This paper presents the integration of multimodal sensor systems for an autonomous forestry machine. The utilized technology is housed in a single enclosure which consolidates a set of components responsible for executing machine control actions and comprehending its behavior in various scenarios. This sensor box, named Sentry, will subsequently be connected to a forestry machine from MDB, model LV600 PRO. The article outlines previous work in this field and then details the integration and operation of the equipment, integrated into the forest machine, providing descriptions of the adopted architecture at both the hardware and software levels. The gathered data enables the assessment of the forestry machine’s orientation and position based on the information collected by the sensors. Finally, practical experiments are presented to demonstrate the system’s behavior and to analyze the methods to be employed for autonomous navigation, thereby assessing the performance of the established architecture. The novel aspects of this work include the physical and digital integration of a multimodal sensor system on a forestry machine, its use in a real case scenario, namely, forest vegetation removal, and the strategies adopted to improve the machine localization and navigation performance on unstructured environments.

This paper presents the development of fleet management software for mobile robots, including AGV and AMR technologies, within the scope of a case study from the GreenAuto project. The system was designed to integrate position and status data from different robots, unifying this information into a single map. To achieve this, a web-based platform was developed to allow the simultaneous, real-time visualization of all robots in operation. However, the main challenge of this research lies in the heterogeneity of the fleet, which comprises robots of different makes and models from various manufacturers, each using distinct data formats. The proposed approach addresses this by facilitating fleet monitoring and management, ensuring a greater efficiency and coordination in the robot movement. The results demonstrate that the platform improves the traceability and operational supervision, promoting the optimized management of mobile robots. It is concluded that the proposed solution contributes to industrial automation by providing an intuitive and centralized interface, enabling future expansions for new functionalities and the integration with other emerging technologies. The proposed system demonstrated efficiency in updating and supervising operations, with an average latency of 120 ms for task status updates and an interface refresh rate of less than 1 s, enabling near real-time supervision and facilitating operational decision-making.

In this article, we describe a performance comparison conducted between several digital filters intended to mitigate the intrinsic noise observed in magnetometers. The considered filters were used to smooth the control signals derived from the magnetometers, which were present in an autonomous forestry machine. Three moving average FIR filters, based on rectangular Bartlett and Hanning windows, and an exponential moving average IIR filter were selected and analyzed. The trade-off between the noise reduction factor and the latency of the proposed filters was also investigated, taking into account the crucial importance of latency on real-time applications and control algorithms. Thus, a maximum latency value was used in the filter design procedure instead of the usual filter order. The experimental results and simulations show that the linear decay moving average (LDMA) and the raised cosine moving average (RCMA) filters outperformed the simple moving average (SMA) and the exponential moving average (EMA) in terms of noise reduction, for a fixed latency value, allowing a more accurate heading angle calculation and position control mechanism for autonomous and unmanned ground vehicles (UGVs).

Forest fires are becoming increasingly common, and they are devastating, fueled by the effects of global warming, such as a dryer climate, dryer vegetation, and higher temperatures. Vegetation management through selective removal is a preventive measure which creates discontinuities that will facilitate fire containment and reduce its intensity and rate of spread. However, such a method requires vast amounts of biomass fuels to be removed, over large areas, which can only be achieved through mechanized means, such as through using forestry mulching machines. This dangerous job is also highly dependent on skilled workers, making it an ideal case for novel autonomous robotic systems. This article presents the development of a universal perception, control, and navigation system for forestry machines. The selection of hardware (sensors and controllers) and data-integration and -navigation algorithms are central components of this integrated system development. Sensor fusion methods, operating using ROS, allow the distributed interconnection of all sensors and actuators. The results highlight the system’s robustness when applied to the mulching machine, ensuring navigational and operational accuracy in forestry operations. This novel technological solution enhances the efficiency of forest maintenance while reducing the risk exposure to forestry workers.

This paper presents a method for position correction in collaborative robots, applied to a case study in an industrial environment. The case study is aligned with the GreenAuto project and aims to optimize industrial processes through the integration of various hardware elements. The case study focuses on tightening a specific number of nuts onto bolts located on a partition plate, referred to as “Cloison”, which is mounted on commercial vans produced by Stellantis, to secure the plate. The main challenge lies in deviations that may occur in the plate during its assembly process, leading to uncertainties in its fastening to the vehicles. To address this and optimize the process, a collaborative robot was integrated with a 3D vision system and a screwdriving system. By using the 3D vision system, it is possible to determine the bolts’ positions and adjust them within the robot’s frame of reference, enabling the screwdriving system to tighten the nuts accurately. Thus, the proposed method aims to integrate these different systems to tighten the nuts effectively, regardless of the deviations that may arise in the plate during assembly.

The autonomous navigation of unmanned ground vehicles (UGVs) in unstructured environments, such as agricultural or forestry settings, has been the subject of extensive research by various investigators. The navigation capability of a UGV in unstructured environments requires considering numerous factors, including the quality of data reception that allows reliable interpretation of what the UGV perceives in a given environment, as well as the use these data to control the UGV’s navigation. This article aims to study different PID control algorithms to enable autonomous navigation on a robotic platform. The robotic platform consists of a forestry tractor, used for forest cleaning tasks, which was converted into a UGV through the integration of sensors. Using sensor data, the UGV’s position and orientation are obtained and utilized for navigation by inputting these data into a PID control algorithm. The correct choice of PID control algorithm involved the study, analysis, and implementation of different controllers, leading to the conclusion that the Vector Field control algorithm demonstrated better performance compared to the others studied and implemented in this paper.