In this work, poly(vinyl chloride)-based polymeric ionic liquid inclusion membranes were used in the selective separation of Fe(III), Zn(II), Cd(II), and Cu(II) from hydrochloride aqueous solutions. The ionic liquids under study were 1-octyl-3-methylimidazolium hexafluorophosphate, [omim+][PF6−] and methyl trioctyl ammonium chloride, [MTOA+][Cl−]. For this purpose, stability studies of different IL/base polymer compositions against aqueous phases were carried out. Among all polymer inclusion membranes studied, [omim+][PF6−]/PVC membranes at a ratio of 30/70 and [MTOA+][Cl−]/PVC membranes at a ratio of 70/30 were able to retain up to 82% and 48% of the weight of the initial ionic liquid, respectively, after being exposed to a solution of metal ions in 1 M HCl for 2048 h (85 days). It was found that polymer inclusion membranes based on the ionic liquid methyl trioctyl ammonium chloride allowed the selective separation of Zn(II)/Cu(II) and Zn(II)/Fe(III) mixtures with separation factors of 1996, 606 and, to a lesser extent but also satisfactorily, Cd(II)/Cu(II) mixtures, with a separation factor of 112. Therefore, selecting the appropriate ionic liquid/base polymer mixture makes it possible to create polymeric inclusion membranes capable of selectively separating target metal ions.
The textile industry generates millions of tons of waste annually, posing significant environmental challenges. Addressing this issue, our study explores a sustainable biotechnological approach to convert cotton textile waste into valuable bioproducts. We evaluated the potential of Corynebacterium glutamicum ATCC 21492 for the production of L-lysine and other amino acids using glucose derived from cotton textile waste. Two experimental strategies were implemented: Sequential Hydrolysis and Fermentation (SHF) and Simultaneous Saccharification and Fermentation (SSF). In SHF, optimization of initial glucose concentration, temperature, and inoculum size led to the highest L-lysine concentration of 2.38 g/L under conditions of 45 g/L glucose, 35 °C, and 2% inoculum. The production of L-lysine, along with varying proportions of other amino acids such as alanine, threonine, methionine, and leucine, was significantly influenced by these parameters. In SSF, the highest L-lysine yield of 3.10 mg/g untreated cotton was achieved at 14% cotton loading, 7% enzyme dose, 35 °C, and 10% inoculum concentration, corresponding to an L-lysine concentration of 0.5 g/L. This reduced concentration, compared to SHF, is primarily attributed to limitations in cotton hydrolysis under the studied conditions. Nevertheless, C. glutamicum utilized alternative carbon sources present in the culture medium, leading to a diversified amino acid profile in the final product. These findings support the feasibility of textile waste bioconversion using C. glutamicum and highlight its potential as a sustainable platform for amino acid production, aligning with circular economy principles and contributing to the reduction of the textile industry’s environmental impact.