The acquisition of data is important for the digitalisation of production and product development as well as for digital twins. In the scope of this contribution, the integration of sensors close to a process for measuring the quantity of interest at its point of origin is presented. Therefore, a classification of measurement locations in
Product developers are faced with the challenge of covering an ever-increasing external variety with as little internal variety as possible. Modular product architectures offer one way of resolving the challenge. They have an impact on all life phases and on economic targets. These effects are represented in the Impact Model of Modular Product Families. A large number of modularization methods can be found in the literature. The modularization methods consist of different activities: decomposition of product, analysis and revision of components, and reintegration to modules. Module drivers play a major role in reintegration, as they determine which components together form a module. It is not yet clear what effects different modularization methods involving different module drivers have on economic targets. For this reason, the module drivers are examined in their role as levers of modularity and integrated into the Impact Model via access points. By documenting the results in a specially developed uniform method step description and the Impact Model, we enable the selection of modularization methods with regard to their economic impact. The introduction is followed by the state of research. In Sec.3, the research problem and the research approach are presented. In Sec.4, the generic method step description is applied to seven modularization methods. Based thereon, the modularization methods are compared with each other with regard to their addressed economic objectives. In an explanatory example, the method selection made possible by this is presented. Finally, the results are discussed and an outlook is given.
The sensory acquisition of in situ data in technical systems is one of the key requirements set by ongoing digitalization. The sensory utilization of mechanical design elements is a step towards the accomplishment of this requirement. To set a common ground for further research in the context of sensory utilizable design elements, this paper reviews the current state of research in this topic. First, the aim, potentials and classification of sensory utilizable design elements are introduced. Next, examples of sensory utilizable design elements are presented. These examples are used to demonstrate the technical and methodical challenges that have to be addressed in order to establish sensory utilizable design elements as a solution for the requirements of digitalization.
New sensor solutions are under development in the context of digitalization in order to integrate sensory functions into systems. When integrating sensors, the three domains of mechanical, electrical and information engineering must be considered. This results in complex development processes that require suitable procedure models. However, specific procedure models for sensor selection and integration are missing. This contribution proposes a procedure model for sensor selection and integration on the basis of the Munich Procedure Model (MPM) and gives an outlook on open research questions.
Failures of machine elements can cause critical machine breakdowns, e.g. bearing damage accounts for almost 20% of all machine failures. Hence, monitoring machine elements is of particular importance for condition monitoring of gearboxes. Therefore, new approaches based on electrical impedance analysis are proposed in literature, e.g. for the measurement of rolling bearing load or damage condition with so-called sensory utilizable machine elements (SuME). For this approach, an electrical signal is transmitted through the structure to be observed and the resulting impedance is measured. With this technique it is possible to detect loads and damages not only for bearings, but also for the entire gearbox. Another application of this method can be the transmission of electrical signals through machine elements and the gearbox themselves. However, uncertainty arises with regard to the distinct signal transmission in these processes, mainly due to parasitic capacitances. In this contribution, the disturbing factors on the measured impedance of a gearbox at different working points are investigated. For this purpose, disturbance factors are systematically identified and used as basis for a full factorial experimental design for screening the operational characteristics of a gearbox. The data obtained from the tests is analyzed to identify correlations between the disturbance factors and parasitic capacitances. The experiments show a speed- and torque-dependent behavior of the parasitic capacitances in a gearbox. These results can be used for further research of SuME and structure-integrated energy supply and signal paths as well as the evaluation of related measurement data by reducing the associated uncertainty.