Batteries are becoming highly important in automotive and power system applications. The lithium-ion battery, as the fastest growing energy storage technology today, has its specificities, and requires a good understanding of the operating characteristics in order to use it in full capacity. One such specificity is the dependence of the one-way charging/discharging efficiency on the charging/discharging current. This paper proposes a novel method for the determination of battery capacity based on experimental testing. The proposed method defines battery energy capacity as the energy actually stored in the battery, while accounting for both the charging and discharging losses. The experiments include one-way efficiency determination based on multiple cycles conducted under different operational and ambient conditions, the goal of which is to acquire the charging/discharging energies. The measured energies are corrected for one-way efficiencies to obtain values actually stored in a battery during charging or actually extracted from the battery during discharging. The proposed method is tested in a laboratory and compared against two existing baseline methods at different ambient temperatures. The results indicate that the proposed method significantly outperforms the baseline methods in terms of the accuracy of the determined battery energy capacity and state-of-energy. The prime reason for the good performance of the proposed method is that it accounts for both the operational (efficiency) and the ambient (temperature) conditions.
Battery-powered electric vehicles are gradually expanding their market outside of the typical public and private transportation sector. A good example is a growing demand for electrification of special-purpose vehicles such as compact urban vacuum sweeper trucks. These vehicles are characterized by low production numbers and specific limitations such as restricted volume for battery placement, specific working conditions, requirement to supply electro-hydraulic systems, etc. Therefore, the selection of optimal battery cell and identification of its required characteristics is not a straightforward task. This article addresses this by presenting a methodology for selecting optimal battery cell for compact urban vacuum sweepers. A laboratory testing procedure is established to measure electric and heating characteristics of candidate battery types and battery producers. After evaluation of the experimental test results using the Analytic Hierarchy Process (AHP), the most appropriate battery cell is selected. The experimental tests and the presented AHP methodology prove that battery cell selection for a specific purpose based solely on manufacturers' datasheet can result in a sub-optimal decision.
28 June 2024 in IEEE Transactions on Power Systems
This paper presents a realistic yet linear model of battery energy storage to be used for various power system studies. The presented methodology for determining model parameters is based on experimental data obtained on lithium-ion cells of four different technologies. The model itself takes into account two important, but often neglected battery characteristics: (i) variable energy charging/discharging efficiency, and (ii) nonlinear energy charging curve. The proposed model is compared with three simplified models, taking into account only one or zero of the above two mentioned battery characteristics. To prove the applicability and advantages in practice, all four models are used to obtain the optimal day-ahead market schedules of a battery storage and the feasibility of the obtained schedules is experimentally validated using a dedicated testbed. On top of the proposed model, this paper contributes to the community by providing battery parameters for the four most common lithium-ion technologies: LCO, LFP, LTO and NMC.
This paper presents a model of multiple DC microgrids with battery energy storage systems and demand response capability, taking part in primary frequency regulation of electrical power system. Although DC microgrids can contribute to stability and efficiency of frequency regulation, these complex systems may cause serious stability issues due to the imperfect communication. This work presents possible scenarios of unstable primary frequency regulation in a simplified model of electrical power system with DC microgrids, which are controlled through communication network.