AKIHIKO CHIBA

Prof. Dr. AKIHIKO CHIBA


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 December 2022 in Metals
Verified
Journal Article
Open access
PDF file
Kenta YamanakaKenta Yamanaka
Kenta Yamanaka
MMManami Mori
Manami Mori
YOYusuke Onuki
Yusuke Onuki
SSShigeo Sato
Shigeo Sato
ACAKIHIKO CHIBA
AKIHIKO CHIBA
Ti–6Al–4V alloys undergo a multiple phase transformation sequence during electron beam powder bed fusion (EB-PBF) additive manufacturing, forming unique dislocation substructures. Thus, determining the dislocation density is crucial for comprehensively understanding the strengthening mechanisms and deformation behavior. This study performed time-of-flight neutron diffraction (TOF-ND) measurements of Ti–6Al–4V alloys prepared via EB-PBF and examined the dislocation density in the as-built and post-processed states using convolutional multiple whole profile (CMWP) fitting. The present TOF-ND/CMWP approach successfully determined the bulk-averaged dislocation density (6.8 × 1013 m−2) in the as-built state for the α-matrix, suggesting a non-negligible contribution of dislocation hardening. The obtained dislocation density values were comparable to those obtained by conventional and synchrotron X-ray diffraction (XRD) measurements, confirming the reliability of the analysis, and indicating that the dislocations in the α-matrix were homogeneously distributed throughout the as-built specimen. However, the negative and positive neutron scattering lengths of Ti and Al, respectively, lowered the diffraction intensity for the Ti–6Al–4V alloys, thereby decreasing the lower limit of the measurable dislocation density and making the analysis difficult.

16 November 2023 in Metallurgical and Materials Transactions A
Verified
Journal Article
Open access
PDF file
Yunwei GuiYunwei Gui
Yunwei Gui
KAKenta Aoyagi
Kenta Aoyagi
Huakang BianHuakang Bian
Huakang Bian
ACAKIHIKO CHIBA
AKIHIKO CHIBA
In this study, based on a novel support vector machine optimization method, a wide processing window for manufacturing defect-free S25C carbon steel by electron beam powder bed fusion (EB-PBF) was identified. Samples with same energy densities exhibited similar microstructures and mechanical properties. One sample showed an optimum strength and elongation combination of 459.3 MPa and 57.6 pct. The pearlite region with irregular cementite particles was the first to crack during deformation, and the cracks gradually expanded into the surrounding area. Ferrite, cellular structures, and pearlite with parallel and straight cementite particles could effectively modulate the deformation by slip and enhance the plasticity of the S25C parts. After quenching, the strength improved to an unprecedented value of 1722.5 MPa owing to the presence of martensite and dislocation entanglements, with an elongation of 16.8 pct. The strength decreased after further tempering, and the plasticity evidently increased, with an optimum strength and elongation combination of 722.7 MPa and 44.2 pct, respectively. The microstructure of tempered sample contained lath martensite, cementite particles, and sparse dislocation lines. These results demonstrate that the current method can serve as a powerful tool for effectively optimizing the high-dimensional parameters of the EB-PBF process to produce carbon steel with excellent mechanical properties.

17 January 2025 in Materials
Verified
Journal Article
Open access
PDF file
NSNaoto Sakurai
Naoto Sakurai
Tomofumi SawadaTomofumi Sawada
Tomofumi Sawada
YKYukinori Kuwajima
Yukinori Kuwajima
Kenta YamanakaKenta Yamanaka
Kenta Yamanaka
NNNaoyuki Nomura
Naoyuki Nomura
STShinji Takemoto
Shinji Takemoto
This study aimed to investigate the release of metallic ions from cobalt–chromium (Co-Cr) alloys fabricated by additive manufacturing (AM) for comparison with dental casting. Co-Cr alloys were fabricated via AM using selective laser melting (SLM) and electron beam melting (EBM) in powder-bed fusion. Polished and mechanically ground specimens were prepared. Each specimen was analyzed using an electron probe microanalyzer (EPMA). Each specimen was immersed in an acidic saline solution for 7 days in accordance with ISO 10271: 2020. The EPMA indicated the segregation of some elements in the as-prepared SLM and EBM specimens, whereas the polished and ground specimens exhibited a homogenous elemental distribution. The total amount of ion release from the SLM and EBM specimens was confirmed to be less than 7 μg/cm2, which was less than 42 μg/cm2 for the cast specimen. The polished and ground specimens exhibited an even lower ion release than the as-prepared specimens. The amount of ions released from the Co-Cr alloy was less than the 200 μg/cm² requirement of ISO 22674: 2022. Co-Cr alloys fabricated by SLM and EBM could provide superior corrosion resistance to cast specimens. AM could be a valuable method for fabricating appliances and denture frameworks in dentistry.

1 October 2023 in Materials
Verified
Journal Article
Open access
PDF file
HWHao Wang
Hao Wang
TMToshimi Miyagi
Toshimi Miyagi
ACAKIHIKO CHIBA
AKIHIKO CHIBA
We investigated the improvement of mechanical properties of biograde Co–28Cr–6Mo–0.11N alloy prepared by electron beam melting through grain refinement via multiple reverse transformations. While the effects of single and double reverse transformation treatments on the microstructure have been investigated in previous studies, we investigated the effects of multiple reverse transformation heat treatments. The particle size was refined to 1/4, and the yield strength, tensile silence strength, and elongation were enhanced to 655 MPa, 1234 MPa, and 45%, respectively, satisfying ASTM F75 standards. Moreover, a mixed phase of ε and γ was observed to provide higher yield strength than a single γ structure. The dominant behavior in the γ → ε phase transformation at 1073 K was obvious. Grain growth was suppressed by the grain-boundary pinning effect of the Cr2N phase during reverse transformation to the γ phase. Because no fracture was caused by precipitates such as σ, η, and Cr2N phases, the influence of the precipitates on the tensile properties was small.

3 August 2023 in Metallurgical and Materials Transactions A
Verified
Journal Article
Open access
PDF file
HWHao Wang
Hao Wang
TMToshimi Miyagi
Toshimi Miyagi
ACAKIHIKO CHIBA
AKIHIKO CHIBA
Mechanical properties of electron-beam-melted biomedical Co–Cr–Mo–N alloys can be improved by the grain refinement from reverse transform treatment, which transforms a low-temperature strong ε-phase into a high-temperature ductile γ-phase. Although mechanical properties of alloys consisting of a single ε- or γ-phase have been previously reported on, those comprising mixed ε- and γ-phases have not yet been investigated. Herein, the heat treatment conditions of the Co–28Cr–6Mo–0.11N alloy were determined to control the phase fraction while obtaining fine grains in the mixed phases with superior mechanical properties. The phase transformation behavior was analyzed. Superior mechanical properties were observed in the mixed phases containing 70 pct γ-phase and 30 pct ε-phase. The tensile and yield strengths were higher, and the elongation was approximately the same, compared to that of the single γ-phase. Moreover, the 30 pct ε-phase mixed-phase material obtained during the γ → ε heat treatment had a smaller overall average grain size and showed superior mechanical properties than that obtained during the ε → γ heat treatment. This study is expected to facilitate the application of biomedical Co–Cr–Mo–N alloys with fine grains and superior mechanical properties obtained via heat treatment.

28 July 2023
Verified
Book Chapter
Closed access
PDF file
SNShinji Nishiwaki
Shinji Nishiwaki
SYShu Yamashita
Shu Yamashita
ACAKIHIKO CHIBA
AKIHIKO CHIBA
THTakao Horiya
Takao Horiya