To investigate the dynamic response and validate the structural integrity of a spent fuel transportation cask under the 9 m drop condition, a 1/3 scale model was utilized in a 9 m side drop test, considering the constraints of development cost and test facilities. The relationship between the response variables of the scaled model and the prototype model is obtained by Π theorem under impact drop conditions. The influencing parameters for the scale model of spent fuel transport cask drop were systematically discussed. Several numerical models of varying scales are used for verification. Finally, the 9 m drop test of the 1/3 scale model was conducted to compare the acceleration response and deformation of the 1/3 scale numerical model. The study concludes that the acceleration and deformation of the numerical model closely match the test results, and the numerical model of the prototype model represents the dynamic response of the prototype model. Furthermore, the study examined the reflections of the scale model in comparison to the real model, taking into account the dispersity of wood material and strain rate. The analysis and conclusions can be applied in engineering practice and can inspire subsequent cask designs, especially for a scaled model.
We have developed a micro-infrared photoelastic system to evaluate the stress of through-silicon-vias (TSV). It was found that the stresses of some TSVs increased after thermal cycling, and the scanning electron microscope revealed that those TSVs with stress increased had Cu filler pumped under thermal loading, but no interfacial fracture were observed. Then the annealed samples were heated up to 400°C and stresses of those TSVs were monitored during thermal cycling in real time mode. It was observed that stress of those TSVs decreased first and then increased again. However, with the continuous increase of temperature, the stress of each TSV finally vanished at different temperatures and their stress-free states were kept until 400C was reached. During and after the cooling process, photo-elastic fringes pattern appeared around each TSV again and some fringes became even brighter than before, which indicated that the stress of some TSVs had increased after experiencing another high temperature cycling.
16 October 2025 in Nuclear Engineering and Technology