The femtosecond GHz-burst mode laser processing has attracted much attention in the last few years. Very recently, the first percussion drilling results obtained in glasses using this new regime were reported. In this study, we present our latest results on top-down drilling in glasses, focusing specifically on the influence of burst duration and shape on the hole drilling rate and the quality of the drilled holes, wherein holes of very high quality with a smooth and glossy inner surface can be obtained. We show that a decreasing energy repartition of the pulses within the burst can increase the drilling rate, but the holes saturate at lower depths and present lower quality than holes drilled with an increasing or flat energy distribution. Moreover, we give an insight into the phenomena that may occur during drilling as a function of the burst shape.

In this contribution, we present a comparative study on top-down drilling in sodalime glass, with a femtosecond laser operating in single-pulse, MHz-burst and GHz-burst modes, respectively. We investigate the hole depth, drilling rate, and hole morphology for these three regimes while keeping the same experimental conditions. We demonstrate that, for both burst regimes, the burst length has to be adapted for optimizing the hole depth. In the GHz-burst regime, the lower the ablation rate the longer the holes. The three drilling regimes lead to different hole morphologies, where the GHz-burst mode results in the best hole quality featuring glossy inner walls and an almost cylindrical morphology. Furthermore, we obtain crack-free holes, the deepest measuring 3.7 mm in length and 25 µm in entrance diameter corresponding to an aspect ratio of 150, which is the highest aspect ratio reported thus far with femtosecond GHz-burst drilling to the best of our knowledge.

We report, for the first time to the best of our knowledge, Bessel beam dielectrics cutting with a femtosecond laser in GHz-burst mode. The non-diffractive beam shaping is based on the use of an axicon and allows for cutting glasses up to 1 mm thickness with an excellent cutting quality. Moreover, we present a comparison of the cutting results with the state-of-the-art method, consisting of short MHz-bursts of femtosecond pulses. We further illustrate the influence of the laser beam parameters such as the burst energy and the pitch between consecutive Bessel beams on the machining quality of the cutting plane and provide process windows for both regimes.

We investigate the elongated modifications resulting from a Bessel beam-shaped femtosecond laser in fused silica under three different operation modes, i.e., the single-pulse, MHz-burst, and GHz-burst regimes. The single-pulse and MHz-burst regimes show rather similar behavior in glass, featuring elongated and slightly tapered modifications. Subsequent etching with Potassium Hydroxide exhibits an etching rate and selectivity of up to 606 $\mathsf{\mu }$m/h and 2103:1 in single-pulse operation and up to 322 $\mathsf{\mu }$m/h and 2230:1 in the MHz-burst regime, respectively. Interestingly, in the GHz-burst mode, modification by a single burst of 50 pulses forms a taper-free hole without any etching. This constitutes a significant result paving the way for chemical-free, on-the-fly drilling of high aspect-ratio holes in glass.

In this study, we report, for the first time, to the best of our knowledge, on in-volume glass modifications produced by GHz bursts of femtosecond pulses. We compare three distinct methods of energy deposition in glass, i.e., the single-pulse, MHz burst, and GHz burst regimes, and evaluate the resulting modifications. Specifically, we investigate in-volume modifications produced by each regime under varying parameters such as the pulse/burst energy, the scanning velocity, and the number of pulses in the burst, with the aim of establishing welding process windows for both sodalime and fused silica.

Laser-driven ion acceleration, as produced by interaction of a high-intensity laser with a target, is a growing field of interest. One of the current challenges is to enhance the acceleration process, i.e., to increase the produced ion energy and the ion number and to shape the energy distribution for future applications. In this paper, we investigate the effect of helical coil (HC) targets on the laser–matter interaction process using a 150 TW laser. We demonstrate that HC targets significantly enhance proton acceleration, improving energy bunching and beam focusing and increasing the cutoff energy. For the first time, we extend this analysis to carbon ions, revealing a marked reduction in the number of low-energy carbon ions and the potential for energy bunching and post-acceleration through an optimized HC design. Simulations using the particle-in-cell code SOPHIE confirm the experimental results, providing insights into the current propagation and ion synchronization mechanisms in HCs. Our findings suggest that HC targets can be optimized for multispecies ion acceleration.