollow metallic lattices. These results highlight the potential of thick-film electroplating as a scalable and versatile route to fabricate mechanically efficient, predominantly metallic lattice structures. This approach paves the way for multifunctional applications in lightweight and energy-absorbing systems.


6 January 2026 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
MNMarco Noack
Marco Noack
RMRobert Maier
Robert Maier
EKEckhard Kirchner
Eckhard Kirchner
Metal electrodeposition on additively manufactured lattice structures enables the creation of functionally graded hybrid components with enhanced mechanical properties. However, predicting coating thickness distribution remains challenging due to complex current density fields in intricate geometries. This study develops and validates a finite element electrochemical simulation model for predicting coating thickness distribution in lattice structures using COMSOL Multiphysics 6.1. The model incorporates Butler–Volmer electrode kinetics, mass transport limitations, and the Laplace equation for current distribution. Experimental validation was performed using FCCZ lattice structures electrochemically coated with nickel for 24 h at 200 A/m2. CT scanning analysis revealed mean absolute errors of 5.25% between simulation and experiment after model calibration. The validated model successfully captures the exponential coating gradient from exposed edges to internal regions and provides a robust predictive tool for coating thickness distribution, which is essential for the effective design and optimization of electrochemically metallized lattice structures.