For the purpose of reducing power consumption of a leg exoskeleton for augmenting human performance, a novel hybrid hydraulic system (HHS) which includes a unidirectional servo valve and a solenoid on-off valve is excogitated, and its energy saving control is studied in this paper. Inspired by the varieties of contact force between human leg and ground during walking, the unidirectional servo valve and the solenoid on-off valve are only activated in the stance phase and the swing phase, respectively. In the stance phase, a robust repetitive learning scheme is presented by using the backstepping technique for the unidirectional servo valve, aiming to track the periodic human leg movement, and in the swing phase, an on-off control is proposed for the solenoid valve to release the pressure in the hydraulic cylinder so that the exoskeleton leg is bent by the human leg passively. The proposed control strategy is implemented in an ARM-based embedded microprocessor and the control performance is verified via experiment on the developed exoskeleton robot. The experimental results show that the power consumption of the proposed system is almost 30% less than that of systems with bidirectional hydraulic system.
10 December 2022 in International Journal of Control, Automation, and Systems
This paper studies the transient and steady performance constraints on flexible joint manipulator system with exogenous disturbance, and proposes a fixed-time prescribe performance tracking control method based on the singular perturbation model. For the fast subsystem, a subcontroller with superior transient performance is proposed that guarantees the suppression of flexible vibration in fixed-time. The remaining slow subsystem can be linked with rigid methods to achieve output constraints, a type of time-varying error constraint boundary is first constructed, which broadens the initial error constraint boundary of the time-varying tangent barrier Lyapunov function. Then, a slow subcontroller based on a non-singular fast-integration terminal sliding mode is constructed to make any initial tracking error converge in fixed-time. Finally, a nonlinear disturbance observer is used to counteract the exogenous disturbance. The simulation results show that the controller achieves the prescribe performance.
6 January 2021 in Mathematical Problems in Engineering
This paper aims at the trajectory tracking problem of robot manipulators performing repetitive tasks in task space. Two control schemes are presented to conduct trajectory tracking tasks under uncertain conditions including unmodeled dynamics of robot and additional disturbances. The first controller, pure adaptive iterative learning control (AILC), is based upon the use of a proportional-derivative-like (PD-like) feedback structure, and its design seems very simple in the sense that the only requirement on the learning gain and control parameters is the positive definiteness condition. The second controller is designed with a combination of AILC and neural networks (NNs) where the AILC is adopted to learn the periodic uncertainties that attribute to the repetitive motion of robot manipulators while the add-on NNs are used to approximate and compensate all nonperiodic ones. Moreover, a combined error factor (CEF), which is composed of the weighted sum of tracking error and its derivative, is designed for network updating law to improve the learning speed as well as tracking accuracy of the system. Stabilities of the controllers and convergence are proved rigorously by a Lyapunov-like composite energy function. The simulations performed on two-link manipulator are provided to verify the effectiveness of the proposed controllers. The results of compared simulations illustrate that our proposed control schemes can significantly conduct trajectory tracking tasks.
Motivated by human behavior, dividing inpainting tasks into structure reconstruction and texture generation helps to simplify restoration process and avoid distorted structures and blurry textures. However, most of tasks are ineffective for dealing with large continuous holes. In this paper, we devise a parallel adaptive guidance network(PAGN), which repairs structures and enriches textures through parallel branches, and several intermediate-level representations in different branches guide each other via the vertical skip connection and the guidance filter, ensuring that each branch only leverages the desirable features of another and outputs high-quality contents. Considering that the larger the missing regions are, less information is available. We promote the joint-contextual attention mechanism(Joint-CAM), which explores the connection between unknown and known patches by measuring their similarity at the same scale and at different scales, to utilize the existing messages fully. Since strong feature representation is essential for generating visually realistic and semantically reasonable contents in the missing regions, we further design attention-based multiscale perceptual res2blcok(AMPR) in the bottleneck that extracts features of various sizes at granular levels and obtains relatively precise object locations. Experiments on the public datasets CelebA-HQ, Places2, and Paris show that our proposed model is superior to state-of-the-art models, especially for filling large holes.