Annular lithography is a recently introduced, flexible technique that has been tailored to the fabrication of rotationally symmetric optical structures in the meso and micro range. The optical concept for the exposure tool is based on a combination of axicons with movable components that create a ring-shaped light distribution with variable diameter in the image plane. This contribution demonstrates for the first time the use of gray tone exposure in annular lithography to fabricate continuous relief structures, overcoming the previous limitation using binary structures. For the controlled exposure of the continuous relief structures, the sensitivity curve of the resist, the exposure dose decreasing with increasing ring diameter, and the exposure time have to be considered. A control and simulation tool is introduced to provide radius-dependent exposure data and, furthermore, to control and iteratively improve the fabricated structures. To demonstrate the gray tone capabilities, various diffractive elements as well as refractive spherical and aspherical elements with a maximum diameter of ~6 mm and a maximum height of 4 µm are shown as examples. Profile shape measurements of fabricated elements show good agreement with the expectations.

To accurately model the specific detection characteristics of spectral sensors based on linear variable filters (LVFs) within an optical design tool, it is essential to consider crucial position-variable spectral properties, such as peak transmittance, central wavelength, half width, or slope steepness. In this context, we propose a straightforward approach, integrating a dynamic link library (DLL) containing all position-dependent spectral properties of the LVF into a commercial optical design software. Exemplary investigations are conducted for an LVF with a detection range of 450–850 nm. For ease of use, the measured position-, wavelength-, and angle-dependent transmission properties of the LVF have been described through a simple yet highly accurate model system. Moreover, to highlight the essential value of this simulation for specific applications, an efficiency-enhancing spectral module is simulated, which is an LVF-mirror arrangement characterized by a multiple-reflected beam path. The introduced optical design tool demonstrates its particular strength by enabling the optimization of the highest detection efficiency for either the short- or long-wavelength range.

This paper presents an advanced exposure system that, we believe, for the first time, enables annular lithography to create micro- and mesostructures on curved surfaces. The principle of ring creation is based on an axicon zoom system whereas the exposure tool exhibits several features that enhance its performance over previous models. Its optical design features a high numerical aperture, resulting in narrow ring widths and high resolution. Additionally, the ring diameter, which can be varied between 400 µm and 8 mm, remains constant along the optical axis due to telecentric imaging. Further functional components include an observation unit for alignment and monitoring, as well as an integrated autofocus system. In addition to determining the exposure ring width (∼ 10 µm), diffractive lenses on planar substrates as well as on a spherical lens with a radius of curvature of 68.8 mm were structured. The periods of the diffractive structure varied between 60 µm and 460 µm.

A comprehensive schematic eye model of the hooded merganser is introduced for the first time to advance the understanding of amphibious vision. It is comprised of two different configurations, the first one modeling its visual system in air (unaccommodated state) and the second one representing the case where the eye is immersed in water (accommodated state). The model was designed using available data of former studies, image analysis and the implementation of feasible assumptions that serve as starting values. An optimization process incorporating an optical design program is used to vary the starting values with the aim of finding the setup offering the best acuity. The image quality was measured using the root-mean-square radius of the focal spot formed on the retina. The resulting schematic eye model comprises all relevant optical specifications, including aspherical geometrical parameters for cornea and lens, distances between the surfaces, the gradient index distribution of the lens, the retinal specifications and the object distance in both media. It achieves a spot radius of 4.20 mu m for the unaccommodated state, which meets the expectations derived by the mean ganglion cell density and comparison with other animals. In contrast, under water the determined spot radius of 11.48 mu m indicates an acuity loss. As well as enhancing our understanding of the vision of the hooded merganser, the schematic eye model may also serve as a simulation basis for examing similar animal eyes, such as the cormorant or other fish hunting birds.