Event-based vision sensors (EVSs), often referred to as neuromorphic cameras, operate by responding to changes in brightness on a pixel-by-pixel basis. In contrast, traditional framing cameras employ some fixed sampling interval where integrated intensity is read off the entire focal plane at once. Similar to traditional cameras, EVSs can suffer loss of sensitivity through scenes with high intensity and dynamic clutter, reducing the ability to see points of interest through traditional event processing means. This paper describes a method to reduce the negative impacts of these types of EVS clutter and enable more robust target detection through the use of individual pixel frequency analysis, background suppression, and statistical filtering. Additionally, issues found in normal frequency analysis such as phase differences between sources, aliasing, and spectral leakage are less relevant in this method. The statistical filtering simply determines what pixels have significant frequency content after the background suppression instead of focusing on the actual frequencies in the scene. Initial testing on simulated data demonstrates a proof of concept for this method, which reduces artificial scene noise and enables improved target detection.
Event-based vision sensors (EVSs) provide unique frequency analysis opportunities due to their event data output and high temporal resolution. Anomaly detection methods used in hyperspectral analysis can be used on the event frequency spectra to detect targets. However, the introduction of a strong, flickering interfering source can reduce the EVS sensitivity and obscure targets of interest. Previous work presented a method showing that targets could still be detected through an overwhelming source using frequency analysis, background suppression, and statistical filtering. This paper extends that research and compares the ability of five different eigenanalysis anomaly detection methods (principal component background suppression (PCBS) with peak threshold detection, Mahalanobis distance (MD) detector, complementary subspace detector (CSD), Reed–Xiaoli (RX) detector, and subspace Reed–Xiaoli (SSRX) detector) to detect targets in a high noise environment. The PCBS, MD, and CSD detectors performed well and were able to detect the targets through the overwhelming source. The PCBS detector had the best performance at low false-alarm rates (a > 400% detection probability increase at a false-alarm probability of 10−5). While the MD and CSD detectors had the best detection at higher false-alarm probabilities (approximately 7 × 10−2), the MD detector had a sub-second execution time. Depending on the application, the PCBS or MD detector are the best choice out of these five methods to detect targets in this type of high noise environment.