This work reported new voltammetric/amperometric-based protocols using a commercial boron-doped diamond (BDD) electrode for simple and fast simultaneous detection of sulfide and nitrite from water. Square-wave voltammetry operated under the optimized working conditions of 0.01 V step potential, 0.5 V modulation amplitude and 10 Hz frequency allowed achieving the best electroanalytical parameters for the simultaneous detection of nitrite and sulfide. For practical in-field detection applications, the multiple-pulsed amperometry technique was operated under optimized conditions, i.e., −0.5 V/SCE for a duration of 0.3 s as conditioning step, +0.85 V/SCE for a duration of 3 s that assure the sulfide oxidation and +1.25 V/SCE for a duration of 0.3 s, where the nitrite oxidation occurred, which allowed the simultaneously detection of sulfide and nitrite without interference between them. Good accuracy was found for this protocol in comparison with standardized methods for each anion. Also, no interference effect was found for the cation and anion species, which are common in the water matrix.

The paper presents a new method of layered double hydroxide (LDH) synthesis starting from secondary sources, namely acidic residual solutions. The iron content of the acidic solution resulting from the pickling step of the hot-dip galvanizing process make it suitable to be used as an iron precursor in LDH synthesis. Here, Mg₄Fe–LDH synthesized through the newly proposed method presented structural and morphological characteristics similar to the properties of layered double hydroxides synthesized from analytical-grade reagents. Moreover, the as-synthesized LDH and its calcined product presented efficient adsorption properties in the removal process of Mo(VI) from aqueous solutions. The adsorption studies are discussed from the equilibrium, kinetic, and thermodynamic points of view. The proposed novel technologies present both economic and environmental protection benefits.

Incineration of sewage sludge produces every year huge amounts of sewage sludge ash. Due to its porosity and composition, sewage sludge ash can be used as an adsorbent for heavy metal ions removal. The present paper discusses the efficiency and feasibility of its use as an adsorbent for Pb (II) and Cu (II) removal in single and binary systems. Sewage sludge ash dosage, pH influence, equilibrium and kinetic studies were examined. The results show that sewage sludge ash is an effective and environmentally friendly adsorbent. The maximum adsorption capacity was 25.0 mg/g for Pb (II) and 7.5 mg/g for Cu (II). The presence of the competitive metal led to lower adsorption rate. The study concludes that sewage sludge ash is a promising adsorbent for Pb (II) and Cu (II) removal from wastewater presenting both economic and environmental benefits.

Palladium is a noble metal of the platinum group metals (PGMs) with a high value and major industrial applications. Due to the scarce palladium resources, researchers’ attention is currently focused on Pd ions recovery from secondary sources. Regarding the recovery process from aqueous solutions, many methods were studied, amongst which adsorption process gained a special attention due to its clear advantages. Moreover, the efficiency and the selectivity of an adsorbent material can be further improved by functionalization of various solid supports. In this context, the present work aims at the synthesis and characterization of Mg₃Al-LDH and its functionalization with ionic liquid (IL) (Methyltrialkylammonium chloride) to obtain adsorbent materials with high efficiency in Pd removal from aqueous solutions. The maximum adsorption capacity developed by Mg₃Al-LDH is 142.9 mg Pd., and depending on the functionalization method used (sonication and co-synthesis, respectively) the maximum adsorption capacity increases considerably, q_max-Mg₃Al IL-US = 227.3 mg/g and q_max-Mg₃Al IL-COS = 277.8 mg/g.

The present paper describes a new way of obtaining an efficient adsorbent material by functionalization of Mg₃Al layered double hydroxides (LDH) with methyl trialkyl ammonium chloride-ionic liquid (IL) using two methods: ultrasound and cosynthesis. Layered double hydroxides are good solid support for the functionalization with ionic liquids due to their well-ordered structure. The immobilization of the ILs in suitable solid supports combine the advantages of the ILs with the properties of the solid supports bringing more benefits such as use of lower quantity of ILs and avoiding of ILs loss in the aqua phase which overall decrease the treatment costs. In case of ultrasound method of functionalization is assured a uniform distribution of IL on the solid surface, but through immobilization by cosynthesis due to the tunable properties of LDH, is assured an intercalation of the ILs between the LDH layers. This fact was highlighted by the X-ray diffraction (RXD), scanning electron microscopy (SEM) analyses and Fourier-transform infrared (FTIR) spectroscopy of the obtained adsorbent. The added value brought by the functionalization of Mg₃Al with the studied IL was underlined by the adsorption studies conducted in the treatment process of water with diclofenac content. Kinetic, thermodynamic, and equilibrium studies were performed. DCF adsorption onto the studied materials correspond to a chemisorption, the pseudo-second-order kinetic model describing the most accurately the experimental data. DCF adsorption onto the studied materials occurs as a heterogeneous process, with the experimental data fitting best with the SIPS isotherm. The sample obtained through cosynthesis developed a maximum adsorption capacity of 648 mg/g.