Climate change and the growing consumption of natural resources has made it increasingly clear that engineering must focus on the development of more sustainable products. To do so, the methodologies for developing products need to address sustainability. However, many of the frequently used methodologies, such as Modular Function Deployment (MFD) or the Life Phases Modularisation (LPM), do not do that sufficiently. The product life phases, these methodologies are based, only address sustainability in the form of recycling. That is why a broader approach to sustainability, such as the R-imperatives, is not considered. Therefore, in this contribution, the model of product life phases is extended by integrating the R-imperatives. Furthermore, the module drivers resulting from the extended product life phases that are necessary to apply the MFD and the LPM are developed. Finally, the positive impact of the developed module drivers on the product architecture is shown by applying the resulting method onto an industrial example.
Standardized fasteners such as bolts are particularly suitable for structurally integrated force measurements, as they are located directly in the force flow and therefore allow the monitoring of the overall system status in-situ via the multi-axis components of the acting forces. Available solutions are either tailored to specific applications or focus solely on measuring individual components such as the axial force. We present a sensor integrated bolt that is capable of measuring axial force and bending torques. Two cavities are designed within the bolt for the measurement and full integration of electronics, allowing for full encapsulation and autonomy of the sensor. Adjustments to the bolt, such as the cavity design, are optimized using a finite element analysis to minimize any weakening of its primary function. Losses in resilience correspond to the reduction of a strength class. The sensor incorporates three bending beams equipped with strain gauges benchmarked through a calibration setup, that demonstrates a low uncertainty of only 2.5% and the capability to decouple axial and bending loads from the sensor’s output signals. The sensor is integrated into a prototype M20 bolt by means of screwing and bonding connection. Measurements confirm a linear force transmission to the sensor with a linearity error of 1.0% for axial loading and a hysteresis error of 1.9 %. Experimental validation confirms the bolt’s capability to detect bending moments under axial pretension, thus allowing for capturing all acting forces on such bolted connections.
This contribution explores the development of a digital twin for industrial valves, with a focus on mitigating the costly consequences of valve malfunctions in large-scale industrial environments. Industrial valves are critical components in fluid and gas control systems where unexpected failures can lead to significant downtime and financial loss. Digital twins as virtual replicas of physical systems offer a promising solution as they enable real-time monitoring and predictive maintenance. This paper looks at the creation of a digital twin for a specific valve type (74BS from SchuF Armaturen und Apparatebau GmbH) and considers key aspects such as model development, sensor integration and IT infrastructure. A test bench is constructed to collect the measured values to support the validation of the digital twin. The integration of sensors and the development of an IT system for data processing are also described in detail. Finally, the technically relevant frequencies are identified in an FFT.
The potentials opening up by cyber-physical systems in the form of sensor-integrating machine elements (SiME) allowing for in-situ measurements result in more complex systems with a multitude of different microelectronic components, nevertheless providing the database usable for digitalization of in-situ processes as well as allowing the Internet of Things implementation for processes. Increasing system complexity again results in a more complex system design and configuration process, taking into account the properties of each sub-system. Obtaining a framework for selecting the individual components for creating a SiME therefore is crucial for simplifying the design process. Thereby, this paper presents a first step towards such a framework, by identifying parameter sets which can be used for selecting the microelectronic components to be used in the machine element in design, where the parameters are seen as characteristics of the individual components, limiting the number of usable components and therefore allowing the design and configuration process. The method used in this paper is based on use case specific as well as general parameter analysis, which is designed to be applied to a multitude of use cases for different machine elements. Being applied to the use case of a fastening bolt, two parameter sets, firstly for creating a component database and secondly selecting components to be used, are derived, demonstrating the applicability of the suggested methods. Finally, the parameter sets are validated by an exemplary component selection process, highlighting the potential of the concept as well as showing room for further research.
This paper focuses on the electrochemical joining of additively manufactured components using simulation-based and experimental methods. The study investigates the influence of cover screens on the filling behavior of the joining zone. Experimental methods involving additive manufacturing and electroplating are combined with simulation models to provide a realistic representation of the joining process. The results show a good agreement between the simulated and experimental findings, indicating the applicability of the simulation model. The parameter study reveals that higher cover factors result in a decrease in the excess material ratio, indicating reduced material deposition outside the joining zone. The filling time required to completely fill the joining zone is influenced by both the cover size and the opening angle of the joining zone. The optimal parameter combinations depend on whether the filling time or the excess material volume is to be minimized. Cavity formation within the joining zone was identified as a critical factor affecting the completeness of the filling. The study provides insights into the influence of cover screens on the electrochemical joining process and offers guidance for optimizing the design of the joining zone.
To achieve higher functionality in mechatronic systems, the management of disturbance factors plays a crucial role. For this purpose, a method was developed in prior works to address this management via the optimisation of product structures. However, this method lacks applicability due to the complexity of one step of the method. It is the goal of this paper to present a software tool, utilizing cluster-analysis to sort components into assemblies, with which this step is supported. Additionally, the method is generally adapted to address a wider spectrum of phenomena in mechatronic systems.