The stabilisation of soft soils using the traditional binders cement and quicklime are known to emit large amounts of carbon dioxide. To reduce this carbon footprint, substitutes such as industrial by-products have been thoroughly tested as viable alternatives for soil stabilisation. However, recent research has also shown that biochar from biomass pyrolysis can in some instances have a positive stabilisation effect and even result in a carbon-negative footprint. This paper presents a laboratory study to investigate the stabilisation effect of five industrial by-products and four types of biochar on three natural Norwegian soils: two clays with low and high water contents and one peat with a very high water content. The soils and binders were characterised by their mineralogical and chemical compositions. The biochars had varying stabilisation effects on the clays when combined with cement, with some negative stabilisation effects, whilst the effect was very beneficial in the peat, with a strength increase of up to 80%. The industrial by-products showed opposite results, with beneficial effects in the clays and a strength increase of up to 150%, but negative stabilisation effects in the peat. Correlating the mineralogical and chemical compositions to stabilisation effects was found to be challenging.
Interpretation of remoulded shear strength in soft clays based on lab and/or in-situ traditional testing can be simple and challenging, depending on the adopted approach. A new approach that uses CPTU data in the calculation of the slope parameter aq = Bq - 1/Q, together with laboratory fall cone and field vane shear tests data from 15 sites, demonstrates that when aq > 0.5, the clay under study can be considered as sensitive clay. The proposed relation is intended to be used as a first-order approximation of the remoulded shear strength that can be used as an indication of clay sensitivity. Further data and extended verification of the proposed approach are encouraged in the future for further validation. <!----> <!----> <!----> <!---->
NENorwegian Public Roads Administration (Npra) Climate And Environment
Norwegian Public Roads Administration (Npra) Climate And Environment
+1
Peats are abundant in the Northern Hemisphere and tropics, yet soil mechanics traditionally emphasize sands, clays, and silts, often overlooking peats. Despite this, engineering challenges related to peats, such as differential settlements and landslides, impact society. Understanding peat behavior is crucial for addressing modern issues like infrastructure resilience, CO2 emissions, and climate change adaptation, and for developing less intrusive construction methods that reduce peatland degradation. Kringelmomyra is a peatland in northern Norway where the surcharging method is being used to construct a new highway. This paper presents its geotechnical, hydrogeological, and ecological characteristics, initial quantitative data on potential changes in hydrogeology, and the remaining plant biodiversity resulting from road construction. Geotechnical testing and hydrogeological monitoring reveal complex peat stratification and minimal initial hydrogeological impact. The endangered peat moss Sphagnum venustum was found at the site, highlighting the need to monitor the impact at the site in the coming years. Continued interdisciplinary monitoring is essential to understand long-term effects and ensure sustainable construction practices on peatlands.