Electrification using renewable energy sources represents a clear path toward solving the current global energy crisis. In Colombia, this challenge also involves the diversification of the electrical energy sources to overcome the historical dependence on hydropower. In this context, green hydrogen represents a key energy carrier enabling the storage of renewable energy as well as directly powering industrial and transportation sectors. This work explores the realistic potential of the main renewable energy sources, including solar photovoltaics (8172 GW), hydropower (56 GW), wind (68 GW), and biomass (14 GW). In addition, a case study from abroad is presented, demonstrating the feasibility of using each type of renewable energy to generate green hydrogen in the country. At the end, an analysis of the most likely regions in the country and paths to deploy green hydrogen projects are presented, favoring hydropower in the short term and solar in the long run. By 2050, this energy potential will enable reaching a levelized cost of hydrogen (LCOH) of 1.7, 1.5, 3.1 and 1.4 USD/kg-H2 for solar photovoltaic, wind, hydropower and biomass, respectively.
The development of photoelectrochemical water oxidation (PEC) systems has gained significant relevance in recent years due to the quest for clean fuels, where green hydrogen is one of the main actors in the energy transition. Particularly, there has been a need for precious metal‐free electrodes and photoelectrodes that demonstrate high efficiency and stability aiming at having large‐scale and low‐cost green hydrogen production systems. This work shows advances toward this goal by using nonprecious catalysts and solution‐processed materials to achieve efficient, low‐cost, and stable photoelectrodes. Specifically, carbon‐based hybrid perovskite photoelectrodes coupled with an earth‐abundant Nickel‐Iron layered double hydroxide (NiFe‐LDH) catalyst (carbon/NiFe‐LDH) are fabricated and evaluated for oxygen evolution reaction (OER). Devices with an active area of 1.1 cm 2 exhibit evaluated over 12 h of continuous operation, a 4.57% ABPE at 0.64 V RHE , and a photocurrent density of 11.71 mA cm −2 at 1.23 V RHE . The incorporation of graphite tape results in a system (C/GT/NiFe‐LDH) that shows an exceptional operational stability over 125 h and efficiency for this type of photoelectrode with a high photocurrent density of 18.07 mA cm −2 at 1.23 V RHE and 8.51% ABPE at 0.67 V RHE .
A photoelectrochemical reactor designed and fabricated from ABS using 3D printing with geometric simplicity and modular assembly is presented, which facilitates flexible scaling and easy adaptation to diverse experimental configurations. It is specifically intended for the evaluation of photoelectrodes aimed at green hydrogen production through water photoelectrolysis. The system displays a dual-compartment configuration separated by a gas-selective membrane, enabling precise characterization of PEC (photoelectrochemical cell) devices. The proof of concept demonstrates the functionality of reactor under laboratory conditions, reaching a current Technology Readiness Level (TRL) between 3 and 4, with ongoing development toward higher TRLs through materials optimization and extended stability testing. The reactor represents a promising approach due to its low cost, scalability, compact integration, and potential to enable future solar-powered hydrogen production. Its accessible design makes it particularly suitable for educational environments and training in solar fuel technologies. With a realistic pathway for scaling to higher TRLs, the system serves as a flexible platform for continued innovation. Furthermore, its compact and energy-efficient configuration positions it as a reliable candidate for future integration with autonomous solar setups, supporting decentralized hydrogen generation.
1 January 2023 in Revista Facultad de Ingeniería Universidad de Antioquia
The development of a binder-free material is gaining ground as a flexible anode in lithium-ion batteries due to the higher specific capacity and possibilities of usage in portable appliances. In this work, magnetite nanoparticles (Fe3O4-NPs) were incorporated into carbon microfibers (CMFs) by electrospinning technique to improve the specific capacity of active material, retaining the high flexibility of the CMFs. The composite active material (CMFs-Fe3O4) was characterized by Raman spectroscopy, Thermogravimetric analyses (TGA), and transmission electron microscopy (TEM) to determine the composition, structure, and morphology of the composite. Electrochemical tests were done to evaluate the performance of the composite material as an anode in lithium-ion batteries. Fe3O4-NPs with particle sizes from 30 to 40 nm were incorporated into CMFs (800 nm), and the TEM images showed a homogeneous distribution of Fe3O4-NPs. The electrochemical tests evidenced that magnetite incorporation increases the specific capacity by 42% on the first cycle and 20% on the 50th cycle. Similarly, the Coulombic efficiency increases by 20% in the composite material.