Maksym Lazarenko

Prof. Dr. Maksym Lazarenko

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 July 2017 in Discover Nano
Verified
Journal Article
Open access
PDF file
KKKostiantyn M. Kovalov
Kostiantyn M. Kovalov
OAOlexander M. Alekseev
Olexander M. Alekseev
MLMaksym Lazarenko
Maksym Lazarenko
YZYu F. Zabashta
Yu F. Zabashta
YGYurii E. Grabovskii
Yurii E. Grabovskii
STSergii Yu Tkachov
Sergii Yu Tkachov
Influence of water in the different states on a structure and dielectric properties of microcrystalline cellulose were studied by of X-ray, thermogravimetry, and dielectric spectroscopy. At research of microcrystalline cellulose (MCC) with different content of water, it is shown that the molecules of water are located in the macropores of MCC and in multimolecular hydrated layers. It is shown that at the increase of concentration of water in a hydrated shell, the reorganization of molecules of cellulose in the surface of crystallites takes place, and as a result, their transversal size and crystallinity increase. It is shown that during the concentration of water, more than 13% in a continuous hydrated shell of crystallites appears. Temperature dependences of actual and imaginary parts of complex dielectric permittivity were studied in the interval of temperatures [−180 ÷ 120] °C on frequencies of f = 5, 10, 20, and 50 kHz. A low-temperature relaxation process and high-temperature transition were observed. Low-temperature relaxation process which is related to transition of surface methylol groups of molecules of cellulose conformation from tg to tt is shifted toward low temperatures at the increase of concentration of water in microcrystalline cellulose.

8 February 2017 in Discover Nano
Verified
Journal Article
Open access
PDF file
MNMaksym Nedielko
Maksym Nedielko
SHSmail Hamamda
Smail Hamamda
OAOlexander Alekseev
Olexander Alekseev
VCVitalii Chornii
Vitalii Chornii
MDMykola Dashevskii
Mykola Dashevskii
VSVasyl Scherbatskyi
Vasyl Scherbatskyi
The set of composite materials that consist of micro/nanocellulose and complex K2Eu(MoO4)(PO4) luminescent oxide particles was prepared. The composites were studied by means of scanning electron microscopy, XRD analysis, dilatometry, differential scanning calorimetry and thermogravimetric analysis, and dielectric and luminescence spectroscopy. Dependencies of density, crystallinity, relative extension, thermal extension coefficient, dielectric relaxation parameters, intensity and shape of photoluminescence bands on temperature, and content of oxide component were studied. The structure of the composite without oxide is formed by grains of nearly 5–50 μm in size (crystallinity is about ~56%). Structure of the micro/nanocellulose samples which contain oxide particles is similar, but the cellulose grains are deformed by oxide particles. Dependencies of the abovementioned properties on temperature and oxide content were analyzed together with data on the size distribution of oxide particles for the samples for various oxide and molecules of water concentrations.

31 August 2021 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
NFNataliia Fialko
Nataliia Fialko
RDRoman Dinzhos
Roman Dinzhos
JSJulii Sherenkovskii
Julii Sherenkovskii
NMNataliia Meranova
Nataliia Meranova
DIDiana Izvorska
Diana Izvorska
NKNeli Koseva
Neli Koseva
This paper reports the experimental study carried out to establish the dependence of the thermal conductivity of polypropylene-based nanocomposites filled with carbon nanotubes on the main parameter of the temperature regime of their manufacturing ‒ the level of overheating a polymer melt relative to its melting point. The study has been conducted for nanocomposites that were manufactured by applying a method based on the mixing of components in the polymer melt applying a special disk extruder. During the composite manufacturing process, the level of melt overheating varied from 10 to 75 K, with the mass share of filler ranging from 0.3 to 10.0 %. It is shown that increasing the overheating of a polymer melt causes an increase in the thermal conductivity of the composites. However, when the overheating has reached a certain value, its further growth does not increase the thermal conductivity of nanocomposites. Based on the established pattern, the rational level of this overheating has been determined. That resolves the tasks of manufacturing highly heat-conducting nanocomposites and implementing appropriate energy-saving technology. Data have been acquired on the effects of the impact of the amount of polymer melt overheating on the values of the first and second percolation thresholds for the examined nanocomposites. It is established that the value of the first percolation threshold is more sensitive to the specified amount of overheating. The dependences of the density of the examined composites on the level of polymer melt overheating have been derived. The correlation between a given dependence and the nature of a corresponding change in the thermal conductivity of the composites has been established. Applying the proposed highly heat-conducting nanocomposites is promising for micro and nanoelectronics, energy, etc.

