Shannon Young

Shannon Young

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 April 2024 in Remote Sensing
Verified
Journal Article
Open access
PDF file
ASAaron Michael Schinder
Aaron Michael Schinder
SYShannon Young
Shannon Young
BSBryan Jeffrey Steward
Bryan Jeffrey Steward
MDMichael Dexter
Michael Dexter
AKAndrew Kondrath
Andrew Kondrath
RDRicardo Davila
Ricardo Davila
This paper describes the creation of a fast, deterministic, 3D fractal cloud renderer for the AFIT Sensor and Scene Emulation Tool (ASSET). The renderer generates 3D clouds by ray marching through a volume and sampling the level-set of a fractal function. The fractal function is distorted by a displacement map, which is generated using horizontal wind data from a Global Forecast System (GFS) weather file. The vertical windspeed and relative humidity are used to mask the creation of clouds to match realistic large-scale weather patterns over the Earth. Small-scale detail is provided by the fractal functions which are tuned to match natural cloud shapes. This model is intended to run quickly, and it can run in about 700 ms per cloud type. This model generates clouds that appear to match large-scale satellite imagery, and it reproduces natural small-scale shapes. This should enable future versions of ASSET to generate scenarios where the same scene is consistently viewed from both GEO and LEO satellites from multiple perspectives.

5 August 2025 in Signals
Verified
Journal Article
Open access
PDF file
WJWill Johnston
Will Johnston
SYShannon Young
Shannon Young
DHDavid Howe
David Howe
RORachel Oliver
Rachel Oliver
ZTZachry Theis
Zachry Theis
MDMichael Dexter
Michael Dexter
Event-based vision sensors (EVSs), often referred to as neuromorphic cameras, operate by responding to changes in brightness on a pixel-by-pixel basis. In contrast, traditional framing cameras employ some fixed sampling interval where integrated intensity is read off the entire focal plane at once. Similar to traditional cameras, EVSs can suffer loss of sensitivity through scenes with high intensity and dynamic clutter, reducing the ability to see points of interest through traditional event processing means. This paper describes a method to reduce the negative impacts of these types of EVS clutter and enable more robust target detection through the use of individual pixel frequency analysis, background suppression, and statistical filtering. Additionally, issues found in normal frequency analysis such as phase differences between sources, aliasing, and spectral leakage are less relevant in this method. The statistical filtering simply determines what pixels have significant frequency content after the background suppression instead of focusing on the actual frequencies in the scene. Initial testing on simulated data demonstrates a proof of concept for this method, which reduces artificial scene noise and enables improved target detection.

9 April 2026 in Sensors
Verified
Journal Article
Open access
PDF file
WJWill Johnston
Will Johnston
AFAnthony Franz
Anthony Franz
SYShannon Young
Shannon Young
RORachel Oliver
Rachel Oliver
ZTZachry Theis
Zachry Theis
MDMichael Dexter
Michael Dexter
Event-based vision sensors (EVSs) provide unique frequency analysis opportunities due to their event data output and high temporal resolution. Anomaly detection methods used in hyperspectral analysis can be used on the event frequency spectra to detect targets. However, the introduction of a strong, flickering interfering source can reduce the EVS sensitivity and obscure targets of interest. Previous work presented a method showing that targets could still be detected through an overwhelming source using frequency analysis, background suppression, and statistical filtering. This paper extends that research and compares the ability of five different eigenanalysis anomaly detection methods (principal component background suppression (PCBS) with peak threshold detection, Mahalanobis distance (MD) detector, complementary subspace detector (CSD), Reed–Xiaoli (RX) detector, and subspace Reed–Xiaoli (SSRX) detector) to detect targets in a high noise environment. The PCBS, MD, and CSD detectors performed well and were able to detect the targets through the overwhelming source. The PCBS detector had the best performance at low false-alarm rates (a > 400% detection probability increase at a false-alarm probability of 10−5). While the MD and CSD detectors had the best detection at higher false-alarm probabilities (approximately 7 × 10−2), the MD detector had a sub-second execution time. Depending on the application, the PCBS or MD detector are the best choice out of these five methods to detect targets in this type of high noise environment.

14 August 2026 in Sensors
Verified
Journal Article
Open access
PDF file
MMMitchell Anthony Manzardo
Mitchell Anthony Manzardo
MDMichael Dexter
Michael Dexter
SYShannon Young
Shannon Young
JBJohn Bowlan
John Bowlan
AFAnthony Franz
Anthony Franz
Accurate temperature and emissivity separation from thermal infrared radiance is essential for characterizing materials under high-temperature laboratory conditions. Existing temperature and emissivity separation methods have largely been developed for multispectral remote sensing applications, where long atmospheric path lengths require extensive atmospheric compensation. In contrast, the current work considers hyperspectral laboratory measurements acquired over a short optical path, where atmospheric effects are comparatively small but increased measurement uncertainty remains within portions of the measured spectrum. The ABB MR304 FTIR spectrometer used in this study exhibits reduced optical transmission below approximately 2.5 μm, producing increased measurement uncertainty within the spectral region containing much of the temperature information. To address these conditions, a modified Gray Body Emissivity method, referred to as the Robust Ratio Linear Fitting method, was developed using robust linear regression, spectral masking, and iterative temperature refinement. The algorithm was validated by comparing the retrieved temperatures with pyrometer measurements and the retrieved spectral emissivities with a high-accuracy spectral emissivity database collected using a SOC-100 hemispherical directional reflectometer. When applied to radiance measurements of a carbon phenolic sample heated using a plasma torch and measured with an ABB MR304 FTIR spectrometer, the algorithm retrieved temperatures with a mean absolute percentage error of 3.05% and spectral emissivities with a mean absolute percentage error of 3.13% relative to the SOC-100 reference measurements. Although the method is ineffective at lower temperatures where the peak of the Planck radiance lies within excluded spectral regions, the results demonstrate that the proposed approach provides accurate temperature and emissivity retrieval for high-temperature laboratory FTIR measurements acquired under these experimental conditions.

23 October 2023
Verified
Conference Paper
Closed access
PDF file
JMJames D. Menezes
James D. Menezes
ACAyden M. Coughlin
Ayden M. Coughlin
BWBret M. Wagner
Bret M. Wagner
BSBryan J. Steward
Bryan J. Steward
SYShannon Young
Shannon Young
The Air Force Institute of Technology (AFIT) created the AFIT Sensor and Scene Emulation Tool (ASSET) which aims to produce accurate and realistic electro-optical and infrared (EO/IR) data. While working to validate ASSET’s cloud free radiometry calculations, researchers demonstrated that the radiometric accuracy of synthetic data can be improved using Hyperspectral Imagery (HSI). This research addresses the lack of accurate HSI reflectance data required by ASSET to perform scene generation with two novel machine learning (ML) models and a scene generation process. Two Convolutional Neural Network (CNN) models, a U-Net and a Pix2Pix Generative Adversarial Network (GAN), are trained using multi-sensor data including land classification, elevation, texture, and HSI image data. The ML model processes image chips as inputs to a novel rendering process, generating realistic whole-Earth hyperspectral reflectance maps between 480 nm and 2500 nm. To study the accuracy of this model and rendering process, generated data was compared against truth HSI data using Mean Absolute Error (MAE), Mean Squared Error (MSE), and image quality metrics, such as Structural Similarity (SSIM) and Peak-Signal-to-Noise-Ratio (PSNR). This paper details the current stage of model development and the possible contributions of the model to ASSET and synthetic scene generation.