The conditioning of radioactive waste from nuclear power plants and in some countries even of weapons plutonium is an important issue for science and society. Therefore the research on appropriate matrices for the immobilization of fission products and actinides is of great interest. Beyond the widely used borosilicate glasses, ceramics are promising materials for the conditioning of actinides like U, Np, Pu, Am, and Cm. Monazite-type ceramics with general composition LnPO4 (Ln = La to Gd) and solid solutions of monazite with cheralite or huttonite represent important materials in this field. Monazite appears to be a promising candidate material, especially because of its outstanding properties regarding radiation resistance and chemical durability. This article summarizes the most recent results concerning the characterization of monazite and respective solid solutions and the study of their chemical, thermal, physical and structural properties. The aim is to demonstrate the suitability of monazite as a secure and reliable waste form for actinides.
The reaction of wollastonite (CaSiO3) with CO2 in the presence of aqueous solutions (H2O) and varied temperature conditions (296 K, 323 K, and 333 K) was investigated. The educts (CaSiO3) and the products (CaCO3 and SiO2) were analyzed by scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), and differential scanning calorimetry with thermogravimetry coupled with a mass spectrometer and infrared spectrometer (DSC TG/MS/IR). The reaction rate increased significantly at higher temperatures and seemed less dependent on applied pressure. It could be shown that under the defined conditions wollastonite can be applied as a cementitious material for sealing wells considering CCS applications, because after 24 h the degree of conversion from CaSiO3 to CaCO3 at 333 K was very high (>90%). As anticipated, the most likely application of wollastonite as a cementitious material in CCS would be for sealing the well after injection of CO2 in the reservoir.
Syntheses of Fe-, Co-, and Ni-containing Mg-Al-layered double hydroxides (LDHs) are described here because Fe, Co, and Ni represent the major constituents in steel containers used for storing spent nuclear fuel. Much evidence exists for the formation of LDHs during the corrosion of such containers under repository-relevant conditions. Because of their anion-exchange properties, LDHs can be considered as materials with the potential to retain and immobilize anionic radionuclides. Evaluation of the thermodynamic properties of LDHs is essential for reliable prediction of their behavior (solubility, anion exchange properties) in geochemical environments. The impact on the thermodynamic properties of the isostructural incorporation of divalent cations into the LDH was the main focus of the present study.Mg-Al-Cl-LDH and the Fe-, Co-, and Ni-doped LDHs were synthesized by the co-precipitation method and then characterized (using powder X-ray diffraction (PXRD), extended X-ray absorption fine structure (EXAFS), X-ray absorption near edge structure (XANES), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy energy-dispersive X-ray spectroscopy (SEM-EDX), and thermogravimetric analyses (TGA)).The PXRD and EXAFS analyses indicated that all synthesized samples were pure LDHs where Co, Ni, and Fe were incorporated isostructurally. The EXAFS and XANES results demonstrated that Ni and Co were incorporated as divalent cations and Fe as a trivalent cation. Thermodynamic calculations were performed assuming an equilibrium state between aqueous solutions and corresponding precipitates after synthesis. The first estimates of the molar Gibbs free energies for Fe-, Co-, and Ni-containing LDHs at 70ºC were provided. The calculated Gibbs free energy of the pure Mg-Al-LDH (-3629 kJ/mol) was slightly less than those for Fe-, Co-, and Ni-containing compositions (-3612±50, -3604±50, -3593±50kJ/mol).
7 July 2015 in Journal of Radioanalytical and Nuclear Chemistry