The main aim of presented article is present methodology how sophisticated products as compressor equipment can be considered and analyzed as a complex technical system which consists of jointly operating components - a set of hardware, software, operational staff and documented information. In process modeling, these components can be in different processes of inputs, outputs, mechanisms (resources) or management. Based on the regulatory requirements for each component of the system, a key indicator efficiency can be identified. This will allow to control the process and make appropriate decisions to improve the system. The application of the proposed methodology for the development and implementation of an integrated management system reduce the cost of resources and significantly improve the quality of the implementation of processes.

Still existing scientific, technical and technological developments to improve the quality of welded joints of metal pipe structures contain contradictions and uncertainty about the effects of alloying elements, such as molybdenum, mechanical and visco-plastic properties, as well as metallographic component joints. All this indicates the need for a systematic study of these problems for the development of rational metallurgical and technological measures to significantly improve the technological and corrosion-mechanical properties of weld metal. Metallographic studies, using laboratory equipment with high identifying ability, found that the doping of weld metal with molybdenum in the amount of 0.2-0.4% causes fragmentation of ferrite-pearlite structure, including carbides Mn and Fe, and also reduces the number and size of non-metallic inclusions – sulfides, oxides and silicates. Moreover, non-metallic inclusions have a dispersed appearance, which promotes plasticization of the structure, which directly increases the viscous-plastic characteristics and resistance of the metal joints to crack formation. Based on the results of metallographic research, the optimum content in the weld metal of the alloyed element – molybdenum, which is 0.2-0.4%, is determined.