This paper assesses the performance of an embankment constructed in 2010 with a stabilised expansive soil. Two types of treatment were employed at construction time: 4% lime and a mix of 2% lime and 3% cement. A sampling campaign was carried out in 2021 to evaluate the long-term performance of the stabilised soil properties. To assess the compressibility of the soil, oedometer tests were carried out on samples from different parts of the embankment. The results were compared to the compression curve of the untreated soil, also sampled in the same embankment. Complementary shrinkage tests were performed to investigate the effect of the treatment on swelling and shrinkage. The obtained results show that the yield stress of the material from the outer part was inferior to 100 kPa, similarly to the yield stress of the untreated soil, demonstrating a strong alteration in the effect of both treatments over time. This alteration was noticeable to a distance of approximately 2 m from the external surface. Beyond this distance, the performance of the soil was comparable to the behaviour of recently treated soil, with yield stresses close to 1000 kPa. These observations, similar for each treatment dosage, raise questions as to the durability of the treatment on the outer part of the backfill.
This paper focuses on the performances of a treated expansive clayey soil sampled on an embankment constructed in 2010. Two types of treatment used during construction are considered: 4% lime as well as a mix of 2% lime and 3% cement. Oedometer tests were carried out on different parts of the embankment, to assess the compressibility of the soil. The results were compared to the compression curve of the untreated soil, also sampled in the same embankment. Several complementary aspects were also investigated (moisture content, dry density,…) to assess the ageing process of the embankment. The obtained results showed that the behaviour of the material from the outer part of the backfill is similar to the mechanical performances of the untreated soil, demonstrating a strong alteration of the effect of both treatments. This alteration is noticeable until a horizontal distance of about two meters from the surface. Beyond this distance, the performance of the soil is comparable to the mechanical behaviour of treated soil. These observations, similar for each treatment dosage, tend to question the durability of the treatment at the edge of the earth structure.
The present experimental study is focused on analysing the degradation processes of the mechanical performances of a lime-stabilised expansive clay exposed to wetting/drying cycles of various amplitude. Fully cured specimens were exposed to several wetting and drying cycles with suction-controlled techniques, and the maximum suction applied during the cycles ranged from 0.30 MPa to 95 MPa. This study highlighted that the main deterioration mechanism of lime-treated expansive soils exposed to cyclic wetting and drying is connected to micro-structural changes whose intensity were controlled by the amplitude of the cycles. The improved understanding of these mechanisms, as provided by this work, has the potential to more effectively forecast the conditions that could promote durability of lime-stabilised expansive soil. <!----> <!----> <!----> <!---->
This paper assesses the performance of an embankment constructed in 2010 with a stabilised expansive soil. Two types of treatment were employed at construction time: 4% lime and a mix of 2% lime and 3% cement. A sampling campaign was carried out in 2021 to evaluate the long-term performance of the stabilised soil properties. To assess the compressibility of the soil, oedometer tests were carried out on samples from different parts of the embankment. The results were compared to the compression curve of the untreated soil, also sampled in the same embankment. Complementary shrinkage tests were performed to investigate the effect of the treatment on swelling and shrinkage. The obtained results showed that the behaviour of the material from the outer part was similar to the mechanical performance of the untreated soil, demonstrating strong alteration in the effect of both treatments over time. This alteration was noticeable to a distance of approximately two metres from the external surface. Beyond this distance, the performance of the soil was comparable to the behaviour of recently treated soil. These observations, similar for each treatment dosage, raise questions as to the durability of the treatment on the outer part of the backfill.
Le traitement à la chaux et/ou au ciment est une solution courante pour améliorer les performances mécaniques des sols fins. Le traitement permet notamment de réduire fortement la susceptibilité des sols argileux au phénomène de retrait et de gonflement. Toutefois, si de nombreuses études en laboratoire ont été réalisées concernant les sols traités, la question de leur évolution in situ n'a été que très peu considérée. Ainsi, les méthodes et procédures existantes ne permettent généralement pas d'évaluer l'altération dues aux conditions environnementales d'un sol traité. La thèse aborde cette problématique par l'étude du remblai expérimental d'Héricourt. Construit en 2010 dans le cadre du projet ANR TerDOUEST, ce remblai est constitué d'une argile considérée comme fortement plastique. Cette argile a été traitée dès sa mise en place à la chaux et/ou au ciment. Un premier diagnostic de l'état du remblai a été effectué 11 ans après la construction de l'ouvrage, par l'intermédiaire de carottages horizontaux et verticaux. La caractérisation hydromécanique de l'argile traitée a été réalisée en menant une campagne d'essais œdométriques. La compressibilité du matériau prélevé par l'intermédiaire du carottage horizontal a été déterminée et a permis d'évaluer l'évolution du comportement mécanique du sol traité en fonction de sa proximité à la surface du talus. Les résultats montrent que les matériaux situés au cœur du remblai ont un comportement mécanique similaire à celui du sol traité en laboratoire après une cure de 180 jours. En revanche, une dégradation progressive des propriétés mécaniques du matériau a été mise en évidence en s'approchant de la partie externe du remblai. Les propriétés mécaniques des matériaux prélevés dans la partie externe étaient équivalentes à celles du sol non traité. L'étude de la microstructure (porosimétrie par intrusion de mercure, microscope électronique à balayage) et de la composition chimique (analyse thermogravimétrique, fluorescence de rayons X) et minéralogique (diffraction de rayon X) du sol traité a été menée afin de comprendre les sollicitations environnementales responsables de l'altération observée en bordure. Le lessivage du traitement a été identifié comme étant en partie responsable de la chute des performances mécaniques mesurées en bordure de l'ouvrage. Des transformations minéralogiques comme la formation de calcite dans les premiers mètres du remblai mettent également en évidence une altération du comportement hydromécanique par carbonatation des phases cimentaires. Le rôle des cycles de séchage et d'humidification dans l'altération mécanique du sol traité a également été étudié. Des éprouvettes provenant de la partie interne de l'ouvrage ont été soumis à des cycles hydriques de différentes succions allant de 0 à 95 MPa. Les résultats ont montré que ces cycles ont un impact majeur sur la performance à long terme des sols traités au-delà d'une certaine amplitude de succion. Le processus de dégradation est principalement une conséquence de la rupture des liaisons cimentaires plutôt que d'autres processus physico-chimiques comme le lessivage du calcium ou la carbonatation. Cette étude a permis une quantification mécanique de l'altération d'une argile traitée prélevée dans un ouvrage expérimental. Le lessivage et la carbonatation du traitement ont été identifiés comme responsables de la dégradation des performances mécaniques au niveau de la partie externe de l'ouvrage. Enfin, l'étude du matériau traité soumis à des cycles hydriques a permis de quantifier leur impact sur le comportement mécanique, tout en déterminant les mécanismes d'altération des effets du traitement.