Olive leaf and olive mill wastewater are wastes which are produced in olive industry and can be used to obtain value-added products such as polyphenols. In this work, extracts of polyphenols from olive mill wastewater and olive leaf in an aqueous medium are obtained and their composition in polyphenols were determined and compared with those obtained using the conventional extract agent (methanol–water). The antioxidant capacity of the aqueous extracts of olive mill wastewater and olive leaf were also analysed. It was observed that the olive mill wastewater extracted in water provides a similar content of phenolic compounds in the final extract compared to extraction with methanol–water, with the main polyphenols being hydrotyrosol and tyrosol (20.1 and 6.61 mg gdw⁻¹). In the case of leaf extraction, the methanol-free extract (recovery in water after extraction with methanol–water) had a lower total phenol content compared to the methanolic extract, with the main polyphenol being oleuropein (22.73 and 9.05 mg gdw⁻¹, for the methanol and methanol-free extract, respectively). However, both extracts obtained in aqueous solution present a similar antioxidant capacity at very diluted concentrations of the original extract, with IC50 values (half-maximal antioxidant concentration) of about 20 mg TS L⁻¹. The antioxidant capacity of the extract in aqueous solution facilitates its application as an antioxidant in biological systems, like animal food, where the use of extracts based on organic solvents, like methanol, are not suitable.

In this work, poly(vinyl chloride)-based polymeric ionic liquid inclusion membranes were used in the selective separation of Fe(III), Zn(II), Cd(II), and Cu(II) from hydrochloride aqueous solutions. The ionic liquids under study were 1-octyl-3-methylimidazolium hexafluorophosphate, [omim⁺][PF₆⁻] and methyl trioctyl ammonium chloride, [MTOA⁺][Cl⁻]. For this purpose, stability studies of different IL/base polymer compositions against aqueous phases were carried out. Among all polymer inclusion membranes studied, [omim⁺][PF₆⁻]/PVC membranes at a ratio of 30/70 and [MTOA⁺][Cl⁻]/PVC membranes at a ratio of 70/30 were able to retain up to 82% and 48% of the weight of the initial ionic liquid, respectively, after being exposed to a solution of metal ions in 1 M HCl for 2048 h (85 days). It was found that polymer inclusion membranes based on the ionic liquid methyl trioctyl ammonium chloride allowed the selective separation of Zn(II)/Cu(II) and Zn(II)/Fe(III) mixtures with separation factors of 1996, 606 and, to a lesser extent but also satisfactorily, Cd(II)/Cu(II) mixtures, with a separation factor of 112. Therefore, selecting the appropriate ionic liquid/base polymer mixture makes it possible to create polymeric inclusion membranes capable of selectively separating target metal ions.

In this paper, microbial fuel cell technology with heterotrophic anodic denitrification, based on a new membrane-cathode assembly, was tested for slurry treatment and bioenergy production. Slurry is used due to its high chemical oxygen demand and a high content of nutrient compounds of nitrogen which can contaminate soil and water. The new membrane-cathode assembly systems were based on different ammonium and phosphonium cations combined with chloride, bistriflimide, phosphate, and phosphinate anions and a non-noble catalyst composed of copper and cobalt mixed-valence oxides. The influence of ionic liquids on the catalytic membrane was studied. The best membrane-cathode assembly was based on the ionic liquid catalyst [MTOA⁺][Cl⁻]-CoCu which achieved 65% of the energy reached with the Pt-Nafion^® system. The [MTOA⁺][Cl⁻]-CoCu system improved the water purification parameter, reducing the COD by up to 35%, the concentration of nitrates by up to 26%, and the organic nitrogen by up to 70% during the experiments. This novel membrane-cathode system allows for easier manufacturing, lower costs, and simpler catalysts than conventionally used in microbial fuel cells.

This study investigates the viability of a native Scenedesmus sp. strain for use in a 50 L bubble column photobioreactor designed to reduce greenhouse gas emissions under simulated spring, extreme summer, and winter conditions. The experiments were conducted by placing the reactor in a controlled climatic chamber, which allowed us to regulate the temperature, light intensity, and day–night cycles throughout the entire experiment. The results showed that under simulated spring conditions (a maximum temperature of 22 °C), the algal culture grew continuously for 61 days. Under extreme summer conditions (a maximum temperature of 39 °C), an initial drop in cell density was followed by recovery and continued growth over 75 days, although biomass production was 35% lower. Under winter conditions (a maximum temperature of 10 °C), the culture failed, indicating the need to prevent temperatures below 10 °C. In terms of biomass production, the culture densities achieved were 1.04 g L⁻¹ and 0.68 g L⁻¹ in the spring and summer trials, respectively. The Scenedesmus sp. strain demonstrated high carbon capture efficiency, tolerance to extreme heat, and sustained growth without the need for fresh medium or pH adjustments for over 60 days during spring and extreme summer conditions, confirming its potential for outdoor applications.

The implementation of a microbial fuel cell for wastewater treatment and bioenergy production requires a cost reduction, especially when it comes to the ion exchange membrane part and the catalysts needed for this purpose. Ionic liquids in their immobilized phase in proton exchange membranes and non-noble catalysts, as alternatives to conventional systems, have been intensively investigated in recent years. In the present study, a new microbial fuel cell technology, based on an ionic liquid membrane assembly for CoCu mixed oxide catalysts, is proposed to treat animal slurry. The new low-cost membrane–cathode system is prepared in one single step, thus simplifying the manufacturing process of a membrane–cathode system. The novel MFCs based on the new low-cost membrane–cathode system achieved up to 51% of the power reached when platinum was used as a catalyst. Furthermore, the removal of organic matter in suspension after 12 days was higher than that achieved with a conventional system based on the use of platinum catalysts. Moreover, struvite, a precipitate consisting of ammonium, magnesium, and phosphate, which could be used as a fertilizer, was recovered using this membrane–cathode system.