Brian Jun Lee

Prof. Brian Jun Lee

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 September 2021 in Proceedings of the National Academy of Sciences
Verified
Journal Article
Open access
PDF file
CCCassie Caudill
Cassie Caudill
JPJillian Perry
Jillian Perry
KIKimon Iliadis
Kimon Iliadis
ATAddis T. Tessema
Addis T. Tessema
BLBrian Jun Lee
Brian Jun Lee
JDJoseph M. DeSimone
Joseph M. DeSimone
Vaccination is an essential public health measure for infectious disease prevention. The exposure of the immune system to vaccine formulations with the appropriate kinetics is critical for inducing protective immunity. In this work, faceted microneedle arrays were designed and fabricated utilizing a three-dimensional (3D)-printing technique called continuous liquid interface production (CLIP). The faceted microneedle design resulted in increased surface area as compared with the smooth square pyramidal design, ultimately leading to enhanced surface coating of model vaccine components (ovalbumin and CpG). Utilizing fluorescent tags and live-animal imaging, we evaluated in vivo cargo retention and bioavailability in mice as a function of route of delivery. Compared with subcutaneous bolus injection of the soluble components, microneedle transdermal delivery not only resulted in enhanced cargo retention in the skin but also improved immune cell activation in the draining lymph nodes. Furthermore, the microneedle vaccine induced a potent humoral immune response, with higher total IgG (Immunoglobulin G) and a more balanced IgG1/IgG2a repertoire and achieved dose sparing. Furthermore, it elicited T cell responses as characterized by functional cytotoxic CD8+ T cells and CD4+ T cells secreting Th1 (T helper type 1)-cytokines. Taken together, CLIP 3D–printed microneedles coated with vaccine components provide a useful platform for a noninvasive, self-applicable vaccination. Significance Vaccination is essential for combatting emerging epidemics and pandemics. Microneedle patches designed to precisely deliver cargos into the intradermal space, rich in immune cells, provide a noninvasive and self-applicable vaccination approach, eliminating the need for hypodermic needles and trained medical personnel for vaccine administration. Here, we show that advanced 3D printing methods allow for the manufacturing of polymeric microneedles of controlled geometries (difficult to manufacture using traditional methods) designed to enhance vaccine component coating. Using model vaccine components, we demonstrated that 3D-printed microneedle delivery resulted in enhanced cargo retention in the skin, activation of immune cells, and more potent humoral and cellular immune responses as compared with traditional vaccination routes.

30 September 2022 in Science Advances
Verified
Journal Article
Open access
GLGabriel Lipkowitz
Gabriel Lipkowitz
TSTim Samuelsen
Tim Samuelsen
KHKaiwen Hsiao
Kaiwen Hsiao
BLBrian Jun Lee
Brian Jun Lee
Maria DulayMaria Dulay
Maria Dulay
JDJoseph M. DeSimone
Joseph M. DeSimone
In additive manufacturing, it is imperative to increase print speeds, use higher-viscosity resins, and print with multiple different resins simultaneously. To this end, we introduce a previously unexplored ultraviolet-based photopolymerization three-dimensional printing process. The method exploits a continuous liquid interface—the dead zone—mechanically fed with resin at elevated pressures through microfluidic channels dynamically created and integral to the growing part. Through this mass transport control, injection continuous liquid interface production, or iCLIP, can accelerate printing speeds to 5- to 10-fold over current methods such as CLIP, can use resins an order of magnitude more viscous than CLIP, and can readily pattern a single heterogeneous object with different resins in all Cartesian coordinates. We characterize the process parameters governing iCLIP and demonstrate use cases for rapidly printing carbon nanotube–filled composites, multimaterial features with length scales spanning several orders of magnitude, and lattices with tunable moduli and energy absorption.

16 November 2022 in Science Advances
Verified
Journal Article
Open access
KHKaiwen Hsiao
Kaiwen Hsiao
BLBrian Jun Lee
Brian Jun Lee
TSTim Samuelsen
Tim Samuelsen
GLGabriel Lipkowitz
Gabriel Lipkowitz
JKJason M. Kronenfeld
Jason M. Kronenfeld
JDJoseph M. DeSimone
Joseph M. DeSimone
To date, a compromise between resolution and print speed has rendered most high-resolution additive manufacturing technologies unscalable with limited applications. By combining a reduction lens optics system for single-digit-micrometer resolution, an in-line camera system for contrast-based sharpness optimization, and continuous liquid interface production (CLIP) technology for high scalability, we introduce a single-digit-micrometer-resolution CLIP-based 3D printer that can create millimeter-scale 3D prints with single-digit-micrometer-resolution features in just a few minutes. A simulation model is developed in parallel to probe the fundamental governing principles in optics, chemical kinetics, and mass transport in the 3D printing process. A print strategy with tunable parameters informed by the simulation model is adopted to achieve both the optimal resolution and the maximum print speed. Together, the high-resolution 3D CLIP printer has opened the door to various applications including, but not limited to, biomedical, MEMS, and microelectronics.

