Ceramic materials with high strength and chemical inertness are widely used as engineering materials. However, the brittle nature limits their applications as fracture occurs before the onset of plastic yielding. There has been limited success despite extensive efforts to enhance the deformability of ceramics. Here we report a method for enhancing the room temperature plastic deformability of ceramics by artificially introducing abundant defects into the materials via preloading at elevated temperatures. After the preloading treatment, single crystal (SC) TiO 2 exhibited a substantial increase in deformability, achieving 10% strain at room temperature. SC α-Al 2 O 3 also showed plastic deformability, 6 to 7.5% strain, by using the preloading strategy. These preinjected defects enabled the plastic deformation process of the ceramics at room temperature. These findings suggest a great potential for defect engineering in achieving plasticity in ceramics at room temperature.
11 January 2023 in Materials Science and Engineering: A
Cu-to-Cu thermal compression bonding (TCB) has emerged as a promising solution for ultrafine pitch packaging in 3D integrated circuit technologies. Despite the progress made by conventional Cu-to-Cu TCB methods in achieving good mechanical strength of the Cu bonds, the bonding processes generally require high temperature and high pressure, which may degrade the performance and reliability of the device. Therefore, it is imperative to investigate the processing parameters to understand the bonding mechanism and achieve effective TCB at a low temperature and low pressure. Here, we developed an in situ TCB technique inside a scanning electron microscope. The in situ TCB method enables a real-time observation of bonding development, which provides critical insights into how the texture and microstructure of Cu bumps may influence the creep and surface diffusion during the bonding process. This work features a strategy to advance our understanding of the bonding mechanisms and provides insight into tailoring the microstructure of Cu for bonding at a low temperature and low pressure.
19 June 2024 in Journal of the American Ceramic Society
Alumina (α‐Al 2 O 3 ) is one of the most versatile engineering ceramics, and its mechanical properties have been extensively studied. However, the micromechanical properties of Al 2 O 3 with a fine microstructure are less well understood. Here, we present one of the first investigations that probe the micromechanical properties of fine‐grained polycrystalline Al 2 O 3 fabricated via spark plasma sintering, employing in situ microcompression tests inside a scanning electron microscope. This study explores the influence of temperature variations on the deformation mechanisms, particularly the involvement of microcracks and dislocation activities throughout the deformation process. As temperature rises, substantial deformability occurs in the inherently brittle Al 2 O 3 at intermediate temperature, where the improved plastic deformability mainly arose from prominent dislocation activities accompanied by grain boundary sliding. This study sheds light on understanding the relationship between defect evolution and mechanical behavior in Al 2 O 3 with fine grain sizes.