The present investigation represents a concrete example of complete valorization of Eucalyptus nitens biomass, in the framework of the circular economy. Autohydrolyzed-delignified Eucalyptus nitens was employed as a cheap cellulose-rich feedstock in the direct alcoholysis to n-butyl levulinate, adopting n-butanol as green reagent/reaction medium, very dilute sulfuric acid as a homogeneous catalyst, and different heating systems. The effect of the main reaction parameters to give n-butyl levulinate was investigated to check the feasibility of this reaction and identify the coarse ranges of the main operating variables of greater relevance. High n-butyl levulinate molar yields (35–40 mol%) were achieved under microwave and traditional heating, even using a very high biomass loading (20 wt%), an eligible aspect from the perspective of the high gravity approach. The possibility of reprocessing the reaction mixture deriving from the optimized experiment by the addition of fresh biomass was evaluated, achieving the maximum n-butyl levulinate concentration of about 85 g/L after only one microwave reprocessing of the mother liquor, the highest value hitherto reported starting from real biomass. The alcoholysis reaction was further optimized by Response Surface Methodology, setting a Face-Centered Central Composite Design, which was experimentally validated at the optimal operating conditions for the n-butyl levulinate production. Finally, a preliminary study of diesel engine performances and emissions for a model mixture with analogous composition to that produced from the butanolysis reaction was performed, confirming its potential application as an additive for diesel fuel, without separation of each component.
26 September 2024 in International Journal of Hydrogen Energy
The transition from fossil resources to renewable ones represents a pressing need. The acidogenic fermentation of biomass-derived ethanol to carboxylic acids represents a novel and smart possibility, opening the way for the production of further value-added bio-products through cascade chemical approaches. In this work, the hydrogenation of commercial hexanoic acid to give 1-hexanol/hexyl hexanoate mixtures was preliminary studied in the presence of commercial rhenium catalysts (Re2O7 and 5 wt% Re/C), which resulted as mainly active and selective towards 1-hexanol. On the other hand, the use of niobium phosphate as the acid co-catalyst markedly shifted the selectivity towards hexyl hexanoate. Moreover, 5 wt% Re/C and physical mixtures of (5 wt% Re/C + niobium phosphate) were further tested for the hydrogenation of crude hexanoic acid obtained through fermentation of white grape pomace, confirming the promising performance of these catalytic systems and their recyclability. For the first time, the employment of 1-hexanol/hexyl hexanoate mixtures as a diesel blendstock was evaluated, highlighting a significant reduction of soot and CO emissions, without any significant change in the engine performance. The promising properties of these oxygenated additives are favorable for the partial replacement of traditional fossil fuels, in accordance with the short-term goals of EU countries.