1 December 2017 in Inorganic Materials
Verified
Journal Article
Closed access
PDF file
AAA. N. Alekseev
A. N. Alekseev
MLMaksym Lazarenko
Maksym Lazarenko
MLM. V. Lazarenko
M. V. Lazarenko
KKK. N. Kovalev
K. N. Kovalev
STS. Yu. Tkachev
S. Yu. Tkachev
A method for determining the complex dielectric permeability of liquids based on the temperature changes in geometrical parameters (thickness) of samples and over the phase transition range is...

1 April 2019 in Ukrainian Journal of Physics
Verified
Journal Article
Open access
PDF file
OAO. M. Alekseev
O. M. Alekseev
YZYu. F. Zabashta
Yu. F. Zabashta
Valery KovalchukValery Kovalchuk
Valery Kovalchuk
MLMaksym Lazarenko
Maksym Lazarenko
LBLeonid Bulavin
Leonid Bulavin
The viscosity, turbidity, and heat capacity of dilute aqueous solutions of hydroxypropyl cellulose have been studied in a concentration interval of 0.047–1.5 g/l and a temperature interval of 20–80 ∘C. The data obtained testify that, if the temperature does not exceed 40 ∘C, hydroxypropyl cellulose molecules are prolate spheroidal globules with semiaxis lengths of 7 and 490 ˚ A. At temperatures above 70 ∘C, the hydroxypropyl cellulose solution consists of clusters; every cluster is composed of 11 globules and has a prolate spheroidal form with semiaxes of 41 and 490 ˚ A. In the temperature interval from 40 to 70 ∘C, the solution concerned contains both globules and clusters, with the concentration of the latter increasing, as the temperature grows.

30 April 2022 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
NFNataliia Fialko
Nataliia Fialko
RDRoman Dinzhos
Roman Dinzhos
JSJulii Sherenkovskii
Julii Sherenkovskii
NMNataliia Meranova
Nataliia Meranova
VPViktor Prokopov
Viktor Prokopov
VMVolodymyr Makhrovskyi
Volodymyr Makhrovskyi
A set of experimental studies has been carried out to establish the effect of the mixing time of components of nanocomposite materials on their thermal conductivity, specific heat, and density. The physical properties of polypropylene-carbon nanotube composites were to be studied. During the experiments, the duration of mixing of the components in the melt of the polymer varied from 5 to 52 minutes, the mass fraction of the filler ‒ in the range of 0.3...10 %, and nanocomposite temperature – from 290 K to 475 K. It was found that an increase in the mixing time of components of nanocomposite materials could lead to a significant (more than 70 times) increase in their thermal conductivity. It is also shown that the influence of the specified time is limited to its value equal to 27 minutes, above which the change in the thermal conductivity of nanocomposites can be neglected. It was found that the sensitivity of the thermal conductivity of nanocomposites to the time of mixing of their components decreases with a decrease in the mass fraction of the filler. Temperature dependences of the specific heat capacity of the studied composites were obtained by varying the mixing time of their components and the mass fraction of the filler. It was found that with an increase in the specified time, there is a decrease in the heat capacity of nanocomposites, which is significantly manifested only in the region of temperatures close to the melting point of the composite matrix. It is shown that the dependence of the density of nanocomposites on the mixing time of their components in qualitative terms is similar to the corresponding dependence for their thermal conductivity. The obtained data can be used to choose the mixing time of components of nanocomposite materials in the development of appropriate technology for their production Виконано комплекс експериментальних досліджень щодо встановлення впливу часу змішування компонентів нанокомпозиційних матеріалів на їхню теплопровідність, питому теплоємність та густину. Дослідженню підлягали фізичні властивості композитів «поліпропілен-вуглецеві нанотрубки». При проведенні експериментів тривалість змішування компонентів у розплаві полімеру змінювалася від 5 до 52 хв, масова частка наповнювача – у діапазоні 0,3…10 % і температура нанокомпозитів – від 290 К до 475 К. Встановлено, що збільшення часу змішування компонентів нанокомпозиційних матеріалів може призводити до суттєвого (більш ніж 70 разів) підвищення їх теплопровідності. Показано також, що вплив зазначеного часу обмежується його значенням 27 хв, при перевищенні якого зміною теплопровідності нанокомпозитів можна знехтувати. Встановлено, що чутливість теплопровідності нанокомпозитів до часу змішування їх компонентів знижується зі зменшенням масової частки наповнювача. Отримано температурні залежності питомої теплоємності досліджуваних композитів при варіюванні часу змішування їх компонентів та масової частки наповнювача. Встановлено, що при підвищенні зазначеного часу має місце зменшення теплоємності нанокомпозитів, яка суттєво проявляється лише в області температур, близьких до температури плавлення композиційної матриці. Показано, що залежність густини нанокомпозитів від часу змішування їх компонентів у якісному відношенні є подібною до відповідної залежності для їх теплопровідності. Отримані дані можуть використовуватися для вибору часу змішування нанокомпозиційних компонентів матеріалів при розробці відповідної технології їх отримання