3 July 2018 in IEEE Transactions on Radiation and Plasma Medical Sciences
Verified
Journal Article
Closed access
CCChen-Ming Chang
Chen-Ming Chang
BLBrian Jun Lee
Brian Jun Lee
AGAlexander M. Grant
Alexander M. Grant
AGAndrew N. Groll
Andrew N. Groll
CLCraig S. Levin
Craig S. Levin
Hybrid positron emission tomography (PET)/magnetic resonance imaging (MRI) has risen to the cutting edge of medical imaging technology as it allows simultaneous acquisition of structural, functional, and molecular information of the patient. A PET insert that can be installed into existing MR systems can in principle reduce the cost barriers for an existing MR site to achieve simultaneous PET/MRI compared to procuring an integrated PET+MRI system. The PET insert systems developed so far for PET/MRI require the radio-frequency (RF) transmitter coil to reside inside the PET ring as those PET inserts block the RF fields from the MRI system. Here we report for the first time on the performance of a full-ring brain-sized “RF-penetrable” PET insert we have recently completed. This insert allows the RF fields generated by the built-in body coil to penetrate the PET ring. The PET insert comprises a ring of 16 detector modules employing electro-optical coupled signal transmission and a multiplexing framework based on compressed sensing. Energy resolution, coincidence timing resolution (CTR), photopeak position, and coincidence count rate were acquired outside and inside a 3-Tesla MRI system under simultaneous acquisition to evaluate the impact of MRI on the PET performance. Coincidence count rate performance was evaluated by acquiring a cylinder source with high initial activity decaying over time. Tomographic imaging of two phantoms, a custom 6.5-cm diameter resolution phantom with hot rods of four different sizes (2.8-, 3.2-, 4.2-, and 5.2-mm diameter) and a 3-D Hoffman brain phantom, were performed to evaluate the imaging capability of the PET insert. The energy resolution at 511 keV and CTR acquired by the PET insert were 16.2 ± 0.1% and 5.3 ± 0.1 ns full width at half maximum, respectively, and remained stable during MRI operation except when the echo planar imaging (EPI) sequence was applied. The PET system starts to show saturation in coincidence count rate at 2.76 million photon counts per second. Most of the 2.8-mm diameter hot rods and main features of the 3-D Hoffman brain phantom were resolved by the PET insert, demonstrating its high spatial resolution and capability to image a complex tracer distribution mimicking that seen in the human brain.

1 January 2013
Verified
Conference Paper
Closed access
CCChia-Fang Chiang
Chia-Fang Chiang
AGAndrew B. Graham
Andrew B. Graham
BLBrian Jun Lee
Brian Jun Lee
CAChae Hyuck Ahn
Chae Hyuck Ahn
ENEldwin J. Ng
Eldwin J. Ng
TKThomas W. Kenny
Thomas W. Kenny
Temperature and package stress induced errors pose a challenging obstacle for improving accuracy of strain-based resonant pressure sensors. This paper presents a multiple sensor solution where three resonators were built under a shared pressure sensor diaphragm. By manipulating the anchoring scheme and the location of the resonators, temperature and stress signals can be independently captured and used to compensate for the errors in the pressure signal. After compensation, the pressure sensor showed a 20× reduction in temperature dependency and a 2× reduction in stress dependency.

1 June 2013
Verified
Conference Paper
Closed access
CAC. H. Ahn
C. H. Ahn
ENE. J. Ng
E. J. Ng
VHV. A. Hong
V. A. Hong
YYY. Yang
Y. Yang
BLBrian Jun Lee
Brian Jun Lee
TKT. W. Kenny
T. W. Kenny
In this paper, we show two methods for modifying the design of a Disk Resonating Gyroscope (DRG) to compensate for the mechanical anisotropy in single crystal silicon. This method is validated through experimental characterization of more than 70 different devices. With the proposed methods, the frequency split of the 250kHz DRG “wineglass” modes in single crystal silicon was reduced from >10kHz to as los as 96Hz without any electrostatic tuning. These results allow development of high-performance miniature DRGs tuned for degenerate-mode operation from high-quality crystalline silicon material.