In the present study, enhanced wet oxidation of excess sludge from pharmaceutical wastewater by NaOH as an alkaline homogeneous catalyst was investigated. The experiments were carried out in a stainless-steel batch autoclave reactor. The highest volatile suspended solids (VSS) removal rate, 95.2%, was achieved at 260 °C within 60 min with an initial oxygen pressure of 1.0 MPa and NaOH 0.5 g·L⁻¹. Simultaneously, the chemical oxygen demand (COD) removal rate of 57.3% was reached. The increase in volatile fatty acids (VFAs) demonstrated that the degradation of sludge was greatly accelerated by NaOH. Interestingly, the production of acetic acid, an intermediate by-product generated from the oxidation of organic compounds, increased significantly. These results illustrated that NaOH is a promising catalyst for the utilization of wet oxidation liquid of excess sludge as a carbon source for the treatment of wastewater.

The wet oxidation of pharmaceutical sludge for the treatment and production of value-added materials was investigated. The experiments were carried out in a stainless-steel autoclave reactor with chemical synthetic pharmaceutical sludge. The highest removal rate of total suspended solids (90.1%) and volatile suspended solids (98.4%) was achieved at 260 °C for 60 min with an initial oxygen pressure of 0.8 MPa. Simultaneously, the total chemical oxygen demand removal rate (78.7%) and the soluble chemical oxygen demand removal rate (81.6%) were obtained. The volatile fatty acid concentration—including acetic acid, propanoic acid, isobutyric acid and isovaleric acid—increased to 4819 mg/L with pH 12.56, which indicated the possibility of improving the quality of wet oxidized sludge solution as a potential carbon source by adding reagents. Scanning electron microscopy images showed that the sludge became a loose porous structure after wet oxidation, which is beneficial for dewatering performance. Energy dispersive spectroscopy images illustrate that carbon elements in sludge migrate from solid to liquid phases during the wet oxidation process. These results provide meaningful data for the design of further works and demonstrate that wet oxidation is a promising method for the treatment of pharmaceutical sludge, and the produced volatile fatty acids, including acetic acid and propanoic acid, are potential carbon sources for the biological treatment of wastewater.

The treatment of antibiotic mycelial residue (AMR) has emerged as a critical challenge hindering the sustainable development of the biopharmaceutical industry. As a representative hazardous solid waste generated during antibiotic manufacturing processes, AMR may pose substantial risks to environmental safety. This review elucidates the properties and hazards of AMR while systematically reviewing current mainstream treatment technologies. Building upon the elucidation of underlying mechanisms, it further examines the application bottlenecks and research progress associated with different techniques. Through a comprehensive understanding of existing research achievements, this paper proposes future development strategies and perspectives for AMR treatment, highlighting that integrated multi-technology treatment approaches may represent the predominant developmental direction in this field.

Many volatile fatty acids (VFAs) are produced after wet air oxidation, which could be a potential carbon source. In this study, we investigated the impact of NaOH on the removal of hazardous organics and the changes in the produced carbon source. The total and soluble chemical oxygen demand (SCOD) removal rates decreased to 47.9% and 55.3% with 51.6% NaOH addition. The removal rates of total suspended solids (82–85%) and volatile suspended solids (97–99%) remained stable under all conditions. Additionally, the concentrations of acetic acid and isovaleric acid increased with a high pH value. Fluorescent substances closely related to aromatic protein and fulvic acid-like substances were identified and degraded significantly with the addition of NaOH. Moreover, 41.3% NaOH addition (initial pH 13.0) could yield a VFAs/SCOD ratio of 30.5%, demonstrating the good biocompatibility of the carbon source. The effect of the nitrogen element was also considered, with the ratio of the 5-day biological oxygen demand to the total nitrogen being 7.2, indicating that the oxidation solution could provide an abundant carbon source. Thus, the sludge-derived carbon source is suitable to supply biological treatment units for municipal wastewater.